Zte Axon 40 Lite User manual

1
ZTE 8046
(ZTE Axon 40 Lite)
Quick Start Guide

2
LEGAL INFORMATION
Copyright © 2022 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted,
reproduced, translated or used in any form or by
any means, electronic or mechanical, including
photocopying and microfilm, without the prior
written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make
modifications on print errors or update
specifications in this guide without prior notice.
We offer self-service for our smart terminal device
users. Please visit the ZTE official website (at
www.ztedevices.mx) for more information on user
manual, self-service and supported product
models. Information on the website takes
precedence.
Disclaimer
ZTE Corporation expressly disclaims any liability
for faults and damages caused by unauthorized
modifications of the software.
Images and screenshots used in this guide may
differ from the actual product. Content in this
guide may differ from the actual product or
software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE
Corporation.
Android™ is a trademark of Google LLC.
The Bluetooth ® word mark and logos are
registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by ZTE
Corporation is under license.
microSDXC Logo is a trademark of
SD-3C, LLC.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS, Inc. (for
companies headquartered in the
U.S./Japan/Taiwan) or under license from DTS

3
Licensing Limited (for all other companies). DTS,
and the DTS logo are registered trademarks or
trademarks of DTS, Inc. in the United States and
other countries. © 2021 DTS, Inc. ALL RIGHTS
RESERVED.
Other trademarks and trade names are those of
their respective owners.

4
Getting to Know Your Phone
Your phone supports 2.4 GHz and 5 GHz Wi-Fi.
Front camera
Touch
screen
Earpiece
Volume key
Power key/
Fingerprint
sensor
Charging/USB
Type-C jack
Headset
jack
Back
cameras
Speaker
Indicator
light
nano-SIM/
microSDXC
card tray
Proximity
& light
sensor
Flash

5
Setting Up Your Phone
The nano-SIM card can be installed or removed
while the phone is turned on.
WARNING!
To avoid damage to the phone, do not use any
other kind of SIM cards, or any non-standard
nano-SIM card cut from a SIM card. You can get a
standard nano-SIM card from your service
provider.
1. Insert the tip of the tray eject tool into the hole
on the card tray.
NOTE:
Please use the tray eject tool included in the box.
Otherwise the card tray may not be ejected.
CAUTION:
Never replace the included tray eject tool with
sharp objects. Ensure that the tray eject tool is
perpendicular to the hole. Otherwise, the phone
may be damaged.

6
2. Pull out the card tray and place the nano-SIM
card and the microSDXC card (optional) on the
tray, as shown. Carefully slide the tray back
into place.
Charging the Phone
Your phone’s battery should have enough power
for the phone to turn on, find a signal, and make a
few calls. You should fully charge the battery as
soon as possible.
WARNING!
Use only ZTE-approved chargers and USB Type-C
cables. The use of unapproved accessories could
damage your phone or cause the battery to explode.
WARNING!
Do not remove the back cover. The battery is not
removable. Removal may cause fire or explosion.
1. Connect the adapter to the charging jack.
nano-SI
M card
microSDXC
card

7
2. Connect the charger to a standard AC power
outlet.
3. Disconnect the charger when the battery is
fully charged.
NOTE:
If the battery is extremely low, you may be unable
to power on the phone even when it is being
charged. In this case, try again after charging the
phone for at least 20 minutes. Contact the
customer service if you still cannot power on the
phone after prolonged charging.
Powering On/Off Your Phone
Make sure the battery is charged before powering
on.
Press and hold the Power key to turn on your
phone.
To power off, press and hold the Power key to
open the options menu, and touch >.
NOTE:
If the screen freezes or takes too long to respond,
try pressing and holding the Power key for over 10
seconds to restart the phone.

8
FM Radio
Scanning for Channels
1. Plug in a wired headset and open FM Radio.
2. Touch > Scan > OK. Your phone scans for
all available channels and saves them to the
channel list.
Listening to FM Radio
1. Open FM Radio while the headset is
connected.
2. Touch > All channels and select a channel.
You can also drag the red needle along the
frequency panel or touch or to switch to
other channels, or touch or to adjust the
current channel frequency.
NOTES:
Touch to add the channel to favorites.
Touch to listen to the radio through the
phone speaker.
The FM radio feature does not require an
Internet connection.

9
Product Safety Information
Don’t make or receive phone calls while
driving. Never text while driving.
Keep your phone at least 10 mm away
from your body while making calls.
Small parts may cause choking.
Your phone can produce a loud sound.
To prevent possible hearing damage, do
not listen at high volume levels for long
periods. Exercise caution when holding
your phone near your ear while the
loudspeaker is in use.
Avoid contact with anything magnetic.
Keep away from pacemakers and other
electronic medical devices.
Turn off when asked to in hospitals and
medical facilities.
Turn off when told to on aircraft and at
airports.
Turn off when near explosive materials or
liquids.
Don’t use at gas stations.
Your phone may produce a bright or
flashing light.
Don’t dispose of your phone in fire.
Avoid extreme temperatures.
Avoid contact with liquids. Keep your
phone dry.

10
Do not attempt to disassemble your
phone.
Only use approved accessories.
For pluggable equipment, the
socket-outlet shall be installed near the
equipment and shall be easily accessible.
Don’t rely on your phone as a primary
device for emergency communications.
FCC RF Exposure Information (SAR)
This phone is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission of the United
States.
During SAR testing, this device was set to
transmit at its highest certified power level in all
tested frequency bands, and placed in positions
that simulate RF exposure in usage against the
head with no separation, and near the body with
the separation of 10 mm. Although the SAR is
determined at the highest certified power level,
the actual SAR level of the device while operating
can be well below the maximum value. This is
because the phone is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the
closer you are to a wireless base station antenna,
the lower the power output.
The exposure standard for wireless devices
employing a unit of measurement is known as the
Specific Absorption Rate, or SAR. The SAR limit
set by the FCC is 1.6 W/kg.
This device is complied with SAR for general
population/uncontrolled exposure limits in

11
ANSI/IEEE C95.1-1992 and had been tested in
accordance with the measurement methods and
procedures specified in IEEE1528.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this
model phone is on file with the FCC and can be
found under the Display Grant section of
www.fcc.gov/oet/ea/fccid after searching on FCC
ID: SRQ-ZTE8046. The FCC ID also can be found
on the device when you open Settings > About
phone > FCC ID.
For this device, the highest reported SAR value
for usage against the head is 0.98 W/kg, and for
usage near the body is 1.03 W/kg.
While there may be differences between the SAR
levels of various phones and at various positions,
they all meet the government requirements.
SAR compliance for body-worn operation is based
on a separation distance of 10 mm between the
unit and the human body. Carry this device at
least 10 mm away from your body to ensure RF
exposure level compliant or lower to the reported
level. To support body-worn operation, choose the
belt clips or holsters, which do not contain
metallic components, to maintain a separation of
10 mm between this device and your body.
RF exposure compliance with any body-worn
accessory, which contains metal, was not tested
and certified, and using such body-worn
accessory should be avoided.

12
FCC Regulations
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
CAUTION:
Changes or modifications not expressly approved
by the manufacturer could void the user’s
authority to operate the equipment.

13
The antenna(s) used for this transmitter must not
be co-located or operating in conjunction with any
other antenna or transmitter.