YOKOGAWA YFGW410 User manual

User’s
Manual
YFGW410
Field Wireless
Management Station
Read Me First
IM 01W02D01-11EN
IM 01W02D01-11EN
5th Edition
This document species the important information to use this product correctly and
safely and the License Agreement of Attached Software for YFGW410 Field Wireless Man-
agement Station.
Before use the product, be sure to read this document rst.
Contents
Introduction...................................................................................................2
Safety Precautions .......................................................................................4
Explosion Protected Type Specications ..............................................11
How to Use Online Manual ....................................................................... 15
Preparation to Use YFGW410 Attached Software ................................. 15
Copyright and Trademark Notices .......................................................... 16
Patent Notice ............................................................................................. 16
Third Party Software ................................................................................. 17
About User’s Manual................................................................................. 18
Information of User’s Manual Revision .................................................. 18
YFGW410 Software License Agreement................................................. 19

2
<Read Me First>
IM 01W02D01-11EN
Introduction
This manual (IM 01W02D01-11EN) describes the safety precautions, explosion protected
type specications and the license agreement of attached software for the YFGW410.
There are three documents including this one for the YFGW410 listed below. Read them
along with this manual.
Document No. Document name Description
IM01W02D01-01EN YFGW410
Field Wireless
Management Station
This manual is stored in the attached DVD-ROM for
YFGW410. It describes installation, wiring, operation,
maintenance and specication of the YFGW410.
IM01W02D01-11EN YFGW410
Field Wireless
Management Station
Read Me First
This manual. It describes the safety precaution, explosion
protected type specications and the license agreement of
the attached software for the YFGW410.
IM 01W02D01-21EN YFGW410
PROFINET Interface
This manual is stored in the attached DVD-ROM for
YFGW410. It describes operation and specication of the
YFGW410 PROFINET Interface.
GS01W02D1-01EN YFGW410
Field Wireless
Management Station
Product specication including detailed model and sufx
code, optional specications and accessory of YFGW410.
nRegarding This User's Manual
l This manual should be provided to the end user. Please recommend end users
to keep this manual at hand and refer to it as needed.
l This manual and the identication tag attached on packing box are essential
parts of the product; keep them in a safe place for future reference.
l Before use, read this manual thoroughly to comprehend its contents.
l The purpose of the User’s Manual is to describe details of functions provided
in this product, not to warrant the product's suitability to the specic purposes
of customers.
l No part of this manual may be reproduced in any form without Yokogawa's
written permission.
l The contents of this manual may be changed without prior notice.
l All reasonable effort has been made to ensure the accuracy of the contents of
this manual. However, if any errors or omissions are found, please inform any
of sales ofces listed on the back cover or your local distributor.
l The specications covered by this manual are limited to those for the standard
type under the specied model number break-down and do not cover custom-
made instruments. When products whose sufx code or optional codes con-
tain code “Z” and an exclusive document is attached, please read it along with
this manual.
l Please note that this User’s Manual may not be revised for any specication
changes, construction changes or operating part changes that are not consid-
ered to affect function or performance.

3
<Read Me First>
IM 01W02D01-11EN
n ATEX Documentation
lThis is only applicable to the countries in European Union.
GB
DK
I
E
NL
SF
P
F
D
S
LT
LV
PL
EST
SLO
H
BG
RO
M
CZ
SK
GR

4
<Read Me First>
IM 01W02D01-11EN
Safety Precautions
n Safety, Protection, and Modication of the Product
l In order to protect the operator, product, and system controlled by the prod-
uct, observe the safety precautions described in this User’s Manual. If users
handle contrary to these instructions, we can not guarantee the safety.
l If this instrument is used in a manner not specied in this User’s Manual, the
protection provided by this instrument may be impaired.
l Modication of the product is strictly prohibited.
l If customers attempt to repair or modify explosion protected type products
and fail to return them to their original state, the explosion protected structure
of this product will be lost, resulting in a hazardous state. All repairs and modi-
cations of the product must be consulted with Yokogawa.
l If any protection or safety circuit is required for the system controlled by the
product or for the product itself, prepares it separately.
l Be sure to use the spare parts approved by Yokogawa Electric Corporation
(hereafter simply referred to as Yokogawa) when replacing parts or consuma-
bles.
l The following symbols are used in the product and User’s Manual to indicate
that there are precautions for safety:
CAUTION
Indicates that caution is required for operation. This symbol is placed on the parts necessary to
refer to the User’s Manual for protecting the operator and equipment. In the User’s Manual you
will nd precautions to avoid physical injury or death of the operator, including electrical shocks,
injuries of human body, and so on.
WARNING
Indicates instructions that must be observed in order to prevent the software or hardware from
being damaged or the system from becoming faulty.
IMPORTANT
Indicates important information required to understand operations or functions.

