York AFFINITY CZH024 THRU 060 User manual

TECHNICAL GUIDE
AFFINITY
R-410A SPLIT-SYSTEM AIR CONDITIONERS
18 SEER
MODELS: CZH024 THRU 060*(C)
(2 THRU 5 NOMINAL TONS)
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at www.york.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY
Standard 5-year limited parts warranty.
10-year limited compressor warranty.
Premium System Warranty - Limited lifetime compressor
when matched with an approved York Affinity furnace or UPG
air handler and coil.
Extended 10-year limited parts warranty when product is
registered online within 90 days of purchase for replace-
ment or closing for new home construction.
®
561926-YTG-A-0410
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The 18 SEER Series unit is the outdoor part of a versatile cli-
mate system. It is designed with a matching indoor coil compo-
nent from Johnson Controls Unitary Products. Available for
typical applications this climate system is supported with acces-
sories and documents to serve specific functions.
FEATURES
•Superior Coil Protection – A stamped decorative metal coil
guard completely protects coil from debris and other large
damaging material while a polymer mesh further protects the
coil against smaller particles.
•Isolated Compressor Compartment – A molded composite
bulkhead isolates the compressor from the rest of the unit
reducing sound and vibration.
•Protected Compressors – Each compressor is protected
against abnormal pressures by an internal pressure relief
valve and factory installed high and low pressure controls.
Additional protection against moisture and debris is provided
by factory installed liquid line filter driers.
•Environmentally Friendly Refrigerant – Next generation
refrigerant R-410A delivers environmentally friendly perfor-
mance with zero ozone depletion.
•Durable Finish – Automotive quality finish provides the ulti-
mate protection from harmful U.V. rays and rust creep ensur-
ing long-lasting high quality appearance. A powder-paint
topcoat is applied over a baked-on primer, using a galva-
nized, zinc coated steel base material. The result is a finish
that has been proven in testing to provide 33% greater dura-
bility than conventional powder-coat finishes.
•Lower Installed Cost – Designed to provide enhanced
installability by featuring a slide-down control compartment
and angled service valves to reduce overall installation time
and cost.
•Low Operating Sound Levels – A fan design boasting tech-
nology adapted from aeronautic and defense engineering
provides for whisper quiet operation by allowing airflow to
flow smoothly and efficiently across the fan tips.
•Filter-Drier – A factory installed, solid core liquid line filter-
drier filters harmful debris and moisture from the system.
•Easy Service Access – A full end, full service, access panel
with handle makes for easy entry to internal components.
•Composite Base - Strong and durable composite base pan
resists rust and corrosion while it helps reduce vibrations and
noise.
•Quiet drive system - Features combination of swept-wing
fan, composite base pan, isolated compressor compartment
and two-stage compressor to reduce overall sound to a mere
whisper.
•Low RPM fan motor - Helps to reduce airflow noise.
•Agency Listed -U.L. and C.U.L. listed - approved for out-
door application. The unit is certified in accordance with the
Unitary Small Equipment cerification program, which is
based on ARI Standard 210/240.

561926-YTG-A-0410
2Johnson Controls Unitary Products
All dimensions are in inches. They are subject to change without notice.
Certified dimensions will be provided upon request.
Physical and Electrical Data
MODEL CZH02411(C) CZH03611(C) CZH04811(C) CZH06011(C)
Unit Supply Voltage 208-230V, 1 60Hz
Normal Voltage Range 1187 to 252
Minimum Circuit Ampacity 15.6 23.6 29.2 34.8
Max. Overcurrent Device Amps 225 40 50 60
Min. Overcurrent Device Amps 320 25 30 35
Multi-stage Compressor Yes Yes Yes Yes
Compressor Type Scroll Scroll Scroll Scroll
Compressor Amps Rated Load 10.3 16.7 21.2 25.6
Locked Rotor 52 82 96 118
Crankcase Heater No No No No
Fan Motor Amps Rated Load 2.8 2.8 2.8 2.8
Fan Diameter Inches 24 24 24 24
Fan Motor Rated HP 1/3 1/3 1/3 1/3 Nominal RPM 685 685 685 685
Nominal CFM 2900 3200 3100 3150
Coil Face Area Sq. Ft. 23.58 23.58 23.58 23.58 Rows Deep 2 2 2 2
Fins / Inch 16 16 14 14
Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8
Vapor Line Set OD (Field Installed) 3/4 3/4 7/8 7/8
Unit Charge (Lbs. - Oz.) 415 - 1 13 - 7 12 - 9 13 - 5
Charge Per Foot, Oz. 0.62 0.62 0.67 0.67
Operating Weight Lbs. 305 305 310 330
1 Rated in accordance with ARI Standard 110, utilization range “A”.
2 Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3 Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4 The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet,
add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.
VAPOR
LIQUID
2-3/8
3-1/8 6-1/2
C
A
B
Unit
Model Dimensions (Inches)
Refrigerant
Connection
Service Valve Size
A B C Liquid Vapor
24 39-1/2 42 34
3/8” 3/4”
36 39-1/2 42 34
48 39-1/2 42 34 7/8”
60 39-1/2 42 34

561926-YTG-A-0410
Johnson Controls Unitary Products 3
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaporator and 15 feet of interconnecting
line tubing.
2. Verify the TXV and additional charge required for specific evaporator coil in the system using the above table.
3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table.
4. For TXV matches requiring additional charge, the refrigerant needs to be weighed in for specific coil match and lineset length.
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for evaporator +
adder for line set.
System Charge for Various Matched Systems
Outdoor Unit CZH02411(C) CZH03611(C) CZH04811(C) CZH06011(C)
Approved System Thermal Expansion Valve11TVM4F1 1TVM4H1 1TVM4J1 1TVM4K1
Factory Charge, lbs-oz 15 - 1 13 - 7 12 - 9 13 - 5
Indoor Coil2TXV Kit3- Additional Charge, Oz
AHX18 0–––
AHX24 10 – – –
AHX30 12 – – –
AHX36 18 12 – –
AHX42 – 22 – –
AHX48 – 21 9 –
AHX60 – 27 15 14
AV24 2–––
AV36 19 12 – –
AV/SV48 – 21 10 –
AV/SV60 – – 10 7
F*FV060 – – 0 0
F*FP048 – – – –
F*FP060 – – – –
FC/MC/PC30 4–––
FC/MC/PC32 12 – – –
FC/MC/PC35 12 6 – –
FC/MC/PC36 50––
FC/MC/PC37 18 12 – –
FC/MC/PC42 –3––
FC/MC/PC43 18 12 – –
FC/MC/PC48 29 21 10 –
FC/MC/PC60 ––97
FC/MC62 – 27 15 14
HC30 10 – – –
HC36 12 – – –
HC42 – 11 – –
HC60 – – 0 0
HD36 23 – – –
HD48 – 30 20 –
HD60 – – 26 14
UC30 4 – – –
UC36 4 1 – –
UC42 – 3 – –
UC48 22 16 5 –
UC60 – – 10 9
FOOTNOTES:
1 Systems matched with furnace or air handlers not equipped with blower-off delays may require blower Time Delay Kit 2FD06700224.
2 PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.
3 A TXV kit must be used with these coils to obtain system performance.
Note: If a TXV is factory installed on the coil, it must be replaced with the listed TXV.

561926-YTG-A-0410
4Johnson Controls Unitary Products
COOLING CAPACITY - With Air Handler Coils
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL W STAGE RATED
CFM NET MBH SEER EER
1 PH 18 SEER AC WITH MV
CZH02411(C)
MV12B 17 FC/MC/PC35B
1 620 18.2 13.8
17.05 13.80
2 800 23.6 17.2
MV12B 17 FC/MC/PC35C
1 620 18.2 13.8
17.05 13.80
2 800 23.6 17.2
MV12B 17 FC/MC/PC43B
1 620 18.5 14.0
17.20 14.00
2 800 24.0 17.5
MV12B 17 FC/MC/PC43C
1 620 18.5 14.0
17.20 14.00
2 800 24.0 17.5
MV12D 24 FC/MC/PC48D
1 645 18.9 14.3
18.00 14.45
2 835 24.6 17.9
CZH03611(C)
MV12B 17 FC/MC/PC43B
1 775 25.6 18.0
17.70 13.55
2 1200 36.0 25.2
MV16C 21 FC/MC/PC43C
1 775 25.7 18.1
18.00 14.00
2 1200 36.2 25.3
MV12D 24 FC/MC/PC48D
1 735 25.6 18.0
18.40 13.95
2 1135 36.0 25.2
MV16C 21 FC/MC/PC48C
1 775 25.9 18.2
18.40 14.15
2 1200 36.4 25.4
MV12D 24 FC/MC62D
1 735 25.7 18.1
18.50 14.25
2 1135 36.6 25.6
CZH04811(C)
MV16C 21 FC/MC/PC48C
1 1000 34.0 25.1
17.30 12.45
2 1600 46.0 35.1
MV16C 21 FC/MC/PC48D
1 1000 34.0 25.1
17.30 12.45
2 1600 46.0 35.1
MV20D 24 FC/MC/PC48D
1 1020 34.0 25.1
17.00 12.35
2 1600 46.0 35.1
MV20D 24 FC/MC62D
1 1075 33.8 25.0 17.00 12.45
2 1625 46.5 35.8
CZH06011(C) MV20D 24 FC/MC/PC60D
1 1030 40.2 27.3
15.30 11.55
2 1800 55.5 40.5
MV20D 24 FC/MC62D
1 1030 42.1 28.6
16.00 12.00
2 1800 58.0 42.3
1 PH 18 SEER AC WITH AV / SV / F*FV
CZH02411(C) AV*24 17 – 1 540 17.4 12.2 16.50 13.25
2 800 23.8 16.7
AV*36 21 – 1 505 17.6 12.2 17.00 13.75
2 725 24.0 16.5
CZH03611(C) AV*36 21 – 1 765 24.8 17.1 18.00 13.50
2 1190 36.0 25.3
AV/SV*48 24 – 1 815 25.2 17.6 18.00 13.50
2 1220 36.2 25.5
CZH04811(C)
AV/SV*48 24 – 1 1055 33.1 24.4 16.00 11.75
2 1625 45.0 34.0
AV/SV*60 24 – 1 995 32.6 23.7 16.00 11.75
2 1560 45.0 33.6
F4FV060 24 – 1 1200 33.6 24.8 16.85 12.15
2 1600 44.5 34.0
CZH06011(C) AV/SV*60 24 – 1 1095 41.5 27.2 15.00 11.50
2 1730 56.5 38.7
F4FV060 24 – 1 1200 41.8 28.4 15.55 11.60
2 1780 55.5 40.5
For Notes See Page 5.

