ZENEC ZE-NC520 Mounting instructions

MODEL NO:
NAVIGATION SOFTWARE MANUAL (English)
2-DIN DVD-NAVICEIVER WITH
MOTORIZED 6.95" LCD DISPLAY
1 CH DVB-T TUNER
ZE-DVBT1 0
MODEL NO:

2
2
Copyright note
The product and the information contained herein is subject to change without prior notification.
This manual may not, in whole or in part, be reproduced or transmitted in any form either
electronically or mechanically, including photocopying and recording, without the express written
consent of ZENEC.
© 2008 - ZENEC
Data Source © 2006 Tele Atlas N.V.
Austria: © BEV, GZ 1368/2003
Denmark: © DAV
France: © IGN France
Great Britain: Ordnance Survey data with permission of Her Majesty’s Stationery Office © Crown
Copyright
Italy: © Geonext/DeAgostini
Northern
Ireland:
© Ordnance Survey of Northern Ireland
Norway: © Norwegian Mapping Authority, Public Roads Administration / Mapsolutions
Switzerland: © Swisstopo
The
Netherlands: Topografische ondergrond
Copyright © dienst voor het kadaster en de openbare registers, Apeldorn
All rights reserved.

3
3
Thank you for choosing ZENEC Navigation Software as your door-to-door in-car navigator. Read the
Quick Start Guide first and start using ZENEC Navigation Software right away. This document is the
detailed description of the software. You can easily discover ZENEC Navigation Software while you
are using it; however, we still recommend that you read this manual to understand the screens and
the features of ZENEC Navigation Software.

4
4
Table of contents
1 Warnings and Safety information .................................................................................. 7
2 Getting started with ZENEC Navigation Software....................................................... 8
2.1 Buttons and other controls on the screen ................................................................................. 9
2.1.1 Using keyboards.............................................................................................................................10
2.2 Using the map ......................................................................................................................... 11
2.2.1 Checking the details of a map location ..........................................................................................11
2.2.2 Manipulating the map ....................................................................................................................12
2.2.3 Status information and hidden controls on the map.......................................................................14
2.2.4 Using the Cursor (the selected map location) ................................................................................17
2.3 ZENEC Navigation Software concepts ................................................................................... 17
2.3.1 Smart Zoom ................................................................................................................................... 17
2.3.2 Position markers.............................................................................................................................18
2.3.2.1 Current GPS position and Lock-on-Road ............................................................................................... 18
2.3.2.2 Returning to normal navigation .............................................................................................................. 18
2.3.2.3 Selected location (Cursor) ...................................................................................................................... 19
2.3.2.4 Original position in the Cursor menu ..................................................................................................... 19
2.3.3 Daytime and nightcolour schemes .................................................................................................19
2.3.4 Colour scheme in tunnels...............................................................................................................20
2.3.5 Route calculation and recalculation ...............................................................................................20
2.3.6 Itinerary..........................................................................................................................................20
2.3.7 Route demonstration ......................................................................................................................21
2.3.8 POI (Points of Interest) .................................................................................................................. 21
2.3.9 Speed limit warning ....................................................................................................................... 22
2.3.10 TMC (Traffic Message Channel) .................................................................................................22
3 Navigating with ZENEC Navigation Software............................................................ 24
3.1 Selecting the destination of a route ........................................................................................ 24
3.1.1 Selecting the Cursor as the destination ..........................................................................................24
3.1.2 Entering an address or part of an address.......................................................................................25
3.1.2.1 Entering an address (Europe) ................................................................................................................. 25
3.1.2.2 Entering an address if house numbering is restarted .............................................................................. 26
3.1.2.3 Entering an address without knowing the district/suburb ....................................................................... 27
3.1.2.4 Selecting an intersection as the destination ............................................................................................ 28
3.1.2.5 Selecting a city centre as the destination ................................................................................................ 29
3.1.2.6 Entering an address with a postal code .................................................................................................. 30
3.1.2.7 Tips on entering addresses quickly ......................................................................................................... 31
3.1.3 Selecting the destination from your Favourites..............................................................................31
3.1.4 Selecting the destination from the POIs.........................................................................................32
3.1.5 Selecting the destination from the History.....................................................................................33
3.1.6 Selecting the destination by entering its coordinates .....................................................................33

