Zte MF190 User manual

1
Invitel Manager
User Manual

Edition 1st edition, March 2011
Copyright © ZTE Corporation 2011
2
All Rights Reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any
form or by any means, electronic or mechanical, including photocopying and microfilm,
without the prior written permission of ZTE Corporation.
NOTE:
The manual is published by ZTE Corporation. We reserve the right
to make modifications on print errors or update specifications without prior notice.

1. Installation of the ZTE MF190 HSPA modem ...................................................... 6
Uninstalling the software. ....................................................................................11
Installation.............................................................................................................. 10
3
Content
2. Introduction of the modem ................................................................................... 8
Introduction .............................................................................................................. 8
Warning and notice .................................................................................................. 8
Modem..................................................................................................................... 8
In aircraft .................................................................................................................. 9
Applicability scope ................................................................................................... 9
System requirements ............................................................................................... 9
Functions ................................................................................................................. 9
3. Using the Invitel Net’n’Go Manager with Windows .......................................... 10
Installation of the software.................................................................................. 10
Launch the Invitel Net’n’Go Manager software .................................................. 10
4. Functions & Operation........................................................................................ 12
Description of the Invitel Net’n’Go Manager GUI ................................................... 12
Interface introduction.......................................................................................... 12
Shortcut icons..................................................................................................... 12
Status Information .............................................................................................. 12
Status Information ............................................................................................. 12
5. Internet Services.................................................................................................. 14
Connecting the Internet.......................................................................................... 14
6. Network settings.................................................................................................. 15
Selecting a Network Type ...................................................................................... 15
Selecting the Network............................................................................................ 15

4
7. Connection settings ............................................................................................ 16
Creating a new Configuration ................................................................................ 16
Editing a Configuration........................................................................................... 16
Deleting a Configuration ........................................................................................ 17
Setting a Configuration as Default ......................................................................... 17
8. Data Record ......................................................................................................... 18
Viewing the Data Record ....................................................................................... 18
Resetting the Data Record..................................................................................... 18
9. SMS-services ....................................................................................................... 19
Creating and Sending SMS ................................................................................... 19
Inbox ...................................................................................................................... 19
Reading SMS ..................................................................................................... 20
Sentbox ................................................................................................................. 20
Draftbox, Important, Deleted and Report ............................................................... 21
SMS-settings.......................................................................................................... 21
SMS Alerts Settings............................................................................................ 21
Setting the SMS Center Number and SMS Validity Period ................................ 22
Setting Default Save Location for New SMS...................................................... 22
Setting State Report........................................................................................... 22
10. Phonebook ......................................................................................................... 23
Phonebook Management....................................................................................... 23
Creating a new Contact...................................................................................... 23
Searching a Contact........................................................................................... 23
Viewing, Modifying, Moving, Deleting a Contact ................................................ 23
11. Settings and Information Query ....................................................................... 25
Change the Language........................................................................................ 25

5
PIN Operations .......................................................................................................... 25
Enabling/Disabling the PIN Verification .............................................................. 25
Modifying the PIN Code ..................................................................................... 25
Entering the PIN Code ....................................................................................... 26
Unlocking the PIN............................................................................................... 26
Auto Start of Invitel Net’n’Go Manager...................................................................... 26
Auto Connect to the Internet:..................................................................................... 26
Saving User Data ...................................................................................................... 26
Viewing Diagnostics Information ............................................................................... 27
Saving the Diagnostics Information........................................................................... 27
Updating the Invitel Net’n’Go Manager...................................................................... 27
Setting the period of new software checking and update................................... 27
Server data......................................................................................................... 27
Update now ....................................................................................................... 28
12. FAQ and Answers.............................................................................................. 29
13. Acronyms and Abbreviations........................................................................... 32

towards the locking catches on the sides of the modem and push the front cover into his place.
Put the front cover of the modem flatly upon the body of the modem. Direct the front cover
Insert your microSD card into the microSD card slot, shown as the following picture.
then push SIM card as far as possible, shown as the following picture.
Insert the SIM card with the metal contact area facing downwards into the SIM card slot and
and remove. Do not open the front cover rudely so as avoid the damage of the front cover.
Put finger on the bottom finger grip, and then lift the front cover of the modem to release
Connect to the Internet in four easy steps
Installation of the ZTE MF190 HSUPA modem
6
1.
1.
2.
3.

Software installation starts automatically.
Plug the modem into a free USB slot of your laptop or PC.
7
4.