561926-YTG-A-0410
Johnson Controls Unitary Products 5
— = Not applicable.
1 PH 18 SEER AC WITH AHX
CZH02411(C)
AHX18 17 – 1 535 17.1 12.1 16.25 13.00
2 835 23.4 16.6
AHX24 17 – 1 540 17.4 12.3 16.50 13.25
2 800 23.8 16.8
AHX30 17 – 1 545 17.6 12.6 16.75 13.50
2 820 24.2 17.3
AHX36 21 – 1 505 17.4 12.1 15.75 13.00
2 820 24.0 17.1
CZH03611(C)
AHX36 21 – 1 770 24.8 17.1 18.00 13.50
2 1225 36.0 25.3
AHX42 21 – 1 990 26.2 19.6 18.50 13.75
2 1190 36.6 25.8
AHX48 24 – 1 885 25.2 18.2 18.00 13.50
2 1255 36.2 25.8
AHX60 24 – 1 1005 26.6 20.7 18.25 13.75
2 1300 37.0 26.7
CZH04811(C) AHX48 24 – 1 1070 33.1 24.7 16.00 11.75
2 1660 45.0 34.4
AHX60 24 – 1 1075 32.6 24.0 16.00 11.75
2 1680 45.0 34.3
CZH06011(C) AHX60 24 – 1 1075 41.5 27.2 15.00 11.25
2 1905 56.5 39.9
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210.
Cooling MBH based on 8°F entering air temperature, 50% RH, and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power
input in watt-hours during the same period.
1 MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL W STAGE RATED
CFM NET MBH SEER EER
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils
UNIT MODEL
FURNACE** COIL
MODEL
COOLING
CFM RANGE
(Min.-max.) WSTAGE
RATED
CFM NET MBH SEER1EER
TOTAL SENS.
CZH02411(C) 550 - 650 21,24 FC/MC/PC48 1 600 19.0 14.6 17.95 14.45
650 - 950 2 865 25.8 18.8
CZH03611(C) 800 - 1000 24 FC/MC62 1 805 25.6 18.0 18.30 14.20
1000 - 1400 2 1170 37.6 26.2
CZH04811(C) 1000 - 1400 24 FC/MC62 1 1200 33.8 25.4 14.50 11.50
1400 - 1800 2 1600 45.5 34.2
CZH06011(C) 1150 - 1550 24 FC/MC62 1 1160 42.5 28.0 16.00 12.00
1600 - 2000 2 1855 58.5 40.0
1 Requires a 2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
** Refer to Quick Selection Chart for specific furnace match-up.

561926-YTG-A-0410
6Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces
UNIT
MODEL FURNACE MODEL COIL MODEL1W
COOLING
STAGE RATED
CFM NET MBH SEER EER
TOTAL SENSIBLE
1 PH 18 SEER AC WITH HIGH EFFICIENCY FURNACES2
CZH02411(C)
T*(8,L)X*A12 FC/MC/PC30A 14 1 555 17.7 12.5 16.75 13.50
2 775 23.0 16.1
T*(8,L)X*B12 FC/MC/PC30B 17 1 645 17.8 13.3 17.00 13.50
2 835 23.2 16.6
T*9X*B12 FC/MC/PC30B 17 1 595 17.7 12.9 16.75 13.50
2 775 23.0 16.1
T*(8,L)X*A12 FC/MC/PC32A 14 1 530 17.5 12.3 16.50 13.25
2 800 23.0 16.3
T*(8,L)X*B12 FC/MC/PC35B 17 1 675 17.4 13.4 16.50 13.50
2 850 23.0 16.4
T*(8,L)X*C16 FC/MC/PC35C 21 1 625 18.0 13.4 17.00 14.00
2 865 24.2 17.5
T*(8,L)X*C20 FC/MC/PC35C 21 1 710 18.8 14.9 17.00 14.00
2 885 24.2 17.6
T*9X*B12 FC/MC/PC35B 17 1 620 17.5 12.9 16.50 13.25
2 785 23.2 16.4
T*9X*C16 FC/MC/PC35C 21 1 610 18.0 13.2 16.75 14.00
2 765 24.0 16.7
T*(8,L)X*A12 FC/MC/PC36A 14 1 555 17.8 12.7 16.75 13.50
2 815 23.0 16.4
T*(8,L)X*B12 FC/MC/PC36B 17 1 670 17.5 13.2 16.75 13.75
2 835 23.0 16.6
T*(8,L)X*C16 FC/MC/PC36C 21 1 675 18.4 13.9 17.25 14.00
2 875 24.0 17.6
T*9X*B12 FC/MC/PC36B 17 1 600 17.9 13.0 16.75 13.50
2 775 23.2 16.5
T*9X*C16 FC/MC/PC36C 21 1 665 18.4 13.8 17.25 14.00
2 815 24.0 17.2
T*(8,L)X*A12 FC/MC/PC37A 14 1 640 18.0 13.4 16.75 13.50
2 840 23.6 17.0
T*(8,L)X*B12 FC/MC/PC43B 17 1 700 17.5 13.5 16.75 13.75
2 865 23.4 17.0
T*9X*C16 FC/MC/PC43C 21 1 645 18.4 13.7 17.25 14.00
2 785 24.2 17.1
T*(8,L)X*C16 FC/MC/PC48C 21 1 685 18.8 14.4 17.75 14.25
2 875 24.8 18.1
T*9X*C16 FC/MC/PC48C 21 1 680 18.6 14.3 17.50 14.25
2 815 24.4 17.6
T*(8,L)X*B12 HD36 17 1 655 17.0 12.8 16.00 13.25
2 855 22.6 15.8
T*(8,L)X*A12 UC30A 14 1 555 17.7 12.7 16.75 13.50
2 785 23.2 16.3
T*(8,L)X*B12 UC30B 17 1 645 17.8 13.3 17.25 13.75
2 835 23.2 16.4
T*9X*B12 UC30B 17 1 595 17.8 13.0 17.00 13.50
2 775 23.2 16.2
T*(8,L)X*B12 UC36B 17 1 670 16.6 12.4 16.00 13.25
2 835 22.2 15.8
T*(8,L)X*C16 UC36C 21 1 665 17.6 13.2 16.50 13.50
2 875 23.8 17.1
T*9X*B12 UC36B 17 1 600 17.0 12.5 16.00 13.00
2 775 22.4 15.6
For Notes See Page 14.