5
5
3.2 Creating a multi-point route (inserting a via point) ............................................................... 33
3.3 Creating a multi-point route (appending a new destination) ................................................. 34
3.4 Editing the route ..................................................................................................................... 35
3.5 Watching the simulation of the route ...................................................................................... 35
3.6 Pausing the active route ......................................................................................................... 35
3.7 Deleting the next via point from the route .............................................................................. 36
3.8 Deleting the active route......................................................................................................... 36
3.9 Saving a route ......................................................................................................................... 36
3.10 Loading a saved route .......................................................................................................... 37
4 Reference Guide ............................................................................................................. 38
4.1 Map screen ............................................................................................................................. 38
4.1.1 Icons on the map ............................................................................................................................40
4.1.1.1 GPS position quality indicator ................................................................................................................ 41
4.1.1.2 Status indicator strip ............................................................................................................................... 41
4.1.1.3 Next two route events (Turn Preview fields) ........................................................................................... 41
4.1.2 Objects on the map.........................................................................................................................42
4.1.2.1 Streets and roads .................................................................................................................................... 42
4.1.2.2 3D object types ....................................................................................................................................... 43
4.1.2.3 Elements of the active route .................................................................................................................... 43
4.1.3 Avoid menu....................................................................................................................................44
4.1.4 Cursor menu...................................................................................................................................44
4.1.5 Position menu ................................................................................................................................46
4.1.6 Route Information screen...............................................................................................................46
4.1.7 Trip Information screen .................................................................................................................47
4.1.7.1 Trip Computer screen ............................................................................................................................. 49
4.1.8 Quick menu.................................................................................................................................... 49
4.1.9 GPS Data screen ............................................................................................................................ 50
4.2 Find menu ............................................................................................................................... 51
4.3 Route menu ............................................................................................................................. 52
4.4 Manage menu ......................................................................................................................... 52
4.4.1 Manage Saved Routes.................................................................................................................... 53
4.4.2 Manage History.............................................................................................................................. 53
4.4.3 Manage POIs.................................................................................................................................. 53
4.4.4 Manage Favourites.........................................................................................................................55
4.4.5 User Data Management.................................................................................................................. 55
4.5 Settings menu .......................................................................................................................... 55
4.5.1 Map Screen settings .......................................................................................................................56
4.5.2 Navigation settings.........................................................................................................................57
4.5.3 Route Planning options ..................................................................................................................58
4.5.4 Regional settings............................................................................................................................59
4.5.5 Menu settings.................................................................................................................................60

6
6
4.5.6 TMC settings..................................................................................................................................61
4.5.7 Warning settings ............................................................................................................................62
5 Glossary........................................................................................................................... 63
6 End User Licence Agreement........................................................................................ 65

7
7
1 Warnings and Safety information
ZENEC Navigation Software is a navigation system that helps you find your way to your destination
with its built-in GPS receiver. ZENEC Navigation Software does not transmit your GPS position;
others cannot track you.
It is important that you look at the display only when it is safe to do so. If you are the driver of the
vehicle, we recommend that you operate ZENEC Navigation Software before you start your journey.
Plan the route before your departure and stop if you need to change something in the route.
You must obey the traffic signs and follow the road geometry. If you deviate from the route that
ZENEC Navigation Software recommended, ZENEC Navigation Software changes the instructions
accordingly.
For more information, consult the End User Licence Agreement (page 65).

8
8
2 Getting started with ZENEC Navigation Software
ZENEC Navigation Software is optimised for in-car use. You can use it easily by tapping the screen
buttons and the map with your fingertips.
ZENEC Navigation Software can plan routes throughout the whole installed map set; you do not need
to change maps or switch to a poorly detailed general map to navigate between map segments or
countries.
Tasks Instructions
Using a stylus You do not need a stylus to use ZENEC Navigation Software. Tap the
buttons and the map with your fingertips.
Double tapping the
screen
You do not need to tap the screen twice for any action. With buttons and
controls, a single tap is enough.
Tapping and holding
the screen You do not need this to access the basic navigation functions. Tap and keep
pressing the following buttons to reach extra functions:
xTap and hold on the Map screen: you can set the minimum and
maximum zoom level of Smart Zoom.
xTap and hold any of the buttons on the
Map screen: you can set or reset the zoom value of the button (2D
map).
xTap and hold any of the buttons on the
Map screen: you can set or reset the tilt and zoom values of the button
(3D map).
xTap and hold on list and menu screens: the Navigation
menu appears.
xTap and hold any of the , , , , , and
buttons on the Map screen: you can rotate, tilt or scale the map
continuously.
xTap and hold on keyboard screens: you can delete
several characters quickly.
xTap and hold or in long lists: you can scroll pages
continuously.
xTap and hold the buttons in the Quick menu to open screens related
with the function of the button from the Manage menu or the Settings
menu.
Gestures (drag&drop) You do not need gestures to access the basic navigation features. You need
to drag and drop the screen only in cases like:
xMoving the handle on a slider.
xMoving the map: grab the map, and move it in the desired direction.

