Zte MF668 Setup guide

- 1 -
ZTE
MF668 USB Modem
Quick Start User Guide
www.zte.com.cn
© ZTE Corporation, 2008.

- 2 -
1. Insert the SIM Card into the modem
2. Connect the USB modem to your computer
Before connecting the modem for the first time, uninstall all previous versions of the
software.
Insert the modem into an available port on your computer. Alternatively, you may use
the supplied USB cable to connect the modem to the computer. In most cases the
single cable should suffice. However, to increase the power delivered to the modem,
use the double USB cable if required.
After the modem is connected, your computer will automatically launch Autorun, the
installation application software.
Note: If your security settings prevent Autorun from starting automatically, you will
The SIM slot is located at the rear end
of the device under a slide out cap
Before using the modem make sure the SIM
card supports data services. Insert the SIM
card as shown with the gold contacts facing
down and the beveled edge facing outwards of
the device.
Push the SIM card in as far as it will go.

- 3 -
have to start the process manually. Navigate to the CDROM and double click the
Autorun.exe file to start the software installation.
3. First Time Software Installation
Select your language and click OK.

- 4 -
First Time Software Installation Continued…
Click Next to continue.

- 5 -
First Time Software Installation Continued…
Read the license agreement, select I accept the terms of the license agreement
and press Next.

- 6 -
First Time Software Installation Continued…
Click Next to accept the default installation location or press Change to specify your
preferred path.

- 7 -
First Time Software Installation Continued…
The wizard will take a few minutes to install software. Click Finish to complete.

- 8 -
4. Using your Modem
Insert your modem into an available USB port on your computer. Your computer will
launch the Connection Manager application automatically. The modem will initialize
and the main user interface will appear as illustrated below.

- 9 -
Using your Modem Continued…
Click the Internet button and then click Connect to establish a connection to the
internet.
5. Removing the Modem Safely
Please close the application software first, use the Safe Hardware Removal
procedure and then pull out the modem or USB cable from the computer.

- 10 -
6. LED Indicator
7. Functions & Operation
Connects to the internet.
Messages Interface
View your Contacts
Opens the Rogers Home Page
Change system settings
View the Help file
LED Indicator USB Modem Working Status
Yellow Power on. Not registered on the 2G or 3G network
Green Solid Registered on the 2G network.
Green blinking Active data transfer on the 2G network
Blue solid Registered on the 3G network.
Blue blinking Active data transfer on the 3G network.
Red solid Roaming status or no SIM card
Red blinking Active data transfer in roaming status

- 11 -
8. Icons
Shows network signal strength Modem offline
New SMS message in your Inbox Modem disconnected
Disconnected from the internet SIM card inserted
Connected to the internet SIM card not inserted
Name of your service
provider Current network type:
EDGE, GPRS, HSPA or HSPA+
Modem Connected SIM card is roaming
9. MacOS Installation
1. Uninstall all previous versions of the USB Modem software and restart the
computer.
2. The installation program should launch automatically. If this feature is disabled
on your computer, double click the Rogers Connection Manager CD drive that
appears on your desktop and select Rogers Connection Manager.
3. Press Continue on the welcome page.
4. Select a destination to install the software on the volume Macintosh HD, and
then click Continue.
5. Select Installation Type and then click Install.
6. Enter user name and password to be authenticated, and left click OK to install.
7. Click Continue Installation and make sure that installing requires restarting the

- 12 -
computer.
8. Left click Restart to restart the computer and finish software installation.
10. Using your modem with MacOS
Connect your modem to the computer. Your computer will launch the Connection
Manager application automatically. The modem will initialize and the main user
interface will appear. If the application does not launch, double click Finder >
Applications > Rogers Connection Manager to run the software.
Click Help in the Mac connection manager for the complete user manual.

- 13 -
Limited Warranty
We, at ZTE, undertake to repair/replace any defective components/subsystems of
this product, subject to the warranty terms given below.
•The warranty period will be 12 months from the date of purchase and defects
arising out of defective material and/or poor workmanship will be rectified free of
cost to the original end user during the said period.
•The limited warranty extends only to the original end user of the product and is
not assignable or transferable to any subsequent purchaser/end user.
•The defective unit along with the warranty card/sales receipt or a Rogers
warranty validation certificate must be brought or sent to the Rogers dealer by
the buyer at his/her own expense, during normal working hours.
•Any defect arising due to misuse of the unit or normal wear and tear will not be
covered by this warranty. This includes all plastic surfaces and all other
externally exposed parts that are scratched or damaged due to normal
customer use.
•The warranty is void if the unit is tampered with, altered or repaired by
unauthorized persons. Any use of non-approved accessories shall void the
warranty.
•The warranty is void if the serial number of the unit is deleted, defaced or
altered rendering it difficult to identify the instrument.
•There are no customer serviceable parts inside the unit and therefore the unit
should not be opened by the user or any person other than the authorized
service personnel.
•The warranty is void if the warranty seal on the unit is broken.

- 14 -
•Damages caused to the unit, by power fluctuations, accidents, lightning or any
other acts of God are not covered by this warranty.
•Whether defective items or components are to be replaced or repaired shall be
left to the sole discretion of ZTE. In case of replacement of a part, the defective
part removed from the unit becomes the property of ZTE.
EXCLUSION OF LIABILITY:
NO OTHER EXPRESS WARRANTY IS APPLICABLE TO THIS PRODUCT. THE
DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED
WARRANTY OF MERCHANTABILITY, ZTE IS LIMITED TO THE DURATION OF
THE EXPRESS WARRANTY HEREIN. ZTE SHALL NOT BE LIABLE FOR THE
LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY
OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE
OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILITY APPLICABLE TO THIS PRODUCT.
HOW TO GET WARRANTY SERVICE:
To obtain warranty service, contact or return to your original place of purchase, or
you may call ZTE directly via the following telephone number from anywhere in
Canada: 1-866-ZTE-3838 (1-866-983-3838)