ZENEC ZE-MU620IR User manual

6.2"/16:9 UNIVERSAL MONITOR
ZE-MU620IR
MODEL NO:
INSTRUCTION MANUAL
ZE-MU620IR Manual D+E.ai 1 12.10.2007 12:06:06 Uhr

2
ZE-MU620IR
Vielen Dank für den Kauf dieses ZENEC Produktes!
Mit dem Kauf des ZE-MU620IR haben Sie sich für ein technisch ausgereiftes Produkt ent-
schieden, das Ihnen durch die Verwendung von hochwertigen Materialien und Bauteilen eine
lange Lebensdauer garantiert.
Bei dem ZE-MU620IR von ZENEC handelt es sich um einen 6.2"/16:9 TFT-LCD Aktiv-Matrix
Universalmonitor, der sich aufgrund seiner Größe und den vielfältigen Anschlussmöglichkeiten in
jede A/V-Anlage integrieren lässt.
Größten Wert wurde bei der Entwicklung auf die Bedienungsfreundlichkeit gelegt. Dennoch
muss der ein oder andere Bedienungsschritt mit Hilfe dieser Bedienungsanleitung näher erläutert
werden. Zusätzlich soll sie dazu beitragen, dass Sie das ganze Potenzial dieses Produktes nutzen
können. Lesen Sie sich vor allem die Garantiebestimmungen genau durch, um im Falle eines
Defektes den optimalen Service und Kundendienst nutzen zu können.
GERÄTE–FEATURES
■6.2"/16:9 TFT-LCD Aktiv-Matrix Universalmonitor mit hoher Leuchtintensivität
■TFT-LCD Panel mit 137.5 x 77.2 mm Bildgröße und 1440 x 234 Pixel Auflösung
(336'960 Bildpunkte)
■Großer Betrachtungswinkel, links/rechts > 60° / oben > 60° / unten > 30°
■Kompaktes und flaches Gehäuse
■Multi-Norm Videosystem mit automatischer PAL/NTSC-Umschaltung
■On-Screen Menü für Bild- und Menüeinstellungen
■Integriertes 2-CH IR-Sendemodul zur Ansteuerung von drahtlosen Kopfhörern
■A/V-Interface für Stromversorgung und A/V-Eingänge
■2 x A/V-Eingänge
■IR-Fernbedienung
BESONDERHEITEN
6.2"/16:9 High Density Display:
Der ZE-MU620IR verfügt über ein 6.2"Aktiv-Matrix TFT-LCD Farbdisplay im 16:9 Format.
Das hochauflösende Display verfügt über 336‘960 Bildpunkte für perfekt aufgelöste Bilddetails
mit hoher Leuchtintensivität.
Kompatibilität:
Dieser Monitor ist mit den beiden Videoformaten PAL und NTSC kompatibel und verfügt über
einen interne Videoelektronik mit automatischer Formatumschaltung.
Verwendung:
Der ZE-MU620IR kann mit allen Videoquellen kombiniert werden, welche über einen Composite-
Videoausgang (Cinch) verfügen. Dazu zählen alle handelsüblichen DVD-Player und DVB-T bzw.
TV-Tuner.
ZE-MU620IR Manual D+E.ai 2 12.10.2007 12:06:06 Uhr

3
DEUTSCH
LIEFERUMFANG
INHALTSVERZEICHNIS
SICHERHEITSHINWEISE ...............................................................................4
DER UNIVERSALMONITOR ..................................................................... 5-10
DIE EINZELNEN TASTEN ............................................................................................. 5
FERNBEDIENUNG ........................................................................................................ 6
MENÜEINSTELLUNGEN ............................................................................................... 7
INSTALLATION DES GERÄTES .................................................................................. 8
FEHLERSUCHE ........................................................................................................... 9
SPEZIFIKATIONEN ................................................................................................... 10
GARANTIE .......................................................................................................... 22-23
Universalmonitor 1
Fernbedienung 1
Montagerahmen 1
Anschlußkabel 1
Bedienungsanleitung 1
Schrauben PM4x8 4
Abbildung Element Menge
ZE-MU620IR Manual D+E.ai 3 12.10.2007 12:06:08 Uhr