9
9
Tasks Instructions
xShortcut to open the Map screen: slide your finger from the bottom
right corner to the bottom left corner on any screen.
xShortcut to open the Navigation menu: slide your finger from the top
left corner to the bottom left corner on any screen.
Start using ZENEC Navigation Software
When ZENEC Navigation Software is started the first time, you need to do the following:
1. Select the written language of the application interface. Later you can change it in Settings
(page 59).
2. Select the language and speaker used for voice guidance messages. Later you can change it
in Settings (page 59).
3. Read the warning message and tap Accept to continue.
After this, the Navigation menu appears and you can start using ZENEC Navigation Software.
The typical way of using ZENEC Navigation Software is to select a destination, and start navigating.
You can select your destination in the following ways:
xUse the selected location on the map (the Cursor) (page 24).
xEnter a full address or a part of an address, for example a street name without a house number
or the names of two intersecting streets (page 25).
xEnter an address with postal code (page 30). This way you do not need to select the name of
the settlement and the search for street names might be faster as well.
xUse a coordinate (page 33)
xUse a saved location:
xa Favourite (page 31)
xa POI (page 32)
xthe History of previously set destinations and waypoints (page 33)
2.1 Buttons and other controls on the screen
When you are using ZENEC Navigation Software, you usually tap buttons on the touch screen.
You only need to confirm selections or changes in ZENEC Navigation Software if the application
needs to restart, it needs to perform a major reconfiguration, or you are about to lose some of your
data or settings. Otherwise, ZENEC Navigation Software saves your selections and applies the new
settings without confirmation as soon as you use the controls.

10
10
Type Example Description How to use it
Button
Tap it to initiate a function, to open a
new screen, or to set a parameter.
Tap it once.
Icon
Shows GPS position quality. Some icons also function
as a button. Tap them
once.
List
When you need to select from
several options, they appear in a list.
Move between pages
with the and
buttons and tap the value
that you want.
Slider
When a feature has several different
unnamed values, ZENEC Navigation
Software shows an indicator on a
gauge that displays and sets a value
from a range.
xDrag the handle to
move the slider to
its new position.
xTap the slider
where you want
the handle to
appear; the thumb
jumps there.
Switch
When there are only two choices, a
checkmark shows whether the
feature is enabled.
Tap it to turn the switch
on or off.
Virtual
keyboard
A
lphabetic and alphanumeric
keyboards to enter text and
numbers.
Each key is a touch
screen button.
2.1.1 Using keyboards
You only need to enter letters or numbers in ZENEC Navigation Software when you cannot avoid it.
You can type with your fingertips on the full-screen keyboards and you can switch between various
keyboard layouts, for example ABC, QWERTY, or numerical.
Task Details
Switching to another keyboard
layout, for example from an English
QWERTY keyboard to a Greek
keyboard
Tap , and select from the list of available
keyboard types.
ZENEC Navigation Software remembers your last keyboard
choice and offers it the next time you need to enter data.
Correcting your entry on the
keyboard
Remove the unneeded character(s): tap .
Tap and hold the button to delete the entire input string.

11
11
Task Details
Entering a space, for example
between a first name and a family
name or in multi-word street names Tap .
Entering symbols
Tap to switch to a keyboard offering symbol characters.
Finalising the keyboard entry
Tap .
2.2 Using the map
The map screen is the most frequently used screen of ZENEC Navigation Software. It can be
accessed from the Navigation menu by tapping .
For further information about the map screen, see page 38.
2.2.1 Checking the details of a map location
xIf you are interested in the details of your current position during navigation:
1. Check the bottom line of the map. It shows the current street and house number
information.
2. For further details, tap to open the Position menu.
3. Tap . The address, the coordinate and the list of nearby POIs will be
displayed.
xYou can check the details of any other location by selecting it on the map:
1. Tap the map anywhere to open the map control buttons.
2. Tap the desired location on the map. The Cursor ( ) appears there. The address of
the location is displayed at the bottom of the map.
3. For further details, tap to open the Cursor menu.