561926-YTG-A-0410
Johnson Controls Unitary Products 7
CZH02411(C)
T*9X*C16 UC36C 21 1 665 17.6 13.1 16.50 13.75
2 815 23.4 16.7
T*(8,L)X*C16 UC48C 21 1 675 17.8 13.4 16.75 13.75
2 875 24.0 17.1
T*9X*C16 UC48C 21 1 670 17.7 13.4 16.75 13.75
2 815 23.8 17.0
(Y*(8,L)C/T*8V)*A12 FC/MC/PC30A 14 1 590 18.2 13.4 16.75 13.50
2 805 24.6 17.4
(Y*(8,L)C/T*8V)*B12 FC/MC/PC30B 17 1 565 18.2 13.2 17.00 13.50
2 815 24.6 17.6
(Y*9C/T*9V)*B12 FC/MC/PC30B 17 1 565 17.7 13.1 16.75 13.50
2 790 23.0 16.3
(Y*(8,L)C/T*8V)*A12 FC/MC/PC32A 14 1 550 18.0 13.0 16.50 13.25
2 775 24.4 17.3
(Y*(8,L)C/T*8V)*B12 FC/MC/PC35B 17 1 515 17.8 12.7 16.50 13.50
2 760 24.4 17.3
(Y*9C/T*9V)*B12 FC/MC/PC35B 17 1 550 17.5 12.7 16.50 13.25
2 815 23.2 16.5
(Y*(8,L)C/T*8V)*A12 FC/MC/PC36A 14 1 595 18.4 13.6 17.00 13.50
2 805 24.8 17.5
(Y*(8,L)C/T*8V)*B12 FC/MC/PC36B 17 1 525 18.0 12.8 16.75 13.75
2 765 24.6 17.2
(Y*9C/T*9V)*B12 FC/MC/PC36B 17 1 590 17.9 13.2 16.75 13.50
2 815 23.2 16.6
(Y*(8,L)C/T*8V)*B12 FC/MC/PC43B 17 1 515 18.0 12.8 16.75 13.75
2 760 24.8 17.5
(Y*9C/T*9V)*B12 FC/MC/PC43B 17 1 550 17.8 12.9 17.00 13.75
2 800 23.6 16.7
(Y*(8,L)C/T*8V)*A12 HC30 14 1 550 17.4 12.6 16.25 13.25
2 775 22.8 15.9
(Y*(8,L)C/T*8V)*A12 HD36 14 1 595 17.5 12.6 16.50 13.25
2 805 23.0 15.7
(Y*(8,L)C/T*8V)*B12 HD36 17 1 515 17.0 11.9 16.00 13.25
2 760 22.6 15.5
(Y*9C/T*9V)*B12 HD36 17 1 590 17.5 12.6 16.50 13.50
2 815 23.0 15.7
(Y*(8,L)C/T*8V)*A12 UC30A 14 1 590 17.7 13.2 16.75 13.50
2 805 23.2 16.3
(Y*(8,L)C/T*8V)*B12 UC30B 17 1 565 17.8 13.3 17.25 13.75
2 815 23.2 16.3
(Y*9C/T*9V)*B12 UC30B 17 1 565 17.8 13.2 17.00 13.50
2 790 23.2 16.3
(Y*(8,L)C/T*8V)*A12 UC36A 14 1 595 17.0 12.8 16.00 13.00
2 805 22.4 15.7
(Y*(8,L)C/T*8V)*B12 UC36B 17 1 525 16.6 11.9 16.00 13.25
2 765 22.2 15.5
(Y*9C/T*9V)*B12 UC36B 17 1 590 17.0 12.8 16.00 13.00
2 815 22.4 15.7
For Notes See Page 14.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE MODEL COIL MODEL1W
COOLING
STAGE RATED
CFM NET MBH SEER EER
TOTAL SENSIBLE
1 PH 18 SEER AC WITH HIGH EFFICIENCY FURNACES2

561926-YTG-A-0410
8Johnson Controls Unitary Products
CZH03611(C)
T*(8,L)X*B12 FC/MC/PC35B 17 1 820 24.6 17.1 17.00 12.50
2 1290 35.0 25.0
T*(8,L)X*C16 FC/MC/PC35C 21 1 585 23.0 14.8 16.25 13.25
2 1105 35.0 24.2
T*(8,L)X*C20 FC/MC/PC35C 21 1 750 24.4 16.6 16.75 13.25
2 1225 35.2 24.8
T*9X*B12 FC/MC/PC35B 17 1 760 24.4 16.7 16.75 12.75
2 1265 35.2 24.9
T*9X*C16 FC/MC/PC35C 21 1 675 23.6 15.9 17.00 13.00
2 1270 35.4 25.1
T*9X*C20 FC/MC/PC35C 21 1 790 24.6 17.0 17.00 12.75
2 1195 35.6 24.8
T*(8,L)X*A12 FC/MC/PC36A 14 1 750 24.2 16.5 16.75 12.50
2 1185 34.6 23.9
T*(8,L)X*B12 FC/MC/PC36B 17 1 810 24.6 17.0 17.00 12.75
2 1255 34.8 24.5
T*(8,L)X*C16 FC/MC/PC36C 21 1 635 23.6 15.4 16.75 13.25
2 1100 34.8 23.6
T*(8,L)X*C20 FC/MC/PC36C 21 1 795 24.4 17.0 17.25 13.00
2 1265 35.0 24.7
T*9X*B12 FC/MC/PC36B 17 1 750 24.2 16.6 17.00 12.75
2 1245 34.8 24.2
T*9X*C16 FC/MC/PC36C 21 1 725 24.2 16.4 17.25 12.75
2 1275 34.6 24.6
T*9X*C20 FC/MC/PC36C 21 1 830 24.6 17.2 17.25 12.75
2 1195 35.2 24.3
T*(8,L)X*A12 FC/MC/PC37A 14 1 810 24.2 16.9 16.75 13.00
2 1290 34.2 24.4
T*(8,L)X*B12 FC/MC/PC42B 17 1 840 24.6 17.4 17.25 13.00
2 1160 34.8 24.1
T*(8,L)X*C16 FC/MC/PC42C 21 1 680 23.8 15.8 17.00 13.50
2 1200 35.4 25.0
T*(8,L)X*C20 FC/MC/PC42C 21 1 845 24.6 17.4 17.25 13.25
2 1270 35.0 24.8
T*9X*B12 FC/MC/PC42B 17 1 775 24.4 16.7 17.00 12.50
2 1275 34.8 24.8
T*9X*C16 FC/MC/PC42C 21 1 765 24.4 16.7 17.25 13.00
2 1260 34.8 24.6
T*(8,L)X*B12 FC/MC/PC43B 17 1 835 24.8 17.5 17.25 12.75
2 1300 35.4 25.3
T*(8,L)X*C16 FC/MC/PC43C 21 1 615 23.6 15.3 17.00 13.75
2 1175 35.8 25.1
T*(8,L)X*C20 FC/MC/PC43C 21 1 780 24.8 17.2 17.50 13.50
2 1250 35.8 25.6
T*9X*B12 FC/MC/PC43B 17 1 775 24.8 17.2 17.00 12.75
2 1270 35.4 25.6
T*9X*C16 FC/MC/PC43C 21 1 695 24.4 16.3 17.25 13.00
2 1260 35.6 25.2
T*9X*C20 FC/MC/PC43C 21 1 810 24.8 17.3 17.25 13.25
2 1185 35.8 25.1
T*(8,L)X*C16 FC/MC/PC48C 21 1 645 24.2 15.9 17.25 13.75
2 1185 36.4 25.7
For Notes See Page 14.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE MODEL COIL MODEL1W
COOLING
STAGE RATED
CFM NET MBH SEER EER
TOTAL SENSIBLE
1 PH 18 SEER AC WITH HIGH EFFICIENCY FURNACES2

561926-YTG-A-0410
Johnson Controls Unitary Products 9
CZH03611(C)
T*(8,L)X*C20 FC/MC/PC48C 21 1 810 24.8 17.4 17.50 13.75
2 1270 36.2 26.0
T*9X*C16 FC/MC/PC48C 21 1 720 24.8 16.8 17.75 13.25
2 1280 36.2 26.1
T*9X*C20 FC/MC/PC48C 21 1 830 24.8 17.6 17.50 13.25
2 1205 36.6 25.8
T*9X*D20 FC/MC/PC48D 24 1 870 25.6 18.4 18.00 13.75
2 1240 36.8 26.0
T*9X*D20 FC/MC62D 24 1 830 25.4 18.0 17.75 13.75
2 1225 36.8 26.0
T*9X*D20 HD48 24 1 830 25.0 17.7 17.25 13.50
2 1260 36.6 26.2
T*(8,L)X*A12 UC36A 14 1 750 23.8 16.1 16.50 12.25
2 1225 34.0 23.7
T*(8,L)X*B12 UC36B 17 1 810 24.0 16.6 16.75 12.50
2 1255 34.2 23.8
T*(8,L)X*C16 UC36C 21 1 635 23.0 14.9 16.50 13.00
2 1100 34.4 23.4
T*(8,L)X*C20 UC36C 21 1 795 24.0 16.5 16.75 13.00
2 1265 34.4 24.2
T*9X*C20 UC36C 21 1 830 24.2 16.9 16.75 12.75
2 1195 34.8 24.2
T*(8,L)X*B12 UC42B 17 1 840 24.4 17.0 17.00 13.00
2 1160 34.6 23.9
T*(8,L)X*C16 UC42C 21 1 680 23.4 15.5 16.75 13.25
2 1200 35.0 24.5
T*(8,L)X*C20 UC42C 21 1 845 24.4 17.0 17.25 13.25
2 1270 35.0 24.7
T*9X*B12 UC42B 17 1 775 24.2 16.4 16.75 12.50
2 1275 34.6 24.4
T*9X*C16 UC42C 21 1 765 24.2 16.4 17.00 13.00
2 1260 34.8 24.5
T*(8,L)X*C16 UC48C 21 1 645 23.4 15.4 16.75 13.50
2 1185 35.6 25.3
T*(8,L)X*C20 UC48C 21 1 810 24.4 17.2 17.25 13.50
2 1270 35.4 25.4
T*9X*C16 UC48C 21 1 720 24.0 16.4 17.25 13.00
2 1280 35.6 25.7
T*9X*C20 UC48C 21 1 830 24.6 17.5 17.25 13.00
2 1205 35.8 25.4
T*9X*D20 UC48D 24 1 870 24.8 18.0 17.50 13.25
2 1240 36.0 25.8
(Y*(8,L)C/T*8V)*B12 FC/MC/PC35B 17 1 775 25.4 17.9 17.00 12.50
2 1150 37.0 26.2
(Y*(8,L)C/T*8V)*C16 FC/MC/PC35C 21 1 770 25.4 18.0 17.25 13.25
2 1210 37.4 27.0
(Y*(8,L)C/T*8V)*C20 FC/MC/PC35C 21 1 1005 26.8 20.4 17.25 13.25
2 1170 37.4 26.6
(Y*9C/T*9V)*B12 FC/MC/PC35B 17 1 810 25.0 17.4 16.75 12.75
2 1190 35.2 24.5
(Y*9C/T*9V)*C16 FC/MC/PC35C 21 1 790 25.0 17.5 17.25 13.00
2 1215 35.4 24.7
For Notes See Page 14.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE MODEL COIL MODEL1W
COOLING
STAGE RATED
CFM NET MBH SEER EER
TOTAL SENSIBLE
1 PH 18 SEER AC WITH HIGH EFFICIENCY FURNACES2

