Zte A002ZT User manual

1
A002ZT
USB Modem
Quick Start Guide

2
Getting to Know Your
Modem
Your modem supports data services through the
mobile phone network, enabling you to
communicate anytime and anywhere.
The following figure is only for your reference.
The actual product may be different.

3
1. Rotatable USB connector
2. Indicator light
Red
blinking
• There is no nano-SIM card inserted
or the nano-SIM card is damaged.
• The PIN or PUK is enabled.
Red on • The device is just powered on.
• The device is searching for available
networks.
• There is no network service
available.
Green
on
The device is connected to the 2G/3G
mobile network and data is being
transferred.
Green
blinking
The device is registered to the 2G/3G
mobile network.
Blue on The device is connected to the LTE
network and data is being transferred.
Blue
blinking
The device is registered to the LTE
network.
3. nano-SIM card slot cover

4
Installing the nano-SIM
Card
1. Open the nano-SIM card slot cover.
NOTE:
Do not remove the cover rudely, because it is
connected with the device.
2. Install a nano-SIM card to the nano-SIM card
slot.
WARNING!
To avoid damage to the device, do not use any
other kind of SIM cards, or any non-standard
nano-SIM card cut from a SIM card. You can get
a standard nano-SIM card from your service
provider.
3. Close the nano-SIM card slot cover.

5
Connecting the Modem to
Your PC
Rotate the USB connector and insert the modem
into your computer’s USB port securely. The
operating system automatically detects and
identifies your modem and installs the software
automatically.
NOTE:
If the system does not launch installation
automatically, you can double-click the modem
installation icon in My Computer > ZTEMODEM
to install the software.

6
Logging in to the Device
Manager Website
1. Launch the Internet browser and enter
http://192.168.0.1 in the address bar or click
on your desktop.
2. Click Login and enter the password to log in to
the Device Manager Website.
NOTE:
View the label on the device to get the default
password.

7
Accessing the Internet
After a client device is successfully connected to
your device, you can access the Internet in Auto
or Manual mode. The default mode is Manual.
Mode Operation
Auto Your device is automatically
connected to the Internet.
To set Auto mode:
1. Log in to the Device Manager
Website.
2. Select Settings > Mobile
Network > Network
Settings > Connection
Mode > Auto, and then click
Save Changes.
Manual 1. Log in to the Device Manager
Website.
2. Select Home, and click
Connect to connect to the
Internet.
NOTE:
To change the current connection setting, please
disconnect from the Internet first.

8
Getting More Help
You can get help by:
Sending an email to [email protected]
Visiting www.ztedevices.com

9
LEGAL INFORMATION
Copyright © 2020 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted,
reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including
photocopying and microfilm, without the prior written
permission of ZTE Corporation.
The manual is published by ZTE Corporation. We
reserve the right to make modifications on print errors
or update specifications without prior notice.
Version No.: R1.0

10
Warning and Notice
Using Your Modem
If inadequately shielded, some electronic devices
may be affected by the electromagnetic
interference caused by the modem, such as the
electronic system of vehicles. Consult the
manufacturers of such devices before using the
modem if necessary.
Operating the modem may interfere with medical
instruments such as hearing aids and pacemakers.
Always keep the modem more than 20
centimeters away from such medical instruments
when your modem is turned on. Turn the modem
off if necessary. Consult a physician or the
manufacturers of medical instruments before
using the modem if necessary.
Be aware of the usage limitation when using the
modem at places such as oil warehouses or
chemical factories, where there are explosive
gases or explosive products being processed.
Turn off the modem if necessary.
Do not use electronic transmission devices in
aircrafts, at petrol stations or in hospitals. Observe
and obey all warning signs, and turn off the
modem in these conditions.
Do not touch the inner antenna area unless it is

11
necessary. Otherwise the performance of the
modern may be affected.
Keep the modem out of the reach of little children.
The modem may cause an injury if used as a toy.
When the modem is operating, do not touch the
metallic parts. Failing to do so may cause burns.
Use original accessories or accessories that are
authorized. Using any unauthorized accessories
may affect the performance of the modem and
violate the related national regulations about
telecom terminals.
Avoid using the modem near or inside metallic
structures or establishments that can emit
electromagnetic waves, because signal reception
may be affected.
The modem is not waterproof. Keep the modem
dry and store it in a shady and cool place.
Do not use the modem immediately after a
sudden temperature change. In such case dew
may be generated inside and outside the modem,
so do not use it until it becomes dry.
Handle the modem carefully. Do not drop, bend or
strike it. Otherwise the modem may be damaged.
Only qualified personnel can dismantle and repair
the modem.
An operating temperature between -10 °C and

12
+60 °C and a humidity between 5% and 95% are
recommended.
Limited Warranty
This warranty does not apply to defects or
errors in the product caused by:
i. Reasonable abrasion.
ii. End users’ failure to follow ZTE’s installation,
operation or maintenance instructions or
procedures.
iii. End users’ mishandling, misuse, negligence, or
improper installation, disassembly, storage,
servicing or operation of the product.
iv. Modifications or repairs not provided by ZTE or
a ZTE-certified individual.
v. Power failures, surges, fire, flood, accidents,
and actions of third parties or other events
outside ZTE’s reasonable control.
vi. Usage of third-party products, or usage in
conjunction with third-party products if such
defects are due to the combined usage.
vii. Any other cause beyond the range of normal
usage intended for the product.
End users have no right to reject or return the product,
or receive a refund for the product from ZTE under
the above-mentioned situations.
This warranty is end users’ sole remedy and

13
ZTE’s sole liability for defective or
nonconforming items, and is in lieu of all other
warranties, expressed, implied or statutory,
including but not limited to the implied
warranties of merchantability and fitness for a
particular purpose, unless otherwise required
under the mandatory provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or
indirect, special, incidental or consequential damages
resulting from or arising out of or in connection with
using of this product, no matter whether or not ZTE
had been advised, knew or should have known of the
possibility of such damages, including, but not limited
to lost profits, interruption of business, cost of capital,
cost of substitute facilities or product, or any
downtime cost.

14
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limitsfor
exposure to radio waves recommended by
international guidelines. These guidelines were
developed by the independent scientific
organization FCC and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known
as SpecificAbsorption Rate, or SAR. The SAR
limit for mobile devices is 1.6 W/kg and the
highest SAR value for this device when tested at
the body was 1.358 W/kg* with 5 mm distance.
As SAR is measured utilizing the device’s highest
transmitting power, the actual SAR of this device
while operating is typically below that indicated
above. This is due to automatic changes to the
power level of the device to ensure it only uses
the minimum power required to communicate
with the network.

15
§ 15.19 Labeling requirements.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct

16
the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the
equipment and receiver.
-Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced
radio/TV technician for help.
ZTE CORPORATION
NO. 55, Hi-tech Road South, Shenzhen, P.R.China
Postcode: 518057