Zeversolar Evershine TLC User manual

Grid
Evershine TLC Eversol TLC Zverlution Pro 33K
Code Setup Guide- Three Phase Inverter

Grid_Code_3_Phase_Inv_Rev1_20160510 1
Three Phase Inverter
Grid Code Setup Guide
Zeversolar Contact Details
Karlos Silva – Technical Sales Manager – Europe
Address: Luxemburger Str.59, 50674, Cologne, Germany
Email: [e-mail]
Phone: [phone]
Revision
Date
Summary
Author
1
04-05-2016
Release
KS

Grid_Code_3_Phase_Inv_Rev1_20160510 2
Table of Contents
1Three Phase Inverter – Grid Code Set-Up................................................................................................................... 4
1.1 Introduction...................................................................................................................................................................... 4
1.2 Assumed Knowledge................................................................................................................................................... 4
1.3 IMPORTANT – CHECK GRID CODE SETTING DURING COMMISSIONING!............................................... 4
1.4 When is Changing the Grid Code Required........................................................................................................ 5
1.5 Hardware Requirements............................................................................................................................................ 5
1.6 Basic & Advanced Settings....................................................................................................................................... 5
1.7 Grid Code Set-Up........................................................................................................................................................... 6
1.8 Zeversolar Contact Details.......................................................................................................................................8

Grid_Code_3_Phase_Inv_Rev1_20160510 3

Grid_Code_3_Phase_Inv_Rev1_20160510 4
1Three Phase Inverter – Grid Code Set-Up
1.1 Introduction
This standard operating procedure (SOP) details the steps that are required to change the default grid
code setting of a Zeversolar three phase inverter.
1.2 Assumed Knowledge
This guide assumes the following:
A Zeversolar three phase inverter has been installed;
The installation manual has been read and fully understood.
1.3 IMPORTANT – CHECK GRID CODE SETTING DURING COMMISSIONING!
The grid code setting should be checked during the commissioning of a PV plant. It is essential to
ensure that the correct grid code/safety setting has been selected for the relevant region. Each
Zeversolar inverter is set to a default grid code which is based on the serial number suffix that can
be found on the label affixed to the inverter and its packaging, see Fehler! Verweisquelle konnte nicht
gefunden werden. below.
Figure 1 - Serial Number with UK Suffix
Inverters shipped to Europe have three distinct suffixes and as such the default grid code is set
accordingly, please see Table 1.
S/N Suffix
Default Grid Code
DE
VDE-AR-N-4105
UK
G83/2 or G59/3
NL
NEN 50438
Table 1 - Default Grid Code Settings
Therefore it is necessary to check the serial number suffix and ensure that the correct grid code is
set. For example, an inverter being installed in the UK may have the DE suffix, in this case the inverter
grid code should be changed from the “VDE-AR-N-4105” grid code to the relevant UK grid code “G83/2
or G59/3.”

Grid_Code_3_Phase_Inv_Rev1_20160510 5
1.4 When is Changing the Grid Code Required
As mentioned above it is necessary to change the grid code if the inverter is not installed in the region
to which the default grid code is set to. The grid code should also be changed if the inverter is installed
in the following countries:-
Austria, Belgium, France, Greece, Northern Ireland, Poland, Republic of Ireland, Switzerland,
Turkey.
Please note: please refer to the Certificate Overview available from the Zeversolar website to
determine for which regions the Zeversolar inverters are certified.
1.5 Hardware Requirements
Evershine TLC;
Eversol TLC;
Zeverlution Pro 33K.
1.6 Basic & Advanced Settings
This guide is intended for inverters that have both the “Basic” and “Advanced” settings which can be
selected from the front panel display. If the inverter does not have both menu items then the “Safety
Setting” can be accessed by simply selecting “Settings” on the “Menu” screen.

Grid_Code_3_Phase_Inv_Rev1_20160510 6
1.7 Grid Code Set-Up
It is necessary to ensure that the inverter has been isolated from the AC supply. To change the grid
code please follow the steps outlined in Table 2.
Steps
Images
1. Navigate to the “Menu” screen by
pressing the Enter button on the front
panel.
2. When then “Menu” screen is displayed,
highlight “Settings” and press the Enter
button.
3. On the “Settings” screen select
“Advanced Settings” and press the Enter
button.
4. On the “Password” screen enter “0512”
using the arrow keys to scroll through
the digits and the Enter button to move
to the next digit. Pressing Enter after the
last digit is entered will display the
“Advanced Setting” menu.
5. On the “Advanced Setting” screen
highlight and select “Safety Settings”
and press the Enter button.

Grid_Code_3_Phase_Inv_Rev1_20160510 7
6. On the “Safety” menu the grid code
shown as “Standard” will be the first
item highlighted.
7. To change the “Standard” use the arrow
keys to scroll through the list of grid
codes. When the correct grid code is
selected, press the enter button
repeatedly to scroll through to the end
of the parameter list.
8. When the entire parameter list has been
scrolled through the “Safety” screen
will display “Setting Successful!”. Press
ESC to return to the “Advanced Settings”
screen.
9. To confirm the safety setting change
navigate to the “Device Information”
screen and verify that the “Standard”
has been changed.
Table 2 – Grid Code Set-Up

Grid_Code_3_Phase_Inv_Rev1_20160510 8
1.8 Zeversolar Contact Details
Karlos Silva – Technical Sales Manager – Europe
Address: Luxemburger Str.59, 50674, Cologne, Germany
Email: [e-mail]
Phone: [phone]