5
<Read Me First>
IM 01W02D01-11EN
NOTE
Draws attention to information essential for understanding the operation and features.
TIP Indicates additional information.
SEE
ALSO
Indicates a source to refer to
Indicates a protective grounding terminal. Before using the product, ground the terminal.
Indicates a functional grounding terminal. Before using the product, ground the terminal.
Indicates a DC supply
n Safe Use of This Product
This product is designed to be used by a person with specialized knowledge. For the safety of the
operator and to protect this product and the system, please be sure to follow this manual’s safety
instructions when handling this product. If these instructions are not heeded, the protection pro-
vided by this product may be impaired. In this case, Yokogawa cannot guarantee that this product
can be safely operated. Please pay special attention to the following points:
(a) Installation
• This instrument may only be installed by an engineer or technician who has an expert
knowledge of this device. Operators are not allowed to carry out installation unless they
meet this condition.
• All installation shall comply with local installation requirements and the local electrical code.
(b) Wiring
• The instrument must be installed by an engineer or technician who has an expert knowl-
edge of this instrument. Operators are not permitted to carry out wiring unless they meet
this condition. All installation shall comply with local installation requirements and the local
electrical code.
(c) Operation
CAUTION
When ambient temperature is beyond 50°C, a temperature of the surface is very high. Please be
careful not to touch with bare hands.
(d) Maintenance
• Please carry out only the maintenance procedures described in this manual. If you require
further assistance, please contact the nearest Yokogawa ofce.

6
<Read Me First>
IM 01W02D01-11EN
(e) Explosion Protected Instrument
• Users of explosion protected instruments should refer rst to “Explosion Protected type
Specication” section of this manual.
• The use of this instrument is restricted to those who have received appropriate training in
the device.
• Take care not to create sparks when accessing the instrument or peripheral devices in a
hazardous location.
• Repair or modication to this instrument by customer will cause malfunction of explosion
protect function and hazardous situation. If you need to repair or modication, please con-
tact the nearest Yokogawa ofce.
(f) Modication
• Yokogawa will not be liable for malfunctions or damage resulting from any modication
made to this instrument by the customer.
(g) Product Disposal
• The instrument should be disposed of in accordance with local and national legislation/
regulations.
• Batteries are included in this product. Batteries in this product cannot be removed by your-
self. Dispose of them together with this product.
• The following is an explanation about the new EU Battery Directive (DIRECTIVE 2006/66/
EC). This directive is only valid in the EU.
• If you dispose of this product within the EU, contact your local Yokogawa Europe B.V. ofce.
Do not dispose of them as domestic household waste.
Battery type: lithium thionyl chloride primary battery
CAUTION
The symbol (see above) means they shall be sorted out and collected as ordained in ANNEX II in
DIRECTIVE 2006/66/EC.
(h) Authorized Representative in EEA
• The Authorized Representative for this product in the EEA is:
Yokogawa Europe B.V.
Euroweg 2, 3825 HD Amersfoort, The Netherlands

7
<Read Me First>
IM 01W02D01-11EN
n Warranty
l The warranty terms of this instrument are described in the quotation. We will
make any repairs that may become necessary during the guaranteed term free
of charge.
l Please contact our sales ofce or your local distributor if this instrument re-
quires repair.
l If the instrument is faulty, contact us with complete details about the prob-
lem and the length of time it has been faulty, and state the model and serial
number. We would appreciate the inclusion of drawings or additional informa-
tion.
l The results of our examination will determine whether the product will be re-
paired free of charge or on an at-cost basis.
n The guarantee will not apply in the following cases:
l Damage due to negligence or insufcient maintenance on the part of the cus-
tomer.
l Problems or damage resulting from handling, operation or storage that vio-
lates the intended use and specications.
l Problems that result from using or performing maintenance on the instrument
in a location that does not comply with the installation location specied by
Yokogawa.
l Problems or damage resulting from repairs or modications not performed by
Yokogawa or someone authorized by Yokogawa.
l Problems or damage resulting from inappropriate installation after delivery.
l Problems or damage resulting from disasters such as res, earthquakes,
storms, oods, or lightning strikes and external causes.
n Warranty and Disclaimer
l Yokogawa assumes no responsibilities for this product except as stated in the
warranty.
l Yokogawa shall have neither liability nor responsibility to any person or entity
with respect to any direct or indirect loss or damage arising from using the
product or any defect of the product that Yokogawa can not predict in ad-
vance.

