Zero 11X User manual

12

1 21 2
3
2.lift up the main rod
1.Unlock the clamp
3.Lock the clamp

Step 1: power on
Step 3: put down the main rod
Step 2: unlock the clamp

Press power key until P12 shows up, then press MODE key to lock the option. Use power key to less the speed
and MODE key to increase the speed from 1 to 5. Bigger number, bigger start up strength.

72V
26A
2A

Brake Cable
than
resume normal value.
When
just
Brake Cable

If the main rod shakes during the running, please tighten the nuts for clamp and secure it.
If the main rod shakes during the running, please tighten the nuts for clamp and secure it.