561926-YTG-A-0410
10 Johnson Controls Unitary Products
CZH03611(C)
(Y*9C/T*9V)*C20 FC/MC/PC35C 21 1 760 24.6 16.8 17.00 12.75
2 1330 35.6 25.3
(Y*(8,L)C/T*8V)*A12 FC/MC/PC36A 14 1 815 25.6 18.3 16.75 12.50
2 1190 36.8 25.8
(Y*(8,L)C/T*8V)*B12 FC/MC/PC36B 17 1 745 25.4 17.7 17.00 12.75
2 1220 37.0 26.2
(Y*(8,L)C/T*8V)*C16 FC/MC/PC36C 21 1 805 25.8 18.3 17.50 13.00
2 1235 37.0 26.8
(Y*(8,L)C/T*8V)*C20 FC/MC/PC36C 21 1 800 25.8 18.3 17.30 13.25
2 1240 37.2 26.8
(Y*9C/T*9V)*B12 FC/MC/PC36B 17 1 800 25.0 17.3 17.00 12.75
2 1165 34.8 23.9
(Y*9C/T*9V)*C16 FC/MC/PC36C 21 1 915 25.4 18.2 17.25 13.00
2 1185 34.6 24.1
(Y*9C/T*9V)*C20 FC/MC/PC36C 21 1 760 24.6 16.8 17.25 12.75
2 1320 35.2 25.1
(Y*(8,L)C/T*8V)*A12 FC/MC/PC37A 14 1 730 25.6 17.7 16.75 13.00
2 1150 37.4 26.6
(Y*(8,L)C/T*8V)*B12 FC/MC/PC42B 17 1 760 25.6 18.0 17.25 13.00
2 1175 37.2 26.2
(Y*(8,L)C/T*8V)*C16 FC/MC/PC42C 21 1 825 25.0 17.6 17.50 13.50
2 1205 35.4 24.7
(Y*(8,L)C/T*8V)*C20 FC/MC/PC42C 21 1 735 25.2 17.5 17.50 13.50
2 1170 37.2 26.6
(Y*9C/T*9V)*B12 FC/MC/PC42B 17 1 800 25.0 17.5 17.00 12.50
2 1195 34.8 24.3
(Y*9C/T*9V)*C16 FC/MC/PC42C 21 1 780 24.6 16.9 17.25 13.25
2 1205 34.8 24.3
(Y*9C/T*9V)*C20 FC/MC/PC42C 21 1 770 24.8 17.0 17.25 13.00
2 1325 35.4 25.5
(Y*(8,L)C/T*8V)*B12 FC/MC/PC43B 17 1 860 26.4 19.2 17.25 12.75
2 1270 37.8 27.8
(Y*(8,L)C/T*8V)*C16 FC/MC/PC43C 21 1 770 26.0 18.3 17.50 13.50
2 1190 38.0 27.4
(Y*(8,L)C/T*8V)*C20 FC/MC/PC43C 21 1 745 25.8 18.1 17.50 13.50
2 1190 38.5 27.4
(Y*9C/T*9V)*B12 FC/MC/PC43B 17 1 815 25.0 17.5 17.00 12.75
2 1200 35.4 24.9
(Y*9C/T*9V)*C16 FC/MC/PC43C 21 1 815 25.2 17.5 17.25 13.00
2 1240 35.6 25.1
(Y*9C/T*9V)*C20 FC/MC/PC43C 21 1 780 24.8 16.9 17.25 13.25
2 1200 35.8 25.1
(Y*(8,L)C/T*8V)*C16 FC/MC/PC48C 21 1 810 26.4 19.0 17.75 13.50
2 1210 38.5 28.0
(Y*(8,L)C/T*8V)*C20 FC/MC/PC48C 21 1 720 25.8 18.0 17.50 13.75
2 1155 38.5 27.4
(Y*9C/T*9V)*C16 FC/MC/PC48C 21 1 780 25.6 17.9 17.75 13.50
2 1195 36.2 25.5
(Y*9C/T*9V)*C20 FC/MC/PC48C 21 1 745 24.8 17.1 17.50 13.25
2 1330 36.6 26.5
(Y*(8,L)C/T*8V)*C16 HC42 21 1 800 25.0 17.6 17.50 13.50
2 1205 35.8 25.1
For Notes See Page 14.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE MODEL COIL MODEL1W
COOLING
STAGE RATED
CFM NET MBH SEER EER
TOTAL SENSIBLE
1 PH 18 SEER AC WITH HIGH EFFICIENCY FURNACES2

561926-YTG-A-0410
Johnson Controls Unitary Products 11
CZH03611(C)
(Y*(8,L)C/T*8V)*C20 HC42 21 1 745 24.8 17.0 17.50 13.50
2 1190 35.8 25.1
(Y*9C/T*9V)*C16 HC42 21 1 815 25.0 17.6 17.25 13.00
2 1240 35.6 24.9
(Y*9C/T*9V)*C20 HC42 21 1 780 25.0 17.6 17.50 13.25
2 1200 35.8 25.1
(Y*(8,L)C/T*8V)*B12 HD48 17 1 750 24.8 17.0 17.25 13.25
2 1210 35.8 25.1
(Y*9C/T*9V)*B12 HD48 17 1 710 24.6 16.5 17.00 13.00
2 1150 35.4 24.3
(Y*(8,L)C/T*8V)*C16 HD48 21 1 810 25.4 17.7 17.75 13.75
2 1210 36.0 25.3
(Y*(8,L)C/T*8V)*C20 HD48 21 1 720 24.8 16.7 17.50 13.75
2 1155 35.8 24.9
(Y*9C/T*9V)*C16 HD48 21 1 780 25.4 17.6 17.50 13.50
2 1195 36.0 25.1
(Y*9C/T*9V)*C20 HD48 21 1 745 24.8 16.9 17.25 13.25
2 1330 36.2 26.1
(Y*(8,L)C/T*8V)*A12 UC36A 14 1 815 24.4 16.9 16.50 12.25
2 1190 34.0 23.3
(Y*(8,L)C/T*8V)*B12 UC36B 17 1 745 24.0 16.3 16.75 12.50
2 1220 34.2 23.7
(Y*(8,L)C/T*8V)*C16 UC36C 21 1 805 24.6 17.0 17.25 13.00
2 1235 34.4 23.5
(Y*(8,L)C/T*8V)*C20 UC36C 21 1 800 24.6 17.1 17.25 13.00
2 1240 34.4 23.5
(Y*9C/T*9V)*B12 UC36B 17 1 800 24.4 17.0 16.75 12.75
2 1165 34.2 23.5
(Y*9C/T*9V)*C16 UC36C 21 1 915 25.0 17.8 17.00 13.00
2 1185 34.4 23.7
(Y*9C/T*9V)*C20 UC36C 21 1 760 24.2 16.5 16.75 12.75
2 1300 34.8 24.9
(Y*(8,L)C/T*8V)*B12 UC42B 17 1 760 24.4 16.8 17.00 13.00
2 1175 34.6 23.9
(Y*(8,L)C/T*8V)*C16 UC42C 21 1 825 24.8 17.4 17.25 13.50
2 1205 35.0 24.5
(Y*(8,L)C/T*8V)*C20 UC42C 21 1 735 24.4 16.8 17.25 13.50
2 1170 35.0 24.1
(Y*9C/T*9V)*B12 UC42B 17 1 800 24.8 17.3 16.75 12.50
2 1195 34.6 24.1
(Y*9C/T*9V)*C16 UC42C 21 1 780 24.4 16.7 17.00 13.00
2 1205 34.8 23.9
(Y*9C/T*9V)*C20 UC42C 21 1 770 24.4 16.9 17.00 13.00
2 1325 35.4 25.1
(Y*(8,L)C/T*8V)*C16 UC48C 21 1 810 25.0 17.7 17.50 13.50
2 1210 35.6 25.3
(Y*(8,L)C/T*8V)*C20 UC48C 21 1 720 24.4 16.7 17.25 13.50
2 1155 35.4 24.7
(Y*9C/T*9V)*C16 UC48C 21 1 780 25.0 17.7 17.50 13.25
2 1195 35.6 25.1
(Y*9C/T*9V)*C20 UC48C 21 1 755 24.6 17.1 17.25 13.00
2 1330 35.8 25.9
For Notes See Page 14.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE MODEL COIL MODEL1W
COOLING
STAGE RATED
CFM NET MBH SEER EER
TOTAL SENSIBLE
1 PH 18 SEER AC WITH HIGH EFFICIENCY FURNACES2