4
SICHERHEITSHINWEISE
1. Dieses Gerät ist für den Betrieb an einem Bordnetz mit +12V (DC) und Minus gegen
Masse geeignet und darf auch nur so betrieben werden.
2. Bedienen Sie das Gerät nur so, wie es in dieser Bedienungsanleitung beschrieben wird.
Alles andere kann zum Erlöschen Ihres Garantieanspruches führen.
3. Zerlegen oder modifizieren Sie das Gerät nicht. Dies kann zu einer Beschädigung des
Gerätes führen und Ihr Garantieanspruch erlischt dadurch.
4. Benutzen Sie nur das Originalzubehör um das Gerät zu installieren und zu betreiben, da
ansonsten eine Beschädigung des Gerätes riskiert wird.
5. Bevor Sie eine defekte Sicherung austauschen, sollten Sie erst einmal überprüfen was
der Grund für den Kurzschluss war. Achten Sie dabei besonders auf die Kabel der
Stromversorgung! Wenn der Kurzschluss nicht durch einen Fehler in der Stromversorgung
resultiert, müssen Sie die defekte Sicherung gegen ein neues Exemplar mit identischen
Werten austauschen. Sollte der Kurzschluss immer noch vorhanden sein, wenden Sie
sich bitte an Ihren ZENEC-Händler.
6. Achten Sie bei der Installation des Monitors darauf, dass er den Fahrer des Fahrzeuges
nicht vom Verkehrsgeschehen ablenkt oder ihm in irgendeiner Weise die Sicht versperrt.
Informieren Sie sich deshalb vor der Installation des Gerätes über die in Ihrem Land
geltenden Gesetze und Verkehrsvorschriften, die den Gebrauch eines solchen Gerätes
betreffen.
7. Achten Sie darauf dass bei ausgeschaltetem Motor die Batterie des Fahrzeuges nicht
entladen wird. Da es sich bei dem Gerät um einen Verbraucher handelt und die Batterie
nur bei laufendem Motor aufgeladen wird, kann es passieren dass die Batterie entladen
wird und das Fahrzeug sich nicht mehr starten lässt.
8. Reinigen Sie das Display nicht mit ätzenden Chemikalien oder Lösungsmitteln. Dies
kann zu einer dauerhaften Beschädigung des Displays führen.
9. Achten Sie bei der Installation des Gerätes darauf, dass es nicht dem direktem
Sonnenlicht ausgesetzt ist und auch nicht in der Nähe von Wärmequellen wie z.B den
Öffnungen der Heizung montiert wird. Die Umgebungstemperatur sollte daher zwischen
0°C und 45°C liegen. Sollte die Temperatur im Inneren des Fahrzeuges extrem hoch
sein, ist es empfehlenswert den Innenraum vor der Inbetriebnahme des Gerätes erst
einmal etwas abkühlen zu lassen.
10. Bei extrem kalten Temperaturen kann das Bild etwas dunkel und die Bewegungen
etwas langsam sein. Sobald der Monitor seine Betriebstemperatur erreicht hat, arbeitet
das Gerät bzw. das Display wieder normal.
11. Kleine, schwarze und leuchtende Punkte innerhalb des Displays sind normal für diese
Art von Produkt.
12. Das Display darf keinen harten Stößen oder Erschütterungen ausgesetzt werden, da
dies zu einer dauerhaften Beschädigung führen kann. Falls Sie mit der auslaufenden
Flüssigkeit in Kontakt kommen, sollten Sie gegebenenfalls einen Arzt aufsuchen. Alle
Gegenstände die ebenfalls mit der LCD-Flüssigkeit in Kontakt gekommen sind, sollten
sorgfältig mit Wasser gereinigt werden.
13. Wenn Sie Fragen oder Probleme bei der Installation haben, wenden Sie sich bitte an
einen ZENEC-Händler oder an den jeweiligen Landesvertrieb.
ZE-MU620IR Manual D+E.ai 4 12.10.2007 12:06:08 Uhr