12
12
4. Tap . The address, the coordinate and the list of nearby POIs will be
displayed.
xIt is even easier if you select the desired point in the Find menu. Then the Cursor menu opens
automatically. You only need to tap the button.
2.2.2 Manipulating the map
Position markers on the map:
xCurrent GPS position: (page 18)
xSelected location (Cursor): (page 19)
The following controls help you modify the map view to suit your actual needs the best. Most of these
controls appear only if you tap the map once, and disappear after a few seconds of inactivity.
Action Button(s) Description
Moving the map with
drag&drop
No buttons You can move the map into any direction: tap
and hold the map, and move your finger to the
direction in which you want to move the map.
If GPS position is available and you have
moved the map, the button appears.
Tap this button to return to the GPS position.
Opening/closing map
control buttons Tap this button to show or hide the following
map control buttons:
xZoom in/out
xRotate left/right (3D map only)
xTilt up/down (3D map only)
xZoom preset buttons (2D map only)
xTilt and zoom preset buttons (3D map
only)
xReturn to GPS position button
xSmart Zoom button
Zooming in and out
,
Changes how much of the map is displayed
on the screen.
ZENEC Navigation Software uses high-quality
vector maps that let you see the map at
various zoom levels, always with optimised
content. It always displays street names and
other text with the same font size, never
upside-down, and you only see the streets and
objects that you need.
Map scaling has different limits in 2D and in

13
13
Action Button(s) Description
3D map view modes.
Tilting up and down
,
Changes the vertical view angle of the map in
3D mode.
Rotating left and right
,
Changes the horizontal view angle of the map
in 3D mode.
When GPS position is available, ZENEC
Navigation Software always rotates the map
so its top faces your direction of travel (Track-
Up orientation). You can turn away from
Track-Up with these buttons.
If GPS position is available and you have
rotated the map, the button appears.
Tap this button to re-enable the automatic
map rotation.
Viewing modes
,
Gives you the following map perspectives in
ZENEC Navigation Software:
xclassic top-down view (2D)
xperspective view (3D)
The value always shows the mode the button
switches to: If you are in 2D mode, you can
see the button and you need to tap it to
switch to 3D mode.
Smart Zoom
ZENEC Navigation Software can automatically
rotate, scale and tilt the map and give you the
optimal view:
xWhen you are approaching a turn,
ZENEC Navigation Software zooms in
and raises the view angle to let you
easily recognise your manoeuvre at the
next junction.
xIf the next turn is at a distance, ZENEC
Navigation Software zooms out and
lowers the view angle to show you the
road in front of you.
Tap this button once to enable Smart Zoom.
Tap&hold the button to set the zoom limits of
Smart Zoom.
Returning to normal
navigation (back to
the GPS position with
automatic map
rotation)
Tap this button to move the map back to the
current GPS position. If the map has been
rotated in 3D mode, automatic map rotation is
also re-enabled.

14
14
Action Button(s) Description
Zoom preset buttons
Tap one of the preset buttons to set the zoom
level to a fix, predefined value. Smart Zoom is
disabled. These buttons are available in 2D
mode.
Tap&hold any of the buttons to set its value to
the current zoom level, or to reset it to its
original value.
Tilt and zoom preset
buttons Tap one of the preset buttons to set the tilt and
zoom levels to fix, predefined values. Smart
Zoom is disabled. These buttons are available
in 3D mode.
Tap&hold any of the buttons to set its value to
the current tilt and zoom levels, or to reset it to
its original value.
Map scale
ZENEC Navigation Software shows the scale
of the map in 2D mode.
2.2.3 Status information and hidden controls on the map
The following information appears in the rounded field in the top left corner, the Turn Preview field.
When tapping this area, the result depends on the information currently shown.
Icon Information Details Action
There is no active route If there is no route to be
navigated, this icon appears in
the Turn Preview field.
Tap this area to open Find.
,
There is no valid GPS
position.
If an active route exists, and
there is no valid GPS position,
the view of the sky above you is
shown with coloured dots for
each satellite. Some dots need
to turn green to be able to
navigate.
Tap this area to open the Route
Information screen.
If the icon is a static
picture, route
calculation is needed
GPS position and an active
route are available, but
automatic off-route recalculation
is switched off, and you deviated
from the route.
Tap this area to make ZENEC
Navigation Software recalculate
the recommended route.
If the icon is animated,
route calculation is in
progress
ZENEC Navigation Software is
calculating or recalculating the
route.
Nothing happens if you tap this
area of the screen.
,
Next route event (next
manoeuvre) GPS position and an active
route are available, and you
navigate the recommended
route. This area gives you
information about the type and
distance of the next route event.
Tap this area to open the Route
Information screen.