561926-YTG-A-0410
12 Johnson Controls Unitary Products
CZH04811(C)
T*(8,L)X*C16 FC/MC/PC48C 21 1 1115 33.4 25.0 16.00 11.50
2 1600 45.5 34.4
T*(8,L)X*C20 FC/MC/PC48C 21 1 855 31.8 22.5 15.50 11.75
2 1660 45.5 34.8
T*9X*C20 FC/MC/PC48C 21 1 1215 33.4 25.4 16.00 11.75
2 1615 45.5 34.2
T*9X*D20 FC/MC/PC48D 24 1 1250 33.0 25.4 16.00 11.50
2 1635 45.0 34.0
T*(8,L)X*C16 FC/PC60C 21 1 1120 32.6 24.5 15.75 11.50
2 1605 44.5 33.3
T*(8,L)X*C20 FC/PC60C 21 1 860 31.4 22.3 15.50 11.75
2 1595 45.0 33.6
T*(8,L)X*C20 FC/MC/PC60D 21 1 860 31.4 22.3 15.50 11.75
2 1595 45.0 33.6
T*9X*C20 FC/PC60C 21 1 1215 31.4 25.7 14.50 11.00
2 1625 43.5 34.2
T*9X*D20 FC/MC/PC60D 24 1 1300 32.4 25.1 16.00 11.75
2 1490 44.5 32.9
T*(8,L)X*C16 FC/MC62D 21 1 1115 33.8 25.1 16.25 11.75
2 1610 45.5 34.4
T*(8,L)X*C20 FC/MC62D 21 1 835 31.6 22.3 15.75 12.00
2 1665 46.0 35.0
T*9X*C20 FC/MC62D 21 1 1220 34.2 26.1 16.00 11.75
2 1595 45.5 34.4
T*9X*D20 FC/MC62D 24 1 1240 33.0 25.2 16.25 11.50
2 1610 45.0 34.0
T*(8,L)X*C16 HD48 21 1 1115 32.8 24.7 15.75 11.50
2 1610 45.5 34.4
T*9X*C20 HD48 21 1 1220 33.0 25.4 15.50 11.75
2 1625 45.0 34.4
T*(8,L)X*C16 UC48C 21 1 1115 30.6 22.7 14.50 11.00
2 1600 42.5 31.4
T*9X*C20 UC48C 21 1 1180 31.2 23.3 14.25 11.00
2 1605 43.0 32.0
T*9X*D20 UC48D 24 1 1185 29.8 22.3 14.75 11.00
2 1605 42.0 31.5
T*(8,L)X*C16 UC60C 21 1 1120 30.0 22.2 14.75 11.00
2 1605 42.0 31.3
T*(8,L)X*C20 UC60C 21 1 860 29.2 20.5 14.25 11.50
2 1540 43.0 32.0
T*(8,L)X*C20 UC60D 21 1 860 29.2 20.5 14.25 11.50
2 1540 43.0 32.0
T*9X*D20 UC60D 24 1 1215 30.0 22.6 14.75 11.00
2 1490 42.0 31.1
(Y*(8,L)C/T*8V)*C16 FC/MC/PC48C 21 1 1035 34.4 25.8 16.50 11.75
2 1615 47.0 37.2
(Y*(8,L)C/T*8V)*C20 FC/MC/PC48C 21 1 1080 33.4 24.4 16.25 11.75
2 1640 45.5 34.4
(Y*9C/T*9V)*C16 FC/MC/PC48C 21 1 1050 33.4 24.6 16.25 11.75
2 1590 45.5 34.1
(Y*9C/T*9V)*C20 FC/MC/PC48C 21 1 1055 33.4 24.6 16.50 11.75
2 1655 45.5 34.1
(Y*9C/T*9V)*D20 FC/MC/PC48D 24 1 1060 33.0 24.2 16.25 11.50
2 1645 45.0 34.0
For Notes See Page 14.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE MODEL COIL MODEL1W
COOLING
STAGE RATED
CFM NET MBH SEER EER
TOTAL SENSIBLE
1 PH 18 SEER AC WITH HIGH EFFICIENCY FURNACES2

561926-YTG-A-0410
Johnson Controls Unitary Products 13
CZH04811(C)
(Y*(8,L)C/T*8V)*C16 FC/PC60C 21 1 1025 33.8 25.2 16.25 11.75
2 1600 46.5 36.2
(Y*(8,L)C/T*8V)*C20 FC/PC60C 21 1 1060 34.0 25.8 16.25 12.00
2 1620 46.5 36.6
(Y*9C/T*9V)*C16 FC/PC60C 21 1 1050 32.4 23.8 16.00 11.50
2 1590 44.5 33.6
(Y*9C/T*9V)*C20 FC/PC60C 21 1 1055 32.6 23.8 16.00 11.50
2 1655 44.5 33.6
(Y*9C/T*9V)*D20 FC/MC/PC60D 24 1 1070 32.4 23.8 16.00 11.75
2 1615 44.5 33.8
(Y*9C/T*9V)*D20 FC/MC62D 24 1 1085 33.0 24.4 16.25 11.75
2 1630 45.0 34.0
(Y*9C/T*9V)*D20 HC60 24 1 1070 32.0 23.6 15.75 11.50
2 1615 44.0 33.6
(Y*(8,L)C/T*8V)*C16 HD48 21 1 1035 32.8 24.0 16.25 11.75
2 1615 45.5 33.9
(Y*(8,L)C/T*8V)*C20 HD48 21 1 1080 32.8 24.0 16.00 11.75
2 1640 45.5 33.7
(Y*9C/T*9V)*C16 HD48 21 1 1050 33.0 24.0 16.25 11.75
2 1590 45.0 33.5
(Y*9C/T*9V)*C20 HD48 21 1 1055 33.0 24.0 16.25 11.75
2 1655 45.0 33.5
(Y*9C/T*9V)*D20 HD48 24 1 1060 32.8 24.0 16.25 11.75
2 1645 45.5 33.7
(Y*(8,L)C/T*8V)*C16 HD60 21 1 1035 33.6 24.6 16.75 12.00
2 1625 45.5 34.6
(Y*(8,L)C/T*8V)*C20 HD60 21 1 1015 33.6 24.6 16.75 12.00
2 1605 45.5 34.8
(Y*9C/T*9V)*C16 HD60 21 1 1050 33.4 24.6 16.25 11.75
2 1590 45.5 34.6
(Y*9C/T*9V)*C20 HD60 21 1 1055 33.6 24.6 16.50 11.75
2 1655 45.5 34.6
(Y*9C/T*9V)*D20 HD60 24 1 1070 33.6 24.6 16.50 11.75
2 1615 45.5 34.6
(Y*(8,L)C/T*8V)*C16 UC48C 21 1 1035 31.8 23.4 15.75 11.50
2 1615 44.0 33.4
(Y*(8,L)C/T*8V)*C20 UC48C 21 1 1080 31.8 23.4 15.50 11.50
2 1640 44.0 33.4
(Y*9C/T*9V)*C16 UC48C 21 1 1050 31.8 23.8 15.50 11.25
2 1590 43.5 33.0
(Y*9C/T*9V)*C20 UC48C 21 1 1055 31.8 23.8 15.75 11.25
2 1630 43.5 33.0
(Y*9C/T*9V)*D20 UC48D 24 1 1060 29.8 22.0 14.75 11.00
2 1570 42.0 31.1
(Y*(8,L)C/T*8V)*C16 UC60C 21 1 1035 30.0 21.4 15.00 11.25
2 1570 42.0 31.1
(Y*(8,L)C/T*8V)*C20 UC60C 21 1 1015 30.0 21.4 15.00 11.50
2 1590 42.5 31.3
(Y*9C/T*9V)*C16 UC60C 21 1 1050 30.0 21.2 14.75 11.00
2 1570 42.0 31.1
(Y*9C/T*9V)*C20 UC60C 21 1 1055 30.0 21.4 14.75 11.00
2 1570 42.0 31.1
(Y*9C/T*9V)*D20 UC60D 24 1 1070 30.0 21.2 14.75 11.00
2 1570 42.0 31.1
For Notes See Page 14.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE MODEL COIL MODEL1W
COOLING
STAGE RATED
CFM NET MBH SEER EER
TOTAL SENSIBLE
1 PH 18 SEER AC WITH HIGH EFFICIENCY FURNACES2