5
DEUTSCH
DER UNIVERSALMONITOR
DIE EINZELNEN TASTEN
1. [POWER]-Taste
■Drücken Sie die [POWER]-Taste, um das Gerät einzuschalten.
■Halten Sie die [POWER]-Taste gedrückt, um das Gerät wieder auszuschalten.
2. [SELECT]-Taste
■Drücken Sie die [SELECT]-Taste, um das zwischen den A/V-Eingängen AV1 und AV2 zu
wählen.
3. [MENU]-Taste
■Drücken Sie die [MENU]-Taste, um das Hauptmenü des Monitors aufzurufen.
■Nachdem Sie das Hauptmenü aufgerufen haben, können Sie durch Drücken der [MENU]-
Taste zwischen den verschiedenen Menüpunkten wählen.
4. [] / []-Tasten
■Drücken Sie eine der [] / []-Tasten, um die Bildschirmhelligkeit zu verändern.
■Nachdem Sie das Hauptmenü aufgerufen haben, können Sie durch drücken einer der
[] / []-Tasten den Wert des ausgewählten Menüpunktes entsprechend verändern.
4
Taking care of you display
CAUTION! The material of display area is made of glass with a protector film attached on it. Do not
use hard or sharp objects to strike or scratch the surface of the display area, as such actions may result
in picture distortion or scar.
Buttons on LCD monitor
1. POWER
2. SELECT
3. MENU
4. ∧,∨Button
1) Power On/Off Button
Press the power button; the LCD monitor will turn on. Press again; the monitor will turn off.
2) SELECT
Press the SELECT button to switch AVX1 and AVX2.
3) Menu Button
Press MENU to choose all sorts of adjustment functions.
Press “MENU” button continuously, the following functions can be selected in proper
sequence. Press “∨” and “∧” to change the value of the item you selected .
BRIGHTNESS: Adjust the brightness from -14(MIN) to +14(MAX).
CONTRAST: Adjust the contrast from -14(MIN) to +14(MAX).
➁ ➂➀ ➃
ZE-MU620IR Manual D+E.ai 5 12.10.2007 12:06:09 Uhr

6
FERNBEDIENUNG
1. [POWER]-Taste
■Drücken Sie die [POWER]-Taste, um das Gerät ein- und auszuschalten.
2. [MENU +]-Taste
■Drücken Sie die [MENU+]-Taste, um den nächsten Menüpunkt auszuwählen.
3. [MENU –]-Taste
■Drücken Sie die [MENU-]-Taste, um den vorherigen Menüpunkt auszuwählen.
4. [MODE]-Taste
■Drücken Sie die [MODE]-Taste, um zwischen den A/V-Eingängen AV1 und AV2 zu wäh-
len.
5. [–]-Taste
■Drücken Sie die [–]-Taste, um den Wert des ausgewählten Menüpunktes zu verrin-
gern.
6. [+]-Taste
■Drücken Sie die [+]-Taste, um den Wert des ausgewählten Menüpunktes zu erhö-
hen.
1
2
3
56
4
ZE-MU620IR Manual D+E.ai 6 12.10.2007 12:06:09 Uhr

7
DEUTSCH
MENÜEINSTELLUNGEN
1. Drücken Sie die [MENU]-Taste, um das Hauptmenü des Monitors aufzurufen und durch
erneutes Drücken den gewünschten Menüpunkt auszuwählen.
2. Drücken Sie eine der [] / []-Tasten, um den Wert des ausgewählten Menüpunktes
entsprechend zu verändern.
CONTRAST
BRIGHTNESS
COLOR
TINT
SCREEN MODE
RESET
: Adjust
0
-3
+1
0
WIDE
�
: Select
SCREEN ROTAT E
SCREEN OFF
IR TRANSMIT CHNB
BRIGHTNESS: Helligkeitseinstellung (-14 bis +14)
CONTRAST: Kontrasteinstellung (-14 bis +14)
COLOR: Farbeinstellung (-14 bis +14)
TINT (nur NTSC): Farbton (G1 bis G14 und R1 bis R14)
RESET: Alle Werte werden in den Auslieferungszustand (Werkseinstellung) zurückgesetzt
SCREEN MODE: Auswahl des Bildformates (16:9 oder 4:3)
SCREEN ROTATE: Anzeige des Bildes normal oder um 180 Grad gedreht
IR TRANSMIT: Auswahl zwischen CHNA (2.3/2.8 MHz) und CHNB (3.2/3.8 MHz)
SCREEN OFF: Bildschirm ein- bzw. ausschalten
ZE-MU620IR Manual D+E.ai 7 12.10.2007 12:06:10 Uhr