The ZTE MF190 HSPA modem is a type of multi-mode 3G modem, suitable for HSPA/
communication at any moment everywhere.
service and will help you break away from the limit of time and location, and realize wireless
interface to laptop and desktop PC. mobile networks, It can help you carry out SMS or data
WCDMA/ EDGE/ GPRS/ GSM networks. It adopts a USB interface which provides an easy
8
Introduction of the modem2.
Introduction
To guarantee that the modem is always in its best condition, please read this manual carefully
and keep it for further use.
The pictures, symbols and contents in this manual are just for your reference. They might not
be completely identical with your modem. We operate a policy of continuous development
and we reserve the right to update the technical specifications in this document at any time
without prior notice.
Warning and notice
To the owner.
Some electronic devices are susceptible to electromagnetic interference sent by the•
modem if inadequately shielded, such as electronic systems of vehicles. Please consult
the manufacturer of the device before using the modem if necessary.
Operating of laptop and desktop PC and modem may interfere with medical devices•
like hearing aids and pacemakers. Please always keep the modem more than 20
centimeters away from such medical devices when they are turned on. Turn the modem
off if necessary. Consult a physician or the manufacturer of the medical device before
using the modem.
Be aware of the usage limitation when using a modem at places such as oil warehouses•
or chemical factories where explosive gases or explosive products are being processed.
Turn off your modem if required.
Don’t touch the inner antenna area if not necessary. Otherwise it will affect your•
modem’s performance.
Store the modem out of the reach of little children. The modem may cause injury if used•
as a toy.
Modem
Please use original accessories or accessories that are authorized. Using any•
unauthorized accessories may affect your modem’s performance and violate related
national regulations about telecom terminals.
Avoid using the modem near metallic structure devices or establishments that can emit•
electromagnetic waves. Otherwise it may influence receiving signals.
The modem is non-waterproof, please keep it dry and store in a shady and cool place.•
Don’t use the modem immediately after a sudden temperature change. In such case it•
might produce dew inside and outside of the modem, so don’t use it until it becomes dry.
Handle the USB modem with care. Don’t drop, blend, knock or threat it harshly to avoid•
damage to the unit.

The ZTE MF190 modem supports the present mainstream types of laptops and desktop PCs,
Windows XP (SP2/3)/Vista (SP1)
9
Do not dismantle the modem in any case. Only a professional or qualified maintainer•
can undertake repair work warrantly.
In aircraft
Please power off the modem before the airplane takes off. In order to protect airplane’s•
communication system from interference, it is never allowed to use the modem when in
flight. Using it before the plane is taking off should get aircrew’s permission according to
safety regulations.
Applicability scope
such as HP, IBM, Toshiba, Lenovo, Dell, Asus, etc. as well as all Apple Computers running on
Mac OS X 10.4 or later.
System requirements
Windows Operating System:
Windows 7
NOTE:
If the OS is Microsoft Vista, please update to SP1 before attempting to use the modem.
Hardware configuration (Recommended):
CPU: 500 MHz Pentium or above
Hard Disk: 30 MB or above
RAM: 128 MB or above
Apple Operating System:
Apple OS X 10.4 or later
Hardware configuration (Recommended):
CPU: PowerPC or Intel
Processor: 500 MHz or above
Hard Disk: 30 MB or above
RAM: 128 MB or above
The performance of the modem may be negatively influenced if configuration is below the
recommended requirements.
Functions
Functions: SMS service, data service, applied management, data concurrence, support
MicroSD card, etc.

“Uninstall”
Installation
10
Using the Invitel Net’n’Go Manager with Windows3.
Installation of the software
Plug the stick into a free USB port on your PC.•
After a few seconds, the installation interface will be shown if the laptop or desktop PC•
supports automatic installation.
NOTE:
If the laptop or desktop PC doesn’t support automatic installation, start the installation
program by running the Install.exe which can be found at “My Computer / HSPA_MODEM”
and follow the system prompts to complete the software installation.
Click on the drop-down button to choose the setup language and click• “OK”.
Click• “Next” to continue.
Read the agreement carefully. If you agree, choose• “I accept the terms of the license
agreement”, and then click “Next”.
Select the folder that you want to install the software to. You can select a different•
location by pressing “Change” and navigating to the desired location. To continue click
“Next”.
Wait until the setup procedure is completed and click• “Finish” to end the installation.
NOTE:
If you have problems with installation after following the instructions above, please contact
the shop or ZTE.
After the installation, a “Invitel Net’n’Go Manager” program group will be created in the start-
menu, including “Invitel Net’n’Go Manager” and shortcuts. There will also be a
shortcut icon created on the desktop.
Launch the Invitel Net’n’Go Manager software
After the modem is correctly connected to the laptop or desktop, the “Invitel Net’n’Go
Manager” will start automatically.
In case it does not start, click the “Start > Programs > Invitel Net’n’Go Manager > Invitel
Net’n’Go Manager” shortcut on the laptop or desktop PC or double click the shortcut icon
to run the application software. After the modem is initialized, the standby icon
appears in the system tray and the modem can work properly. Double click on the icon to
open the main interface.