561926-YTG-A-0410
14 Johnson Controls Unitary Products
CZH06011(C)
T*(8,L)X*C16 FC/PC60C 21 1 1120 41.0 27.1 15.00 11.50
2 1605 55.5 37.3
T*(8,L)X*C20 FC/PC60C 21 1 860 39.0 24.5 15.00 11.75
2 1690 56.5 37.3
T*(8,L)X*C20 FC/MC/PC60D 21 1 860 39.0 24.5 15.00 11.75
2 1690 56.5 37.3
T*9X*C20 FC/PC60C 21 1 1215 40.0 27.5 14.50 11.00
2 1625 54.5 37.1
T*9X*D20 FC/MC/PC60D 24 1 1320 42.0 29.1 15.50 11.75
2 1730 56.5 38.7
T*9X*C20 FC/MC/PC60D 21 1 1295 42.0 28.7 15.50 11.75
2 1645 56.0 37.7
T*(8,L)X*C20 FC/MC62D 21 1 835 38.5 24.3 14.75 11.75
2 1665 57.0 39.2
T*9X*C20 FC/MC62D 21 1 1220 42.0 28.5 15.25 11.75
2 1595 56.5 38.2
T*9X*D20 FC/MC62D 24 1 1240 40.5 27.3 15.00 11.25
2 1645 55.0 37.6
T*9X*D20 HD60 24 1 1240 40.5 27.2 15.25 11.00
2 1645 54.5 36.3
T*(8,L)X*C16 UC60C 21 1 1120 39.5 26.3 14.75 11.25
2 1605 54.5 36.5
T*(8,L)X*C20 UC60C 21 1 860 38.0 23.5 14.25 11.50
2 1690 55.5 36.5
T*(8,L)X*C20 UC60D 21 1 860 38.0 23.5 14.50 11.50
2 1690 55.5 36.5
T*9X*D20 UC60D 24 1 1320 38.5 26.2 14.50 10.75
2 1730 53.5 36.8
T*9X*C20 UC60C 21 1 1295 41.0 27.7 14.75 11.50
2 1645 55.0 37.1
T*9X*C20 UC60D 21 1 1295 41.0 27.7 15.00 11.50
2 1645 55.0 37.1
(Y*(8,L)C/T*8V)*C20 FC/PC60C 21 1 1060 40.5 25.8 15.20 11.25
2 1620 56.5 36.8
(Y*9C/T*9V)*C20 FC/PC60C 21 1 1055 40.0 25.8 15.00 11.00
2 1655 54.5 35.9
(Y*9C/T*9V)*D20 FC/MC62D 24 1 1085 40.5 26.3 15.00 11.25
2 1630 55.0 36.3
(Y*9C/T*9V)*D20 HC60 24 1 1070 39.0 25.4 14.50 10.75
2 1615 53.5 34.9
(Y*(8,L)C/T*8V)*C20 HD60 21 1 1015 40.5 25.8 15.25 11.50
2 1605 55.5 36.1
(Y*9C/T*9V)*C20 HD60 21 1 1055 40.5 26.3 15.25 11.00
2 1655 55.5 36.3
(Y*9C/T*9V)*D20 HD60 24 1 1070 40.5 26.5 15.25 11.00
2 1615 54.5 35.5
(Y*(8,L)C/T*8V)*C20 UC60C 21 1 1015 38.5 24.6 14.50 11.00
2 1605 53.5 34.6
(Y*9C/T*9V)*C20 UC60C 21 1 1055 38.5 24.6 14.25 10.75
2 1655 53.0 34.4
(Y*9C/T*9V)*D20 UC60D 24 1 1070 38.5 25.0 14.50 10.75
2 1615 53.5 34.6
1 MC coils available with a factory installed horizontal drain pan.
2 Variable speed furnaces have B.O.D (Blower on Delay) standard.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE MODEL COIL MODEL1W
COOLING
STAGE RATED
CFM NET MBH SEER EER
TOTAL SENSIBLE
1 PH 18 SEER AC WITH HIGH EFFICIENCY FURNACES2

561926-YTG-A-0410
Johnson Controls Unitary Products 15
ACCESSORIES*
Hard Start Kit (024-31994-000, 024-31995-000) - Provides
increased starting torque for areas with low voltage.
TXV Kits - 1TVM9 series thermal expansion valves precisely
meter refrigerant for optimum performance
Dehumidistat (2HU16700124) - Provides increased dehumidi-
fication when matched with variable speed furnace or air han-
dler.
Thermostats - Compatible thermostat controls are available
through accessory sourcing. For optimum performance and
installation, refer to the UPGNET “Low Voltage Wiring Diagram”
document to select and apply controls.
SOUND POWER RATINGS*
* Rated in accordance with ARI 270-95 Standards.
UNIT MODEL (dBA)
024 71
036 73
048 72
060 74

561926-YTG-A-0410
16 Johnson Controls Unitary Products
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
NOTE: KW RATING IS FOR OUTDOOR AND INDOOR UNITS.
LOW CFM
Continued on next page.
COOLING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
OUTDOOR UNIT MODEL NO. CZH02411(C)
INDOOR COIL MODEL NO. FC48D + MV12D
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 550 600 650
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65 T.C. 18.6 19.9 18.9 21.7 23.9 19.0 19.9 19.1 21.8 24.4 19.4 20.0 19.3 22.0 24.9 S.C. 18.6 17.5 14.9 14.8 11.7 19.2 18.5 15.6 15.5 12.1 19.7 19.4 16.2 16.2 12.5
K.W. 0.76 0.75 0.76 0.74 0.74 0.75 0.75 0.75 0.73 0.74 0.75 0.75 0.75 0.73 0.74
75 T.C. 17.8 18.8 18.0 20.6 22.8 18.3 18.9 18.3 20.9 23.2 18.7 19.1 18.5 21.1 23.6 S.C. 17.9 17.1 14.5 14.4 11.3 18.4 17.9 15.1 15.1 11.8 18.9 18.6 15.8 15.9 12.2
K.W. 0.93 0.92 0.93 0.91 0.90 0.92 0.92 0.92 0.90 0.90 0.91 0.91 0.92 0.90 0.90
85 T.C. 17.1 17.6 17.1 19.5 21.6 17.5 17.9 17.4 19.9 22.0 17.9 18.2 17.7 20.2 22.3 S.C. 17.2 16.8 14.0 14.0 10.9 17.7 17.3 14.7 14.8 11.4 18.1 17.9 15.4 15.5 11.9
K.W. 1.09 1.09 1.09 1.08 1.06 1.08 1.08 1.09 1.07 1.06 1.07 1.08 1.08 1.06 1.05
95 T.C. 16.4 16.5 16.2 18.5 20.5 16.8 16.9 16.6 18.9 20.8 17.1 17.2 16.9 19.4 21.0 S.C. 16.5 16.4 13.6 13.7 10.5 17.0 16.8 14.3 14.4 11.1 17.4 17.2 15.0 15.1 11.7
K.W. 1.26 1.26 1.26 1.24 1.22 1.24 1.25 1.25 1.24 1.22 1.24 1.24 1.25 1.23 1.21
105 T.C. 15.3 15.4 14.9 17.0 19.0 15.7 15.8 15.2 17.3 19.1 16.0 16.2 15.5 17.7 19.3 S.C. 15.4 15.2 13.0 13.2 10.1 15.8 15.6 13.6 13.9 10.5 16.2 16.0 14.3 14.5 11.0
K.W. 1.48 1.49 1.49 1.47 1.45 1.47 1.48 1.48 1.47 1.45 1.46 1.47 1.48 1.46 1.45
115 T.C. 14.2 14.3 13.6 15.5 17.5 14.6 14.7 13.9 15.8 17.6 15.0 15.1 14.1 16.1 17.7 S.C. 14.4 14.1 12.4 12.8 9.6 14.7 14.5 13.0 13.4 10.0 15.1 14.9 13.5 13.9 10.4
K.W. 1.70 1.71 1.71 1.70 1.68 1.69 1.70 1.70 1.69 1.67 1.68 1.69 1.70 1.68 1.67
125 T.C. 13.1 13.2 12.3 14.0 15.9 13.5 13.6 12.5 14.3 16.0 13.9 14.0 12.7 14.5 16.1 S.C. 13.3 13.0 11.8 12.3 9.2 13.6 13.4 12.3 12.9 9.5 14.0 13.8 12.8 13.4 9.7
K.W. 1.92 1.93 1.93 1.92 1.91 1.91 1.92 1.93 1.91 1.90 1.91 1.91 1.92 1.91 1.90
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
AV*24 – 0.92 0.85 1.01
AV*36 – 0.93 0.85 1.00
AHX18 – 0.90 0.84 1.01
AHX24 – 0.92 0.86 1.01
AHX30 – 0.93 0.88 1.02
AHX36 – 0.92 0.84 1.06
MV12B FC/MC/PC35B 0.96 0.97 1.01
MV12B FC/MC/PC35C 0.96 0.97 1.01
MV12B FC/MC/PC35B 0.98 0.98 1.02
MV12B FC/MC/PC35C 0.98 0.98 1.02
MV12D FC/MC/PC48D 1.00 1.00 1.00