8
INSTALLATION DES GERÄTES
+12V (Gelb)
ACC (Rot)
GND (Schwarz)
Rot
Schwarz AV 1
AV 2
+12V (Gelb)
■Verbinden Sie den B+-Anschluss des Monitors mit einer permanenten +12V (DC)
Spannungsquelle des Fahrzeuges.
ACC (Rot)
■Verbinden Sie den ACC-Anschluss des Monitors mit dem entsprechenden ACC-An-
schluss des Fahrzeuges, welcher bei der Schlüsselposition „ACC“ eine +12V (DC)
Spannung liefert.
GND (Schwarz)
■Verbinden Sie den Masse-Anschluss des Monitors mit einer guten Chassismasse des
Fahrzeuges.
AV 1 und AV 2
■Videoeingang (gelber Cinchstecker), zum Anschluss einer externen Videoquelle.
■Audioeingang R (roter Cincheingang), zum Anschluss einer externen Audioquelle.
■Audioeingang L (weißer Cinchstecker), zum Anschluss einer externen Audioquelle.
ZE-MU620IR Manual D+E.ai 8 12.10.2007 12:06:10 Uhr

9
DEUTSCH
FEHLERSUCHE
Problem: Ursache: Lösung:
Kein Bild, obwohl der
Monitor eingeschaltet ist.
1. Die Anschlusskabel sind
nicht richtig ange-
schlossen oder eine
Sicherung ist durchge-
brannt.
2. Das A/V-Interface ist nicht
richtig angeschlossen.
1. Überprüfen Sie die
Anschlusskabel und
wechseln Sie gegebenen-
falls die 2 A Sicherung aus.
2. Überprüfen Sie das
A/V-Interface und
tauschen Sie es ge-
gebenenfalls aus.
Verschwommenes oder
komplett blaues Bild.
1. Starke Störsignale (her-
vorgerufen z.B. durch
Transformatorstationen,
Hochspannungs-
leitungen usw.).
1. Je weiter Sie sich von
der Störquelle entfernen,
desto weniger werden
die Störungen.
Das Bild ist zu dunkel. 1. Die Umgebungs-
temperatur ist zu niedrig.
2. Die Helligkeit ist zu
dunkel eingestellt.
3. Der Bildschirm ist
ausgeschaltet.
1. Dieser Effekt ist typisch für
ein TFT-LCD Panel, wenn
die Umgebungstemperatur
sehr niedrig ist. Nachdem
der Monitor einige Minuten
in Betrieb ist, wird das Bild
wieder normal.
2. Überprüfen Sie die
Helligkeitseinstellung.
3. Schalten Sie den Bild-
schirm wieder ein.
ZE-MU620IR Manual D+E.ai 9 12.10.2007 12:06:11 Uhr

10
SPEZIFIKATIONEN
■Änderungen der technischen Daten und des Designs zum Zwecke
der Verbesserung des Produktes vorbehalten.
Sollten Sie dieses Gerät eines Tages entsorgen müssen, beachten Sie bitte
dass elektrische Gerät nicht mit dem Haushaltsmüll entsorgt werden sollten.
Führen Sie das Gerät wenn möglich dem Recycling zu. Ihre lokalen Behörden
oder Ihr Händler können Sie dementsprechend informieren (Richtlinie über die
Entsorgung elektrischer und elektronischer Ausstattungen).
Spannungsversorgung: 10.5 – 16V (DC)
Betriebsspannung: 12V (DC)
Stromverbrauch: < 1A (typical)
Sendefrequenz IR-Sendemodul: CHNA 2.3/2.8 MHz
CHNA 3.3/3.8 MHz
Betriebstemparatur: -20°C to +70°C
Lagertemperatur: -30°C to 80°C
Abmessungen (BxHxT): 160 x 114 x 28 mm
ZE-MU620IR Manual D+E.ai 10 12.10.2007 12:06:11 Uhr