> "Uninstall" shortcut on the
Uninstalling the software
11
Close the application program before the software uninstalls.
Click the “Start > Programs >• Invitel Net’n’Go Manager
laptop or desktop PC and follow the system prompts to complete the uninstall of the
application software.
Click• “Yes” to confirm uninstall of the software.
Click• “Yes” according to the indication, then the system begins to uninstall programs.
Wait until the process is completed and click “Finish” to end the application software•
uninstall.

12
Functions & Operation4.
Description of the Invitel Net’n’Go Manager GUI
Interface introduction
Shortcut icons1.
The following table lists the shortcut icons provided by the Invitel Net’n’Go Manager.
Icon Description
Display the Connect interface. Connect to the Internet/
Disconnection.
Shows information about the current an past
connections. Query the statistics of the transferred data.
Display the Settings interface: Set normal relative
information for the modem.
Display the SMS interface
Display the Phonebook interface
Status2.
Information
The following table lists all the possible status information.
Status3.
Information Description
The icon indicates the network signal strength.There
are 6 stages from none to the strongest.
Display the profile of the current network.The icon indicates
the current network type, i.e.
HSPA, EDGE, or GPRS service.

Enter the MF190 HSPA modem software help.
Enter the MF190 HSPA modem software help.
Using the tray icons
13
Main menu button area
Click the arrow icon to popup the operation menu:
Log: Shows the records of software usage.
About: View the information about the application software and modem hardware
versions.
Help:
Language: Choose the language of the GUI
Exit: Close the software and stop the modem from working.
Right click the tray icon to popup the operation menu:
Log: Shows the records of software usage.
About: View the information about the application software and modem hardware
versions.
Help:
Language: Choose the language of the GUI
Exit: Close the software and stop the modem from working.

14
Internet Services5.
Connecting the Internet
After setting the network and connection profiles, you can access the network through the
Invitel Net&Go Manager. To access the Internet, do as follows:
Click1. .
Click the2. “Connect” button. The system will search for available networks
automatically. You can click the “Cancel” button at any time to cancel the connection
attempt.
Launch the browser on the PC or Notebook to access the internet.3.
When connected, the internet information area will show the amount of data transferred, the
elapsed connection time and start your default internet browser. Then you can access the
internet and receive emails etc. through the mobile network.
The “Connect” button will change to the “Disconnect” button. You can click the
“Disconnect” button at any time to stop the connection to the internet.

15
Network settings6.
You can set the network settings with Invitel Net’n’Go Manager.
Selecting a Network Type
You can select different network types to search and access the network.
NOTE:
Contact your network service provider for the network type and frequency band.
Choose1. Settings > Preference.
Select the corresponding network type.2.
- Automatic: The system selects the available network automatically.
- UMTS/HSPA Only: The system will only select a UMTS/HSPA network.
- GPRS/EDGE Only: The system will only select a GPRS/EDGE network.
Click3. Apply.
Selecting the Network
Click1. Selection.
Select2. Automatic, or Manual.
Automatic:
The system selects the network automatically based on the user’s selected rules and the
network status.
Manual:
The network is selected by users themselves.
Select1. Manual.
Click2. Search.
Select an operator name in the list.3.
Click4. Apply.

