ZKTeco LB330 User manual

LB330 Parking Barrier User Manual
P a g e | 1 Copyright© ZKTECO CO., LTD. All rights reserved.
Thank you for choosingour product. Please readthe instructions carefully
before operation. Follow these instructions to ensure that the product is
functioning properly. The images shown in this manual are for illustrative
purposesonly.
www.zkteco.com.
User Manual
LB330 ParkingBarrier
Date:June 2022
Doc Version: 1.0
English

LB330 Parking Barrier User Manual
P a g e | 2Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Copyright © 2022ZKTECO CO., LTD.All rights reserved.
Without the prior written consent of ZKTeco, no portion of this manual can be copied or
forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries
(hereinafter the"Company" or "ZKTeco").
Trademark
is a registered trademark of ZKTeco. Other trademarks involved in this manual
are owned by theirrespective owners.
Disclaimer
This manual contains information on the operation and maintenance of the ZKTeco
equipment. The copyright in all the documents, drawings, etc. in relation to the ZKTeco
supplied equipment vests in and is the property of ZKTeco. The contents hereof should not
be used or shared by the receiver with any third party without the express written
permissionofZKTeco.
The contents of this manual must be read as a whole before starting the operation and
maintenance of the supplied equipment. If any of the content(s) of the manual seems
unclear or incomplete, please contact ZKTeco before starting the operation and
maintenance ofthe said equipment.
It is an essential pre-requisite for the satisfactory operation and maintenance that the
operating and maintenance personnel are fully familiar with the design and that the said
personnel have received thorough training in operating and maintaining the
machine/unit/equipment. It is further essential for the safe operation of the
machine/unit/equipment that personnel have read, understood, and followed the safety
instructions contained in the manual.
In case of any conflict between terms and conditions of this manual and the contract
specifications, drawings, instruction sheets or any other contract-related documents, the
contract conditions/documents shall prevail. The contract specific conditions/documents
shall applyin priority.
ZKTeco offers no warranty, guarantee or representation regarding the completeness of any
information contained in this manual or anyof the amendments made thereto. ZKTeco does
not extend the warranty of any kind, including, without limitation, any warranty of design,
merchantability,or fitness for a particular purpose.

LB330 Parking Barrier User Manual
P a g e | 3Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ZKTeco does not assume responsibility for any errors or omissions in the information or
documents which are referenced by or linked to this manual. The entire risk asto the results
and performanceobtained from using the information is assumed by the user.
ZKTeco in no event shall be liable to the user or any third party for any incidental,
consequential, indirect, special, or exemplary damages, including, without limitation, loss of
business, loss of profits, business interruption, loss of business information or any pecuniary
loss, arising out of, in connection with, or relating to the use of the information contained in
or referenced by this manual, even if ZKTeco has been advised of the possibility of such
damages.
This manual and the information contained therein may include technical, other
inaccuracies or typographical errors. ZKTeco periodically changes the information herein
which will be incorporated into new additions/amendments to the manual. ZKTeco reserves
the right to add, delete, amend, or modify the information contained in the manual from
time to time in the form of circulars, letters, notes, etc. for better operation and safety of the
machine/unit/equipment. The said additions or amendments are meant for improvement
/better operations of themachine/unit/equipment and such amendments shall not give any
right to claim anycompensation or damages under any circumstances.
ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment malfunctions
due to any non-compliance of the instructions contained in this manual (ii) in case of
operation of the machine/unit/equipment beyond the rate limits (iii) in case of operation of
the machine and equipment in conditions different from the prescribed conditions of the
manual.
The product will be updated from time to time without prior notice. The latest operation
procedures andrelevant documents are available on http://www.zkteco.com.
If there is anyissuerelatedto theproduct, please contactus.
ZKTeco Factory India
Address B-1, Khata No.31,Devasandra Industrial Estate,
Whitefield Main Road, Beside PhoenixMall,
Mahadevapura,Bengaluru, Karnataka.
Phone 080 6828 1342
For business-related queries, please write to us at india@zkteco.com.
To know more about our global branches, visit www.zkteco.com.