11
DEUTSCH
ZE-MU620IR Manual D+E.ai 11 12.10.2007 12:06:12 Uhr

12
ZE-MU620IR
Thank you for your purchase of this ZENEC product!
With the ZE-MU620IR monitor, you have chosen a technically mature high quality product
that will give you a long service life and very high reliability, since this product has been
assembled using only high quality parts.
Even though this unit has been designed for intuitive and easy operation, it is recommended
that you read this manual, learning how to operate this device in detail, so you are able to
use all implemented features and functions. Please retain this operating manual in a safe
place after reading it, for future reference.
Read the warranty conditions at the end of this manual, to make sure you benefit from full
warranty coverage.
If you have further questions about this product, please consult the dealer where it was
purchased, or the ZENEC distributor in your country.
TECHNICAL FEATURES
■6.2"/16:9 aspect ratio TFT-LCD panel of high brightness
■TFT-LCD panel with 137.5 x 77.2 mm active display area and 1440 x 234 pixels
panel resolution with a total count of 336‘960 dots
■Large viewing angle left/right > 60° / top > 60° / down > 30°
■Compact and shallow housing design
■Multi-norm system with PAL/NTSC auto switching
■Setup and picture adjustment by on-screen display menu
■Integrated 2-CH IR-transmitter to operate wireless IR-headphones
■A/V extension cord with multiconnector for power supply and A/V-inputs
■2 x A/V-inputs
■IR-remote control
SPECIAL FEATURES
6.2"/16:9 High Density Display:
The ZE-MU620IR is a TFT-LCD active matrix 16:9 video monitor, featuring a 6.2" high quality
color LCD screen. It deploys a color TFT-LCD panel with 336‘960 dots resolution, to give
you excellent picture details.
Compatibility:
The monitor is compatible with PAL and NTSC video streams – the internal video signal
processing electronics automatically synchronize with PAL or NTSC video signals.
Applications:
The ZE-MU620IR will work with any common video source unit, featuring an RCA composite
video output, such as DVD-players or DVB-T resp. TV-tuners.
ZE-MU620IR Manual D+E.ai 12 12.10.2007 12:06:12 Uhr

13
ENGLISH
BOX CONTENTS
CONTENT
SAFETY PRECAUTIONS ........................................................................................... 14
THE LCD MONITOR .............................................................................................15-17
BUTTONS ON LCD MONITOR ...................................................................................15
REMOTE CONTROL FUNCTIONS ............................................................................. 16
MENU SETTINGS ....................................................................................................... 17
CONNECTION LAYOUT............................................................................................. 18
TROUBLESHOOTING................................................................................................19
SPECIFICATIONS....................................................................................................... 20
WARRANTY...........................................................................................................22-23
Appearance Parts Name Quantity
Monitor Main Unit 1pcs
IR-Remote Control 1pcs
Mounting Frame 1pcs
Signal Cable 1pcs
User Manual 1pcs
Screw PM4x8 4pcs
ZE-MU620IR Manual D+E.ai 13 12.10.2007 12:06:13 Uhr

14
SAFETY PRECAUTIONS
1. The unit is designed for using with a DC +12V, negative ground battery power supply, it
may not be connected and/or used differently.
2. Do not operate the unit in any way other than described in this manual. Failure to follow
the instructions will invalidate your warranty.
3. Do not disassemble or alter the unit in any way. Any such attempts my result in damage
to the unit and void your warranty.
4. Use only the supplied accessories to install the unit. The use of any accessories except
for those provided might result in damage to the unit.
5. If the fuse blows, first make sure that the cables have not caused a short circuit, then
replace the old fuse with a new one with the same rating.
6. According to the law in different European countries, driving with monitors in use in the
viewing range of the driver is not allowed. Please respect the traffic regulations of your
country, or you might face penalties in case of an accident.
7. Be careful not to run down the car battery while using the unit! Using this unit stationary
without the engine running may drain the battery, and prevent you from being able to
start the engine later on.
8. To clean this monitor, use a glass cleaning agent with a soft towel or tissue. Do not
use any detergents or organic solvents, as these fluids may damage the surface of the
housing.
9. Avoid installing and operating the unit in direct sunlight or near hot air vents. Please note
that the normal working temperature of the unit is between 0°C to 45°C. If the internal
temperature of the vehicle is extremely high, a short cooling down period is necessary
before operating the unit.
10. If the inside of the car is very cold and the monitor is used soon after switching on the
heater, moisture may form on the panel of the unit. Turn off the unit immediately!
Failure to do so may cause the internal components to short-circuit. Allow the unit to
rest for about one hour to allow the condensation to evaporate before operation.
11. In extremely cold environments, the movement of objects in the picture may be slow and
dark. The unit will resume working normally once it reaches its operating temperature.
12. The appearance of small black, shiny dots inside the liquid crystal panel is normal.
13. Do not drop or hit the LCD panel with hard objects, as it may cause permanent damage
to the unit. If you come into contact with any spilled LCD fluid, wash and clean affected
areas with plenty of water and soap and seek medical attention immediately.
14. Refer to authorized dealers or the distributor in your country, if you have any queries
about the product.
ZE-MU620IR Manual D+E.ai 14 12.10.2007 12:06:13 Uhr

