Zoom Q2n-4K Mounting instructions

Q2n-4K Firmware Update Guide
Copyright (C) 2020 ZOOM Corporation. All Rights Reserved.
•Copying or reprinting this manual in part or in whole without permission is prohibited.
•Windows® is a trademark or registered trademark of Microsoft® Corporation.
•Mac® is a trademark or registered trademark of Apple Inc.
•Other product names, registered trademarks and company names in this document are the property of their
respective companies.
•All trademarks and registered trademarks in this document are for identification purposes only and are not
intended to infringe on the copyrights of their respective owners.
•Proper display is not possible on grayscale devices.
•The illustrations in these instructions might differ from actual screens.
● ZOOM Corporation will bear no responsibility for any losses or third-party claims
resulting from the use of this software. Moreover, distribution, sale, leasing, rental,
alteration, and reverse engineering without permission of this software are
prohibited. The specifications of this software and the contents of this document
could be changed without notice in the future.

2
This guide explains updating the firmware to version 1.10 as an example.
1. Download the firmware update file.
Download the ZIP file that contains the firmware update file from the Q2n-4K download page.

3
On Windows
2. Extract the ZIP file.
Select the folder that contains the downloaded ZIP file. Click ①“Compressed Folder Tools” followed by ②“Extract
all”. This extracts the ZIP file.
①
②

4
3. Copy the firmware update file to a microSD card.
Copy the “Q2N4K_FW.BIN” file to a microSD card.
Firmware update file
Copy the firmware update
file to a microSD card.

5
On macOS
2. Extract the file.
After downloading, open the ①“Downloads” folder, which appears at the right end of the Dock by default.
Then, click ②. Downloaded files will be shown.
3. Copy the firmware update file to a microSD card.
Copy the “Q2N4K_FW.BIN” file to a microSD card.
①
②
Firmware update file
Copy the firmware update
file to a microSD card.

6
The following procedures are the same on both Windows and macOS.
4. Install new batteries in the Q2n-4K or connect an AC adapter.
NOTE
Executing a firmware update is not possible if the remaining battery power is low.
5. Insert the microSD card into the Q2n-4K microSD card slot.
microSD card
6. While pressing , press and hold to turn the power on.
This opens an update confirmation screen.

7
7. Press to select “YES ●”.
This opens a final confirmation screen.
8. Press to select “YES ●”.
After updating, the Completion Screen opens.
NOTE
During the firmware update, do not turn the power off or remove the microSD card.
9. Press and hold to turn the power off.
NOTE
In the unlikely event that a firmware update should fail while in progress, conduct the procedures from the beginning to
update the firmware again.
© 2020 ZOOM CORPORATION Z2I-4186-01