LB330 Parking Barrier User Manual
P a g e | 4Copyright©2022 ZKTECO CO., LTD. All rights reserved.
About the Company
manufacturers of RFID and Biometric (Fingerprint, Facial,
Finger-vein) readers. Product offerings include Access Control readers and panels, Near &
Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License
Plate Recognition (LPR) gate controllers and Consumer products including battery-operated
fingerprint and face-reader Door Locks. Our securitysolutions are multi-lingual and localized
in over 18 different languages. At the ZKTeco state-of-the-art 700,000 square foot ISO9001-
certified manufacturing facility, we control manufacturing, product design, component
assembly, and logistics/shipping, all under one roof.
The founders of ZKTeco have been determined for independent research and development
of biometric verification procedures and the productization of biometric verification SDK,
which was initially widely applied in PC security and identity authentication fields. With the
continuous enhancement of the development and plenty of market applications, the team
has gradually constructed an identity authentication ecosystem and smart security
ecosystem, which are based on biometric verification techniques. With years of experience
in the industrialization of biometric verifications, ZKTeco was officially established in 2007
and now has been one of the globally leading enterprises in the biometric verification
industry owning various patents and being selectedas the National High-tech Enterprise for
6 consecutive years. Its products are protected by intellectual property rights.
About the Manual
This manualintroducesthe operations of LB330 Parking Barrier.
All figures displayed are for illustration purposes only. Figures in this manual may not be
exactly consistent with the actual products.

LB330 Parking Barrier User Manual
P a g e | 5Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Document Conventions
Conventions used in this manual arelisted below:
GUI Conventions
For Device
Convention
Description
< >
Button or key names for devices. For example, press <OK>.
[ ]
Window names, menu items, data table, and field names are inside
square brackets. For example, pop upthe [New User] window.
/
Multi-level menus are separated by forwarding slashes. For example,
[File/Create/Folder].
Symbols
Convention
Description
This impliesaboutthe notice or pays attention to, in the manual.
The general information which helps in performing the
operationsfaster.
Theinformationwhichis significant.
Care taken to avoid danger ormistakes.
The statementor eventthat warns of somethingor that serves
as a cautionary example.

LB330 Parking Barrier User Manual
P a g e | 6Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Table of Contents
1OVERVIEW........................................................................................................................... 8
2FEATURES AND FUNCTIONALITIES................................................................................... 8
3APPEARANCE AND DIMENSIONS...................................................................................... 9
4SPECIFICATIONS...............................................................................................................10
5INSTALLATION PROCEDURE............................................................................................11
INSTALLATION PRECAUTIONS ..................................................................................................11
TOOLS PREPARATION.............................................................................................................. 11
INSTALLATION OF THE BASE AND THE CASING..........................................................................12
BOOM ARM INSTALLATION......................................................................................................13
5.4.1 BOOM ARM INSTALLATION PROCEDURE..............................................................................................13
6MAIN CONTROLBOARD INSTRUCTIONS ........................................................................14
CONTROL BOARD EXTERNAL PRODUCT REQUIREMENT.............................................................14
MAIN BOARD WIRING DIAGRAM..............................................................................................14
MAIN CONTROL BOARD OPERATION........................................................................................15
6.3.1 SELF-INSPECTION LEARNINGSWITCH BARRIERLIMIT METHOD:.........................................................15
6.3.2 OPERATIONSTEPS OF THE MAIN BOARD BUTTONS:...........................................................................15
PARAMETER SETTINGS DESCRIPTION .......................................................................................16
REMOTE CONTROL PAIRING AND UNPAIRING...........................................................................19
6.5.1 REMOTE CONTROL PAIRING:..................................................................................................................19
6.5.2 DELETE REMOTE CONTROL PAIRING:....................................................................................................19
RESET .....................................................................................................................................20
7TROUBLESHOOTING ........................................................................................................20
8SAFETY PRECAUTIONS.....................................................................................................21

LB330 Parking Barrier User Manual
P a g e | 8Copyright©2022 ZKTECO CO., LTD. All rights reserved.
1Overview
The LB330 is intended for use in small parking spaces, such as those for two-wheelers and
small cars. It is a low-cost barrier with a high-performance DC brushless motor and two
arm lengths of 1.5 and 2 meters, as well as a spherical type of boom arm. It also features
inbuilt LED lights mostly night lights that turn on when there is a dark light condition; this
is controlled by a sensor that detects low light. It has two remote controllers and is
compatible with LPR cameras, UHF readers, and biometric devices.
2Features and Functionalities
1. The fastest operating speed is 5s, the speed can be adjusted according to different boom
arm lengths.
2. Digital controlmonitoring supports delay automatic close functions.
3. High safety, support power off manually rise boom arm, anti-smashfunctions.
4. The position of the angle of rising/fall can be adjusted, and the digital encoder is adopted
to limit the position automatically, replacing the traditional limit structure, and the
position control is accurate.
5. The barrier boom will rebound when itis blocked.
6. Invertibility in left and right direction, simple and compact transmission mechanism, easy
to installon site.