561926-YTG-A-0410
Johnson Controls Unitary Products 17
Furnaces Coil T.C. S.C. KW
T*(8,L)X*A12 FC/MC/PC30A 0.94 0.87 1.01
T*(8,L)X*B12 FC/MC/PC30B 0.94 0.92 0.99
T*9X*B12 FC/MC/PC30B 0.94 0.90 1.01
T*(8,L)X*A12 FC/MC/PC32A 0.93 0.86 1.01
T*(8,L)X*B12 FC/MC/PC35B 0.92 0.93 1.01
T*(8,L)X*C16 FC/MC/PC35C 0.95 0.93 1.02
T*(8,L)X*C20 FC/MC/PC35C 0.99 1.03 1.05
T*9X*B12 FC/MC/PC35B 0.93 0.90 0.99
T*9X*C16 FC/MC/PC35C 0.95 0.92 1.02
T*(8,L)X*A12 FC/MC/PC36A 0.94 0.88 1.01
T*(8,L)X*B12 FC/MC/PC36B 0.93 0.92 0.99
T*(8,L)X*C16 FC/MC/PC36C 0.97 0.97 1.01
T*9X*B12 FC/MC/PC36B 0.95 0.91 1.02
T*9X*C16 FC/MC/PC36C 0.97 0.96 1.01
T*(8,L)X*A12 FC/MC/PC37A 0.95 0.93 1.02
T*(8,L)X*B12 FC/MC/PC43B 0.93 0.94 0.99
T*9X*C16 FC/MC/PC43C 0.97 0.95 1.03
T*(8,L)X*C16 FC/MC/PC48C 0.99 1.00 1.01
T*9X*C16 FC/MC/PC48C 0.98 1.00 1.02
T*(8,L)X*B12 HD36 0.90 0.89 1.00
T*(8,L)X*A12 UC30A 0.94 0.88 1.01
T*(8,L)X*B12 UC30B 0.94 0.93 0.99
T*9X*B12 UC30B 0.94 0.91 1.01
T*(8,L)X*B12 UC36B 0.88 0.86 1.00
T*(8,L)X*C16 UC36C 0.93 0.92 1.02
T*9X*B12 UC36B 0.90 0.87 1.00
T*9X*C16 UC36C 0.93 0.91 1.02
T*(8,L)X*C16 UC48C 0.94 0.93 1.03
T*9X*C16 UC48C 0.94 0.93 1.02
(Y*(8,L)C/T*8V)*A12 FC/MC/PC30A 0.95 0.91 1.01
(Y*(8,L)C/T*8V)*B12 FC/MC/PC30B 0.96 0.92 1.00
(Y*9C/T*9V)B12 FC/MC/PC30B 0.95 0.91 1.01
(Y*(8,L)C/T*8V)*A12 FC/MC/PC32A 0.94 0.89 1.01
(Y*(8,L)C/T*8V)*B12 FC/MC/PC35B 0.93 0.86 1.00
(Y*9C/T*9V)*B12 FC/MC/PC35B 0.94 0.89 1.00
(Y*(8,L)C/T*8V)*A12 FC/MC/PC36A 0.96 0.92 1.00
(Y*(8,L)C/T*8V)*B12 FC/MC/PC36B 0.94 0.88 0.99
(Y*9C/T*9V)*B12 FC/MC/PC36B 0.96 0.92 1.01
(Y*(8,L)C/T*8V)*A12 FC/MC/PC37A 0.97 0.93 1.02
(Y*(8,L)C/T*8V)*B12 FC/MC/PC43B 0.94 0.88 0.99
(Y*9C/T*9V)*B12 FC/MC/PC43B 0.96 0.90 1.00
(Y*(8,L)C/T*8V)*A12 HC30 0.93 0.88 1.01
(Y*(8,L)C/T*8V)*A12 HD36 0.94 0.88 1.01
(Y*(8,L)C/T*8V)*B12 HD36 0.91 0.83 1.00
(Y*9C/T*9V)*B12 HD36 0.94 0.88 1.01
(Y*(8,L)C/T*8V)*A12 UC30A 0.95 0.92 1.01
(Y*(8,L)C/T*8V)*B12 UC30B 0.96 0.92 1.00
(Y*9C/T*9V)*B12 UC30B 0.95 0.92 1.01
(Y*(8,L)C/T*8V)*A12 UC36A 0.91 0.89 1.01
(Y*(8,L)C/T*8V)*B12 UC36B 0.89 0.83 1.00
(Y*9C/T*9V)*B12 UC36B 0.91 0.89 1.01
Furnaces Coil T.C. S.C. KW

561926-YTG-A-0410
18 Johnson Controls Unitary Products
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
NOTE: KW RATING IS FOR OUTDOOR AND INDOOR UNITS.
HIGH CFM
Continued on next page.
COOLING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION
OUTDOOR UNIT MODEL NO. CZH02411(C)
INDOOR COIL MODEL NO. FC48D + MV12D
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 700 800 900
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65 T.C. 23.1 25.7 25.0 28.6 30.7 24.3 26.0 26.1 28.8 31.1 25.5 26.3 27.1 28.9 31.6 S.C. 22.6 21.4 17.9 18.3 14.5 23.8 23.1 19.5 19.1 15.3 25.0 24.8 21.0 20.0 16.1
K.W. 1.12 1.14 1.14 1.16 1.17 1.13 1.14 1.14 1.16 1.18 1.15 1.15 1.15 1.17 1.19
75 T.C. 22.5 24.3 23.9 27.1 29.2 23.5 24.7 24.7 27.4 29.7 24.5 25.1 25.5 27.6 30.1 S.C. 21.9 20.9 17.5 17.8 14.0 23.0 22.4 18.9 18.7 14.8 24.0 23.8 20.3 19.7 15.5
K.W. 1.31 1.32 1.32 1.34 1.35 1.31 1.32 1.32 1.34 1.36 1.33 1.33 1.33 1.35 1.37
85 T.C. 21.8 22.9 22.8 25.6 27.7 22.6 23.4 23.4 26.0 28.2 23.4 23.8 23.9 26.4 28.7 S.C. 21.3 20.4 17.2 17.3 13.6 22.1 21.6 18.4 18.4 14.3 22.9 22.7 19.6 19.4 15.0
K.W. 1.49 1.50 1.50 1.52 1.53 1.49 1.50 1.50 1.52 1.54 1.51 1.51 1.51 1.54 1.55
95 T.C. 21.2 21.5 21.8 24.0 26.2 21.8 22.1 22.1 24.6 26.7 22.4 22.5 22.3 25.2 27.2 S.C. 20.6 20.0 16.8 16.8 13.1 21.3 20.9 17.9 18.0 13.7 21.9 21.7 18.9 19.1 14.4
K.W. 1.67 1.68 1.67 1.70 1.72 1.67 1.68 1.68 1.70 1.72 1.69 1.69 1.69 1.72 1.73
105 T.C. 20.1 20.3 20.4 22.6 24.5 20.6 20.9 20.7 23.0 25.0 21.2 21.4 20.9 23.5 25.5 S.C. 19.5 19.0 16.2 16.3 12.6 20.1 19.8 17.2 17.3 13.2 20.7 20.5 18.2 18.4 13.8
K.W. 1.93 1.93 1.93 1.95 1.97 1.93 1.94 1.93 1.96 1.98 1.95 1.95 1.94 1.97 1.99
115 T.C. 19.0 19.2 19.1 21.2 22.9 19.5 19.7 19.3 21.5 23.4 20.0 20.2 19.5 21.8 23.9 S.C. 18.5 18.1 15.5 15.8 12.0 19.0 18.8 16.6 16.7 12.6 19.6 19.4 17.6 17.6 13.2
K.W. 2.17 2.18 2.17 2.20 2.23 2.18 2.18 2.18 2.21 2.23 2.20 2.20 2.19 2.22 2.24
125 T.C. 17.9 18.0 17.7 19.8 21.3 18.4 18.5 17.9 20.0 21.8 18.9 19.1 18.1 20.2 22.2 S.C. 17.4 17.2 14.9 15.3 11.5 17.9 17.8 15.9 16.1 12.1 18.4 18.3 16.9 16.9 12.6
K.W. 2.42 2.42 2.42 2.45 2.48 2.43 2.43 2.42 2.45 2.48 2.45 2.45 2.44 2.47 2.50
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handlers Coils T.C. S.C. KW
AV*24 – 0.97 0.93 1.06
AV*36 – 0.98 0.92 1.03
AHX18 – 0.95 0.92 1.06
AHX24 – 0.97 0.93 1.06
AHX30 – 0.98 0.96 1.05
AHX36 – 0.98 0.95 1.08
MV12B FC/MC/PC35B 0.96 0.96 1.00
MV12B FC/MC/PC35C 0.96 0.96 1.00
MV12B FC/MC/PC35B 0.98 0.98 1.01
MV12B FC/MC/PC35C 0.98 0.98 1.01
MV12D FC/MC/PC48D 1.00 1.00 1.00
MV12D UC48D 1.00 1.00 1.00