15
15
The following area appears next to the above described rounded area. When tapping this area, the
result depends on the information currently shown.
Icon Information Details Action
There is no valid GPS
position If there is no valid GPS position, this symbol
appears here.
Tap this
area to
open the
GPS Data
screen to
check the
signal
status or
the
connection
settings.
Traffic restriction When GPS position is available but there is no
route to be navigated, the traffic restriction of the
upcoming intersection is shown here if there is
any.
Nothing
happens if
you tap this
area of the
screen.
,
Second route event
(manoeuvre after the
next manoeuvre)
When GPS position and an active route are both
available, this field shows the route event that
follows the next route event shown in the above
described area.
Tap this
area to
open the
Itinerary
screen with
the turn by
turn
guidance
instructions
.
Stops the running
simulation This icon appears during Route Simulation. Tap this area to
stop the
simulation.
Route recalculation
progress During route recalculation, this field shows the
recalculation progress between 0% and 100%.
Nothing
happens if
you tap this
area of the
screen.
Indicator strip - sounds muted/enabled
- TMC status
Nothing
happens if
you tap this
area of the
screen.
The following symbols appear in the Indicator strip:
Icon Description
The sound output of ZENEC Navigation Software is muted.
The sound output of ZENEC Navigation Software is enabled.
No TMC receiver is connected or TMC is turned off.

16
16
Icon Description
A TMC receiver is connected and a radio station with TMC broadcast is received.
There are new, unread TMC events.
A part of the route is bypassed based on TMC events.
A part of the route is mentioned in TMC events but could not be bypassed (for example,
the destination is on a congested street).
The following information can be seen in the three data fields shown on the map screen. Tap this area
to open the Trip Information screen where you can select which values to be shown in these three
fields.
When there is no active route, these fields show the following information: current speed, compass
and the current time of day.
Icon Type More information
Compass Shows the direction of your heading both when the
map is automatically rotated (3D) and when the
map is always facing North (2D).
Speed information There are speed values that can be shown:
xCurrent speed
xSpeed limit on the current road
Time information There are time values that can be shown:
xCurrent GPS time
xTime remaining to reach the destination
xTime remaining to reach the next via point
xEstimated arrival time at the destination
xEstimated arrival time at the next via point
Distance information There are distance type values that can be shown:
xDistance remaining to reach the destination
xDistance remaining to reach the next via
point
xCurrent altitude
The next area is the GPS position quality indicator field. Tap this area to open the Quick menu (page
49).
Icon Status for More information
GPS position quality A higher number of lit bars indicates better GPS
position accuracy.

17
17
2.2.4 Using the Cursor (the selected map location)
First, place the Cursor at the desired map location with one of the following options:
xUse the Find menu to select a location. The map returns with the selected point (the Cursor) in
the middle, and the Cursor menu appears with the available options.
xTap the screen and tap again to place the Cursor at the desired location. Now tap to
open the Cursor menu.
You can perform the following actions:
Button Action
In the active route, uses the Cursor as the start point by replacing the current
GPS position
In the active route, uses the Cursor as the destination by replacing the previous
destination
In the active route, uses the Cursor as a via point (an intermediate destination)
preceding the destination
In the active route, uses the Cursor as the destination while keeping the
previous destination as a via point
Shows the different routes calculated by the available routing methods. Choose
the one that suits your needs the best
Saves the Cursor as a POI
Saves the Cursor as a Favourite location
Marks the map with a Pin at the Cursor
Opens a screen with the name, address and coordinate information of the
Cursor, and the list of POIs near it
2.3 ZENEC Navigation Software concepts
2.3.1 Smart Zoom
Smart Zoom provides much more than just a usual automatic zoom feature:
xWhile following a route calculated by ZENEC Navigation Software: when approaching a
turn, it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the
next junction. If the next turn is at a distance, it will zoom out and lower the view angle to be flat
so you can see the road in front of you.
xWhile driving without an active route in ZENEC Navigation Software: Smart Zoom will
zoom in if you drive slowly and zoom out when you drive at high speed.