LB330 Parking Barrier User Manual
P a g e | 9 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
3Appearance and Dimensions

LB330 Parking Barrier User Manual
P a g e | 10 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
4Specifications
Model
LB330
Operating Speed
3s to 5s (Configurable)
Boom Length
2m
Boom Type
Round Boomwith LED Light
ChassisDimensions (L*W*H)
140*110*812 (mm)
Weight
12Kg
MotorType
24V DC Brushless Motor
OutputPower
40W
Output Current
2A
Working Voltage
DC24V
PowerSupply
AC 220V, 50Hz
Operating Temperature
-30°C to +60°C
MCBF
1 million times
Remote Control Distance
30m
Operating Humidity
90%RH

LB330 Parking Barrier User Manual
P a g e | 11 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
5Installation Procedure
Installation Precautions
1. Install the parking barrier on a flat surface. A cement foundation is required before
installationif the ground isnot solid and flat.
2. It is possible to reduce the length of the boom, but it cannot be increased. After the boom
has been cut, it is important to set the spring balance again to achieve a new balance. The
bottom of the spring contains two plasticnuts designed to adjust the newbalance.
3. When the barrieris powered on, do not change thewire connection inside.
4. Connect the GND to the cabinet to ensureprotection.
Tools Preparation
Make sure you have all the tools that you will need to do the job. The following is a list of
tools that are required:
ImpactDrill
Adjustable Wrench
Hammer
Needle-nosePliers
Hexagon Wrench (Allen Key)
Screwdriver,etc.

LB330 Parking Barrier User Manual
P a g e | 12 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Installation of the Base and the Casing
1. Remove the four screws from the casing and the base as shown inthe illustration.
2. Make sure the wireslot in the centre of the base is pre-opened.
3. The base has a downward opening. Fix the location with the expansion screw M10 x 120
after identifyingit.
4. Place the casing on the base and install and tighten the four screws.
The barrier's base is shown in the figure below:

LB330 Parking Barrier User Manual
P a g e | 13 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Boom Arm Installation
5.4.1 Boom Arm Installation Procedure
1. Install the handlebar head: Make sure the flat key on the main shaft is aligned with the key
notch on the handlebar head, then gently tap the handlebar head in place. Please see the
figurebelow.
2. Install the centre screw and tighten it.
3. Attach the boom arm to the boom holder's head.
4. Install the remaining two screws and tighten them.
5. Connect the LEDlight's power cord.

LB330 Parking Barrier User Manual
P a g e | 14 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
6Main Control Board Instructions
1. Before you begin wiring, make sure the powersupply is turnedoff.
2. Make sure that the terminals are securely fastened and that the wiring is secure.
Control Board External Product Requirement
External product requirements for the controlboard are:
Power supply -24V/4 to 10 A;
Motor type: 24DC Brushless motor.
Vehicle detectoror 12V radar groundsensor.
Main Board Wiring Diagram
Note: Network cables must not be connected to any of the control board's external signal
lines. Although the network wires have no connectivity issues, they are easily broken after
numerous tosses. To reduce the issuescaused by linefaults, it is advisable to use BVRlines.

LB330 Parking Barrier User Manual
P a g e | 15 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Main control Board Operation
6.3.1 Self-inspection Learning Switch Barrier Limit Method:
1. Long press the "key" of the control board for 2 seconds after it begins normally ("190"
is displayed). The main board display value decreases as the barrier moves in the
direction of closing the gate. The main board display returns to "190" when the motor
reaches the closing limit, and the closing self-checkis completed.
2. Press and hold the "On" button on the main board for 2 seconds after the shutdown
self-check is done. The display value on the main board increases as the gate moves in
the gate opening direction. The main board buzzer beeps for a long time when the
motor reaches its open limit. The self-check for the opening is now complete, and the
gate can be used normally.
6.3.2 Operation Steps ofthe Main Board Buttons:
1. Press and hold themain board menu buttonuntil L-1 is appearing.
2. To select the menu directory, press the "On" or "Close" key on the mainboard. If you
need to enterthis directory, press the "Menu" key on the mainboard once.
3. if you need to modify a catalogue parameter, after accessing the menu catalogue, hit
the "No" and "Off"keys to increase or decrease this menu parameter, once the
alteration is complete, if you need to change other catalogue parameters, click the
"Menu" key once to return to the previous menu catalogue. Return to the main menu
and proceed with the second step. If you do not alter any other settings, you may save
and exit themenu by pressing the "Confirm" keyon the mainboard.