15
ENGLISH
4
Taking care of you display
CAUTION! The material of display area is made of glass with a protector film attached on it. Do not
use hard or sharp objects to strike or scratch the surface of the display area, as such actions may result
in picture distortion or scar.
Buttons on LCD monitor
1. POWER
2. SELECT
3. MENU
4. ∧,∨Button
1) Power On/Off Button
Press the power button; the LCD monitor will turn on. Press again; the monitor will turn off.
2) SELECT
Press the SELECT button to switch AVX1 and AVX2.
3) Menu Button
Press MENU to choose all sorts of adjustment functions.
Press “MENU” button continuously, the following functions can be selected in proper
sequence. Press “∨” and “∧” to change the value of the item you selected .
BRIGHTNESS: Adjust the brightness from -14(MIN) to +14(MAX).
CONTRAST: Adjust the contrast from -14(MIN) to +14(MAX).
➁ ➂➀ ➃
THE LCD MONITOR
BUTTONS ON LCD MONITOR
1. [POWER]-button
■Press the [POWER]-button to turn on the monitor.
■Press and hold the [POWER]-button to turn off the monitor.
2. [SELECT]-button
■Press the [SELECT]-button to switch between AV 1 and AV 2.
3. [MENU]-button
■Press the [MENU]-button to enter the main menu.
■Press the [MENU]-button to choose between the different menu items.
4. [] / []-buttons
■Press one of the [] / []-buttons to adjust the picture brightness.
■If you entered the main menu, you can press one of the [] / []-buttons to adjust the
value of the selected menu items.
ZE-MU620IR Manual D+E.ai 15 12.10.2007 12:06:14 Uhr

16
REMOTE CONTROL FUNCTIONS
1. [POWER]-button
Press the [POWER]-button to turn on and off the monitor.
2. [MENU +]-button
Press the [MENU +]-button to choose all sorts of adjustment functions in the upper
direction.
3. [MENU –]-button
Press the [MENU –]-button to choose all sorts of adjustment functions in the down
direction.
4. [MODE]-button
Press the [MODE]-button to choose between the video sources AV1 or AV2.
5. [–]-button
Press the [–]-button to decrease the value of the selected feature.
6. [+]-button
Press the [+]-button to increase the value of the selected feature.
1
2
3
56
4
ZE-MU620IR Manual D+E.ai 16 12.10.2007 12:06:14 Uhr

17
ENGLISH
MENU SETTINGS
BRIGHTNESS: Adjust the brightness from -14 to +14.
CONTRAST: Adjust the contrast from -14 to +14.
COLOR: Adjust the color from -14 to +14.
TINT: Adjust the tint from G1 to G14 and from R1 to R14.
RESET: Reset the menu to default value.
SCREEN MODE: Select the screen mode (WIDE/NORMAL).
SCREEN ROTATE: Switch the screen between normal or reverse.
IR TRANSMIT: Switch the IR channel between CHNA (2.3/2.8 MHz) and
CHNB (3.2/3.8 MHz).
SCREEN OFF: Switch the screen on or off.
CONTRAST
BRIGHTNESS
COLOR
TINT
SCREEN MODE
RESET
: Adjust
0
-3
+1
0
WIDE
�
: Select
SCREEN ROTAT E
SCREEN OFF
IR TRANSMIT CHNB
ZE-MU620IR Manual D+E.ai 17 12.10.2007 12:06:14 Uhr