561926-YTG-A-0410
Johnson Controls Unitary Products 19
Furnaces Coils T.C. S.C. KW
T*(8,L)X*A12 FC/MC/PC30A 0.93 0.90 1.00
T*(8,L)X*B12 FC/MC/PC30B 0.94 0.92 1.01
T*9X*B12 FC/MC/PC30B 0.93 0.90 1.00
T*(8,L)X*A12 FC/MC/PC32A 0.93 0.91 1.02
T*(8,L)X*B12 FC/MC/PC35B 0.93 0.92 1.00
T*(8,L)X*C16 FC/MC/PC35C 0.98 0.97 1.02
T*(8,L)X*C20 FC/MC/PC35C 0.98 0.98 1.02
T*9X*B12 FC/MC/PC35B 0.94 0.91 1.03
T*9X*C16 FC/MC/PC35C 0.98 0.93 1.01
T*(8,L)X*A12 FC/MC/PC36A 0.93 0.91 1.00
T*(8,L)X*B12 FC/MC/PC36B 0.93 0.93 0.98
T*(8,L)X*C16 FC/MC/PC36C 0.98 0.98 1.01
T*9X*B12 FC/MC/PC36B 0.94 0.92 1.01
T*9X*C16 FC/MC/PC36C 0.98 0.96 1.01
T*(8,L)X*A12 FC/MC/PC37A 0.96 0.95 1.03
T*(8,L)X*B12 FC/MC/PC43B 0.95 0.95 1.00
T*9X*C16 FC/MC/PC43C 0.98 0.95 1.02
T*(8,L)X*C16 FC/MC/PC48C 1.01 1.01 1.02
T*9X*C16 FC/MC/PC48C 0.99 0.98 1.01
T*(8,L)X*B12 HD36 0.92 0.88 1.00
T*(8,L)X*A12 UC30A 0.94 0.91 1.01
T*(8,L)X*B12 UC30B 0.94 0.92 0.99
T*9X*B12 UC30B 0.94 0.90 1.01
T*(8,L)X*B12 UC36B 0.90 0.88 0.98
T*(8,L)X*C16 UC36C 0.97 0.95 1.04
T*9X*B12 UC36B 0.91 0.87 1.01
T*9X*C16 UC36C 0.95 0.93 1.00
T*(8,L)X*C16 UC48C 0.98 0.95 1.03
T*9X*C16 UC48C 0.97 0.95 1.02
(Y*(8,L)C/T*8V)*A12 FC/MC/PC30A 0.95 0.92 1.01
(Y*(8,L)C/T*8V)*B12 FC/MC/PC30B 0.96 0.92 1.00
(Y*9C/T*9V)*B12 FC/MC/PC30B 0.95 0.92 1.01
(Y*(8,L)C/T*8V)*A12 FC/MC/PC32A 0.95 0.92 1.02
(Y*(8,L)C/T*8V)*B12 FC/MC/PC35B 0.95 0.91 1.00
(Y*9C/T*9V)*B12 FC/MC/PC35B 0.96 0.94 1.02
(Y*(8,L)C/T*8V)*A12 FC/MC/PC36A 0.95 0.93 1.01
(Y*(8,L)C/T*8V)*B12 FC/MC/PC36B 0.95 0.92 0.99
(Y*9C/T*9V)*B12 FC/MC/PC36B 0.96 0.94 1.01
(Y*(8,L)C/T*8V)*A12 FC/MC/PC37A 0.97 0.95 1.02
(Y*(8,L)C/T*8V)*B12 FC/MC/PC43B 0.97 0.93 1.00
(Y*9C/T*9V)*B12 FC/MC/PC43B 0.97 0.95 1.01
(Y*(8,L)C/T*8V)*A12 HC30 0.94 0.90 1.02
(Y*(8,L)C/T*8V)*A12 HD36 0.95 0.89 1.01
(Y*(8,L)C/T*8V)*B12 HD36 0.94 0.88 1.00
(Y*9C/T*9V)*B12 HD36 0.95 0.89 1.00
(Y*(8,L)C/T*8V)*A12 UC30A 0.96 0.92 1.01
(Y*(8,L)C/T*8V)*B12 UC30B 0.96 0.93 1.00
(Y*9C/T*9V)*B12 UC30B 0.96 0.92 1.01
(Y*(8,L)C/T*8V)*A12 UC36A 0.92 0.89 1.00
(Y*(8,L)C/T*8V)*B12 UC36B 0.92 0.88 0.99
(Y*9C/T*9V)*B12 UC36B 0.92 0.89 1.00
Furnaces Coils T.C. S.C. KW

561926-YTG-A-0410
20 Johnson Controls Unitary Products
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
NOTE: KW RATING IS FOR OUTDOOR AND INDOOR UNITS.
LOW CFM
Continued on next page.
COOLING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
OUTDOOR UNIT MODEL NO. CZH03611(C)
INDOOR COIL MODEL NO. FC62D + MV12D
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 750 800 850
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65 T.C. 25.4 26.8 27.2 29.7 32.8 25.9 27.0 27.3 30.1 33.0 26.4 27.2 27.5 30.4 33.2 S.C. 25.0 22.9 19.4 19.3 15.3 25.6 23.7 19.9 19.8 15.7 26.1 24.6 20.4 20.2 16.1
K.W. 1.00 0.99 0.99 0.96 0.93 0.99 0.98 0.98 0.95 0.92 0.97 0.97 0.97 0.94 0.91
75 T.C. 24.3 25.5 25.7 28.3 31.2 24.9 25.7 25.9 28.6 31.3 25.4 26.0 26.1 28.9 31.5 S.C. 24.0 22.3 18.8 18.7 14.8 24.6 23.1 19.4 19.2 15.3 25.1 23.8 19.9 19.7 15.7
K.W. 1.24 1.23 1.23 1.20 1.17 1.22 1.22 1.22 1.19 1.16 1.21 1.21 1.21 1.18 1.16
85 T.C. 23.3 24.2 24.3 26.9 29.5 23.8 24.5 24.5 27.2 29.7 24.3 24.7 24.8 27.5 29.8 S.C. 23.0 21.8 18.3 18.2 14.4 23.6 22.4 18.8 18.7 14.9 24.1 23.0 19.3 19.2 15.3
K.W. 1.47 1.47 1.47 1.44 1.41 1.46 1.46 1.46 1.43 1.41 1.45 1.45 1.45 1.42 1.40
95 T.C. 22.2 22.9 22.8 25.4 27.9 22.7 23.2 23.1 25.8 28.0 23.3 23.5 23.4 26.1 28.2 S.C. 22.0 21.2 17.7 17.6 14.0 22.6 21.7 18.2 18.2 14.5 23.1 22.2 18.8 18.7 14.9
K.W. 1.71 1.71 1.71 1.68 1.65 1.70 1.70 1.70 1.67 1.65 1.69 1.69 1.69 1.66 1.64
105 T.C. 20.8 21.3 21.0 23.6 26.0 21.3 21.7 21.3 23.8 26.1 21.9 22.1 21.5 24.1 26.2 S.C. 20.6 20.0 16.8 16.8 13.4 21.2 20.5 17.4 17.4 13.7 21.7 21.0 17.9 17.9 14.1
K.W. 2.03 2.03 2.03 2.01 1.98 2.02 2.02 2.02 2.00 1.97 2.00 2.01 2.01 1.99 1.97
115 T.C. 19.4 19.7 19.3 21.7 24.1 20.0 20.2 19.5 22.0 24.2 20.5 20.7 19.7 22.2 24.3 S.C. 19.2 18.8 16.0 16.1 12.8 19.8 19.3 16.6 16.6 13.0 20.4 19.8 17.1 17.1 13.3
K.W. 2.34 2.33 2.34 2.32 2.30 2.33 2.33 2.33 2.31 2.29 2.31 2.32 2.32 2.30 2.28
125 T.C. 18.0 18.2 17.5 19.9 22.2 18.6 18.8 17.7 20.1 22.3 19.1 19.3 18.0 20.4 22.4 S.C. 17.8 17.6 15.2 15.3 12.2 18.4 18.1 15.8 15.8 12.3 19.0 18.5 16.4 16.3 12.5
K.W. 2.65 2.64 2.65 2.63 2.62 2.64 2.64 2.65 2.63 2.61 2.62 2.63 2.64 2.62 2.60
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handlers Coils T.C. S.C. KW
AV*36 – 0.96 0.95 1.04
AV/SV*48 – 0.98 0.98 1.04
AHX36 – 0.96 0.95 1.04
AHX42 – 1.02 1.09 1.05
AHX48 – 0.98 1.01 1.04
AHX60 – 1.04 1.15 1.08
MV12B FC/MC/PC43B 1.00 0.99 1.03
MV12B FC/MC/PC43C 1.00 0.99 1.03
MV16C FC/MC/PC43C 1.00 1.00 1.03
MV12D FC/MC/PC48D 1.00 0.99 1.00
MV12D UC48D 1.00 0.99 1.00
MV16C FC/MC/PC48C 1.01 1.01 1.01
MV16C FC/MC/PC48D 1.01 1.01 1.01
MV16C UC48D 1.01 1.01 1.01
MV20D FC/MC/PC48D 1.00 1.00 1.01
MV20D UC48D 1.00 1.00 1.01
MV12D FC/MC62D 1.00 1.00 1.00
MV20D FC/MC62D 1.01 1.01 1.01