LB330 Parking Barrier User Manual
P a g e | 16 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Parameter Settings Description
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- -
-
-

LB330 Parking Barrier User Manual
P a g e | 17 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-

LB330 Parking Barrier User Manual
P a g e | 18 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
-
-
-
-
-
-
-
-
-
-
-
-

LB330 Parking Barrier User Manual
P a g e | 19 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
-
-
-
-
-
Remote Control Pairing and Unpairing
6.5.1 Remote Control Pairing:
1. Long press Menu , then Long press the "Menu" button to enter the menu,
select the L-F option, click the "Menu" button to display 000, and then enter the
remote-control setting.
2. Press the remote control "Any key" and the main board will beep once, and the
display will change to "L-F" to match the remote control successfully.
3. Press the "Confirm" button to save, and the configuration is complete.
6.5.2 Delete Remote Control Pairing:
1. Long press the "Menu" button to enter the menu, select the L-F option, click the
"Menu" button to display 000, and then enter the remote control setting.
2. Set the parameter to 253. At this time, the main board display will automatically
return to the L-Finterface. At this time, theremote control is successfullycleared.

LB330 Parking Barrier User Manual
P a g e | 20 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Reset
1. Long press the "Confirm" button on the main board and wait for the buzzer to beep
three times before releasing it. All parameters will be reset to their factory default
values at thistime.
7Troubleshooting
N0
FailureDescription
AnalysisandSolution
1
If thereis a powerfailure.
To open the barrier, we can manually lift the gate lever
gently.
2
The automatic function cannot
liftthegatelever.
To open the gate, turn off the electricity and slowly lift
the boom armas described in the previous paragraph.
3
The self-inspection is
unsuccessful and the barriers
arenot operatingnormally.
Check to see if the L-d motor's left and right rotation
modes are compatible with the current motor. After
changing the parameters, you can restart the main
boardtore-checktheself-check.
4
The barrier rod is not in the
verticalor horizontal position.
Adjustthe parameters of the main board menu L-9 or L-
6 (please refer to the parameter table for menu
functions).
5
The barrier rod is not in the
verticalor horizontal position
Set the L-18 parameter of the main board to 1, if the
relay will act once when it is opened (or closed), it
meansithasbeenopened(orclosed).
If the motor stops moving while the barrier is in
position, it indicates it is in place. If the barrier is still in
place and the motor is still operating, you must modify
theL-6orL-9parameter.
6
The rebound function fails when
thereisresistance.
Check if the L-C parameter will rebound in the face of
resistance (the main board parameter is greater than
100,andthereboundfunctionwillfail).
The mainboard must be opened to the position and
closed to the position twice to run, and the rebound
function will only activate when it detects
resistance after the mainboard self-check is successful
or afterenteringandexiting the menu.
7
During regular functioning, the
barriers unexpectedly reverse
theirorientation.
Increase the value of the L-C rebound function
parameterwhenitencountersresistance.
Table of contents
Other ZKTeco Automatic Barrier manuals

ZKTeco
ZKTeco ProEntrance Series User manual

ZKTeco
ZKTeco BG500 Series User manual

ZKTeco
ZKTeco BG1045L-LED User manual

ZKTeco
ZKTeco CMP-200 Series User manual

ZKTeco
ZKTeco PB3000 Series User manual

ZKTeco
ZKTeco BGM1000 Series User manual

ZKTeco
ZKTeco FBL200 User manual

ZKTeco
ZKTeco BG1000 Series User manual

ZKTeco
ZKTeco SBTL300 Series User manual

ZKTeco
ZKTeco SBTL2000 User manual
Popular Automatic Barrier manuals by other brands

Leyman
Leyman TSG Hide-A-Way installation manual

Erreka
Erreka ULTRA Series Quick installation and programming guide

Cardin
Cardin ELDOM6 Series instruction manual

Holland
Holland TG Series installation manual

vds
vds BERTA M Technical installation manual

Gerreka
Gerreka ULTRA Quick installation and programming guide