18
CONNECTION LAYOUT
+12V (Yellow)
ACC (Red)
GND (Black)
Red
Black AV INPUT 1
AV INPUT 2
+12V (yellow)
■Connect to a permanent +12V (DC) power supply in the car.
ACC (red)
■If there is no ACC available, please connect ACC lead to the power supply with a
switch.
GND (black)
■Connect to chassis ground or negative terminal of the car battery.
AV1 and AV2
■RCA video input (Yellow): Connection available for external video source.
■RCA audio input R (Red): Connection available for external audio source.
■RCA audio input L (White): Connection available for external audio source.
ZE-MU620IR Manual D+E.ai 18 12.10.2007 12:06:15 Uhr

19
ENGLISH
TROUBLESHOOTING
Problem: Cause:Remedy:
No picture and sound
when the monitor is
turned on.
1. The power wire
connection is wrong or
the fuse is blown.
2. The system cable is not
in the right position.
1. Check the power wire
and replace the fuse.
2. Check the system cable
or replace it with a new
one.
Blurry picture on the
screen.
1. Electrical interference.
(e.g. high voltage wire,
transformer station
or aircraft, etc...).
1. The picture quality will
improve, when monitor
moves away from the
source of interference.
No function of the
remote control.
1. The remote control
battery is drained.
2. The remote control is
damaged.
1. Change the battery
against a new one.
2. Contact your dealer for a
new remote control.
The picture is too dark. 1. The unit is used in low
temperature area.
2. The brightness is set too
low.
1. The effect is typical of
the LCD operating at
low temperatures. The
picture is gradually
restored when the
temperature of the unit
and the surrounding rises.
2. Adjust the brightness.
ZE-MU620IR Manual D+E.ai 19 12.10.2007 12:06:15 Uhr

20
SPECIFICATIONS
Power Source: 10.5 - 16V (DC)
Operating Voltage: 12V (DC)
Operating Current: < 1A (typical)
IR Transmit Frequencies: CHNA 2.3/2.8 MHz
CHNA 3.3/3.8 MHz
Operating Temperature: -20°C to +70°C
Storage Temperature: -30°C to 80°C
Dimensions (WxHxD): 160 x 114 x 28 mm
If at any time in the future you should need to dispose this product
please note that waste electrical products should not be disposed of
with household waste. Please recycle where facilities exist. Check with
your Local Authority or retailer for recycling advice. (Waste Electrical and
Electronic Equipment Directive)
■Specification and design of this model is necessarily subject to
changes without notice.
ZE-MU620IR Manual D+E.ai 20 12.10.2007 12:06:16 Uhr
Table of contents
Languages:
Other ZENEC Monitor manuals

ZENEC
ZENEC ZEM-W700U User manual

ZENEC
ZENEC ZE-MC292 User manual

ZENEC
ZENEC ZEM-1040RM User manual

ZENEC
ZENEC ZEM-W1001RM User manual

ZENEC
ZENEC ZE-MC172 User manual

ZENEC
ZENEC ZEM-560U User manual

ZENEC
ZENEC Z-R1030 User manual

ZENEC
ZENEC ZE-MR1502 User manual

ZENEC
ZENEC ZE-MU62D User manual

ZENEC
ZENEC ZEM-W702U User manual

ZENEC
ZENEC ZEM-W652U User manual

ZENEC
ZENEC ZEM-W702RM User manual

ZENEC
ZENEC ZEM-W703MRM User manual

ZENEC
ZENEC ZEM-W700RM User manual

ZENEC
ZENEC ZEM-W1501RM User manual

ZENEC
ZENEC ZEM-W702UIR User manual

ZENEC
ZENEC ZEM-W701USM User manual

ZENEC
ZENEC ZEM-W700DMM User manual

ZENEC
ZENEC ZEM-W701RM User manual

ZENEC
ZENEC ZE-MR1502 - V1.01 User manual