8
<Read Me First>
IM 01W02D01-11EN
n Notes on Hardware
l Appearance and Accessories
Check the following when you receive the product:
• Appearance
• Standard accessories
Contact our sales representative or your local distributor if the product’s coating has come off or
any accessories are missing.
l Model and Sufx Codes
The name plate on the product contains the model and sufx codes. Verify that the specication
indicated in the “MODEL AND SUFFIX CODES” and “OPTIONAL SPECIFICATIONS” in Gen-
eral Specications “GS 01W02D01-01EN” is in compliance with the specications written on the
order sheet. If you have any questions, contact our sales ofce or your local distributor.
l Transportation of products contains lithium batteries:
This product contains lithium batteries. Primary lithium batteries are subject to transportation
regulations by the U.S. Department of Transportation, and are also covered by the International
Air Transport Association (IATA), the International Civil Aviation Organization (ICAO), and the Eu-
ropean Ground Transportation of Dangerous Goods (ARD). It is the responsibility of the shipper
to ensure compliance with these or any other local requirements. Consult current regulations and
requirements regarding lithium batteries before shipping.
n Notes on Attached Software
l Before opening the media package, read YFGW410 Software License Agree-
ment. Once the package is opened, it is thought that the contract is agreed.
l Yokogawa assumes no responsibilities for this software except as stated in
the warranty.
l This software is used with this product exclusively. This can be viewed and
operated through the web browser in the computer which connects with this
product.
n Cautions for Safely Applying the Device
l EMC Conformity Standards
EN61326-1 Class A, Table 2, EN55011 Class A, Group 1, EN61000-6-2
This instrument is a Class A product, and it is designed for use in the industrial environment.
Please use this instrument in the industrial environment only.

9
<Read Me First>
IM 01W02D01-11EN
nWiring the Ground
Appropriate grounding is necessary for the stable operation of YFGW410.
The frame ground (FG) terminal (M4 screw) is located on the side of power supply connector on
the top side of the mainbody.
To connect the ground cable to the FG terminal, use a ring tongue terminal for M4 with an
insulation sleeve.
Secure the M4 screws at a tightening torque of 1.2 to 1.5 Nm.
SEE
ALSO
For grounding of YFGW410, see “C4.3 Grounding” of the YFGW410 user’s manual (IM01W02D01-01EN).

10
<Read Me First>
IM 01W02D01-11EN
n Control of Pollution Caused by the Product
lChina RoHS
This is an explanation for the product based on “Control of Pollution caused by Electronic Infor-
mation Products” in the People’s Republic of China.
電子情報製品汚染制御管理弁法（中国版 RoHS）
产品中有害物质或元素的名称及含量
型号 部件名称
有害物质
铅
（Pb）
汞
（Hg）
镉
（Cd）
六价铬
（Cr(VI)）
多溴联苯
（PBB）
多溴二苯醚
（PBDE）
YFGW410
现场无线管理站
壳体 × ○ ○ ○ ○ ○
基板组件 × ○ ○ ○ ○ ○
电缆 × ○ ○ ○ ○ ○
○：表示该部件的所有均质材料中的有害物质的含量均在GB/T26572 标准中所规定的限量以下。
×：表示至少该部件的某些均质材料中的有害物质的含量均在GB/T26572 标准中所规定的限量以上。
环保使用期限：
该标识适用于SJ /T11364 中所述，在中华人民共和国销售的电子电气产品的环保使用期限。
注）该年数为“环保使用期限”，并非产品的质量保证期。
lEU RoHS
This product is in conformity with the following standard:
EN 50581:2012 (Technical documentation for the assessment of electrical and electronic prod-
ucts with respect to the restriction of hazardous substances)