18
18
Enabling Smart Zoom
Tap the map to let the map control buttons appear, and then tap to enable Smart Zoom.
Fine-tuning Smart Zoom
Tap the map to let the map control buttons appear, and then tap and hold to open the Smart
Zoom Settings window. Modify the zoom limits of Smart Zoom if necessary.
2.3.2 Position markers
2.3.2.1 Current GPS position and Lock-on-Road
When your GPS position is available, ZENEC Navigation Software marks your current position with
the icon on the map.
The icon is aligned to the nearest road to suppress GPS position errors. The direction of the
icon is one of the directions of the route.
To use the current GPS position, tap . The Position menu appears and you can save the GPS
position as one of the following:
xa Favourite
xa POI
xa map marker Pin
2.3.2.2 Returning to normal navigation
When GPS position is available, and you have moved the map (the icon is moving or is not
even visible), or you have rotated the map in 3D mode, the button appears. Tap it to move the
map back to the GPS position and re-enable Track-up map orientation (automatic map rotation).
Note! Even if you move the map while you are driving, ZENEC Navigation Software
continues navigating if there is an active route: it plays the voice instructions and
displays the turn preview icons according to your current GPS position.

19
19
2.3.2.3 Selected location (Cursor)
If you select a location in the Find menu, or you tap the map when the map control buttons are visible,
the Cursor appears at the selected point on the map. ZENEC Navigation Software displays the Cursor
with a radiating red dot ( ) to make it visible at all zoom levels, even when it is in the background
of a 3D map view.
When the Cursor is set, tap . The Cursor menu appears and you can use the Cursor as one of
the following:
xthe start point of a route
xa via point in a route
xthe destination of a route
You can also search for POIs around the Cursor.
Or you can save the location of the Cursor as:
xa Favourite
xa POI
xa map marker Pin
2.3.2.4 Original position in the Cursor menu
When the Cursor menu is open, a special icon ( ) shows the Cursor position the menu was
opened with.
You can move and zoom the map, and you can set the Cursor to a different place. The usual Cursor
() appears, and the buttons of the Cursor menu initiate actions for this new location.
To return to the original Cursor position, tap . The map jumps back to the position with which the
Cursor menu was opened, and the icon appears again.
2.3.3 Daytime and nightcolour schemes
ZENEC Navigation Software uses different colour schemes during the day and during the night.
xDaytime colours are similar to paper road maps.
xThe night colour schemes use dark colours for large objects to keep the average brightness of
the screen low.
ZENEC Navigation Software offers different daytime and night colour schemes. It can also switch
automatically between the daytime and the night scheme based on the current time and GPS position
a few minutes before sunrise, when the sky has already turned bright, and a few minutes after sunset,
before it becomes dark.

20
20
2.3.4 Colour scheme in tunnels
When entering a tunnel, the colours of the map change. All buildings disappear, the large objects
(such as surface waters or forests) and the empty areas between roads become black.
However roads and streets keep their original colours from the daytime or night colour scheme
currently used.
After leaving the tunnel, the original colours return.
2.3.5 Route calculation and recalculation
ZENEC Navigation Software calculates the route based on your preferences:
xRoute calculation method:
xFast
xShort
xEconomical
xEasy
xRoad types
xUnpaved Roads
xPermit Needed
xMotorways
xToll Roads
xCharge Roads
xFerries
xCross-border Planning
ZENEC Navigation Software automatically recalculates the route if you deviate from the proposed
itinerary.
If your hardware supports TMC: Depending on the type of the TMC event, ZENEC Navigation
Software also recalculates the route if a TMC event concerns a part of the recommended route.
For further information about Route Planning options, see page 58.
2.3.6 Itinerary
The Itinerary is the list of the route events, that is, the driving instructions.