16
Connection settings7.
To ensure that the modem can connect to the Internet properly, you should configure the
connection information first. To display the Connection interface do as follows:
Click1. .
In the navigation tree, click2. Connection.
NOTE:
For details about setting the profile, contact your service provider.
Creating a new Configuration
Click1. Add to set the a new Configuration name, access number, user name,
password, Access Point Name (APN) and APN status
Click2. Advance tab to set the IP information, authentication protocol, Domain Name
Server (DNS) and PDP type
Click3. Apply to save the advanced settings and return to the Connection interface.
NOTE:
If network supports “Obtain PDP server address automatically”, the modem can obtain the
assigned IP information automatically. If network does not support it, you should input the
proper address manually. Please consult the network supplier of the SIM card for all above
information. The confi-guration information may vary due to the different network suppliers
and network types.
Editing a Configuration
Select a configuration in the1. Configuration name list.
Click2. Edit to modify the profile name, access number, user name, password, APN
name.
Click3. Advance tab to set the IP information, authentication protocol, DNS and PDP
type.
Click4. Apply to save the advanced settings and return to the Connection interface.

17
Deleting a Configuration
Select a configuration in the1. Configuration name list.
Click2. Delete and the Prompt dialog box is displayed.
Click3. OK to delete the setting; or click Cancel to cancel the deletion.
Setting a Configuration as Default
Select the configuration to be set as default in the1. Configuration name list.
Click2. Apply to set the selected Configuration as Default.

In order to delete all log information please select the “Clear” command.
18
Data Record8.
You can view related information for your internet operation, such as transfer information,
and data record. The transfer information includes transfer time, transfer rate, data stream
and statistics information. The data record includes start time, end time, duration, upload and
download.
NOTE:
The statistical data of the traffic is only for your reference. The actual traffic nformation is
accounted on the basis of the traffic data collected by the operator.
Viewing the Data Record
To view the Dtat Record, do as follows:
Click1. .
2. To display the requested information in the Data Record menu, select one of the follows:
Transfer Data: To view the duration of the actual connection, the last reset time, and
•
daily/monthly/yearly uploaded and downloaded data.
Data Record: You can review information about your internet activities, e.g: data•
transmission, information and data traffic. Within the data transmission information
you can find the date of transmission, transmission speed, the data stream and
statistical information. The data record includes the date of the beginning and end of
transmission, duration, uploaded and downloaded data.
Resetting the Data Record
To reset the Transfer Data, do as follows:
Click1. .
Click2. Reset in Transfer Data tab.
In the Confirm dialog box, click3. OK.
Click Cancel to return to the main interface of the Invitel Net’n’Go Manager.
To reset the Data Record, do as follows:
Click1. .
Select records to be deleted in the2. Data Record tab and click Delete.
3.
Click Cancel to return to the main interface of the Invitel Net’n’Go Manager.

19
SMS-services9.
You can send and receive SMS via the Invitel Net’n’Go Manager application if your network
provider supports that kind of services.
Creating and Sending SMS
With Invitel Net’n’Go Manager installed on your PC, you can send text messages to mobile
phones or other terminal devices that support the SMS function.
NOTE:
You can group send a message to up to 20 phone numbers. Each number should be
separated by ”;”.
Click1. to display the SMS interface.
Click2. New.
Enter the recipient number by using one of the following options:3.
Click
• To.... Then select one or more phone numbers by entering the Phonebook.
Enter the recipient number(s) directly.
•
Enter the message content.4.
After editing the message, you can choose the following options:5.
Click
• Send: To send the message.
Click• Save: To save the message in the draftbox folder.
Click• Close: To exit from editing the current message.
Inbox
Inbox stores the received messages.
To display the Inbox interface, do as follows:
Click1. to display the SMS interface.
Choose2. Local > Inbox or SIM> Inbox to display the Inbox interface

20
Reading SMS
When receiving a new SMS, the system will pop-up a dialog box in the taskbar.
•
You can then click “OK” to enter the SMS interface.
NOTE:
You can press and hold Shift or Ctrl, and click the selected messages;
•
You can forward only one message a time.
•
New messages can not be received when the SIM card space for SMS is full
•
(different SIM cards have different capacities). The system will indicate that the inbox
is full and ask the user to free up space in the inbox on the SIM card.
You can view SMS in the Inbox as follows:
Click the selected message.1.
The name and phone number of the message sender, message content,2.
and received time are displayed besides the messages.
Click the selected message for the following options:3.
• Reply: In the Reply interface, re-edit the message and send it to the message
sender.
Forward:• Forward the message to another recipient.
Save Num:• In the Save Num interface, enter other information and save the
contact.
• Move: Move the SMS to a different location (to computer or to SIM card). When the
modem receives a new SMS, it will be saved to the SIM card by default. Afterwards
it can be moved to the computer.
Delete:• Delete the message..
Sentbox
Sentbox stores the sent messages, including the messages sent both successfully and
unsuccessfully.
To display the Sentbox interface, do as follows: