ZyXEL Communications nwa1100-n User manual

IPAddress http://192.168.1.2
Username admin
Password 1234
NWA1100-N
Quick StartGuide
802.11b/g/nPoEAccess
Point
FirmwareVersion1.00
Edition 1,3/2011
DEFAULTLOGINDETAILS
www . zyxel.com
2011ZyXELCommunicationsCorporation

2
Panels

3
Overview
ENGLISH
ThisQuickStartGuideshowshowtoset upand configurethe
NWA1100-N(marked Zin thefigure)toallowwirelessclientstosecurely
accessyourwired network.See yourUser sGuideformoreinformation.
You mayneedyourInternet accessinformation.
Tosetup yourwirelessnetworkyou need to:
•ConnecttheHardware
•AccesstheWebConfigurator
•ConfiguretheNWA1100-N
•InstalltheHardware
•SetUpPoweroverEthernet(Optional)

4
Connect theHardware
1
23
1. UsingtheEthernet cable,connectthe ETHERNET porttoacomputer
forinitial configuration.
2. Connectthe POWER 12VDC sockettoapowersourceusingonlythe
included poweradaptor.
Connectthe NWA1100-N s ETHERNET port toan Ethernetjackwithnetwork
accessafteryouhavecompleted the initialconfiguration.

5
LEDs
•The SYS LEDblinks red,then turnssteadygreen when thepoweris
connected.
•OneoftheLEDsbythe ETHERNET port turnsoniftheportis
properlyconnected,andblinkswhen thereistraffic. The yellowlight
shinesiftheconnection isat1000 Mbps.Thegreen light shinesif
theconnection isat 10/100Mbps.
# If neitherLED nearthe ETHERNET port turnson, checkthe cable
connectionstotheport. Ensureyourcomputer snetworkcardisworking
properly.
Access theWebConfigurator
InternetExplorer6.0and laterversions,withJavaScriptenabled,orMozillaFirefox
3and laterversionsorSafari2.0and laterversions.
SetUpYourComputer sIPAddress
Notedownyourcomputer scurrentIPsettingsbeforeyou change them.

6
First, setyourcomputertouseastaticIPaddress inthe192.168.1.3-
192.168.1.254rangewithasubnetmaskof 255.255.255.0. Thisensures
thatyourcomputercan communicatewithyourNWA1100-N.See your
User sGuideforinformation on settingupyourcomputer sIPaddress.
Log IntotheWebConfigurator
Even though you can connecttothe NWA1100-Nwirelessly,it isrecommended
thatyou connect yourcomputertothe ETHERNET port forinitialconfiguration.
1. Launchyourwebbrowser.Enter
192.168.1.2 (the NWA1100-Ns
default IPaddress)asthe
address.
# If you cannotaccessthe Web configurator,makesurethe IPaddressesand
subnet masksof the NWA1100-N and thecomputerareinthe same IP
addressrange.
2.Enter admin (the default
username)inthe Username field
and 1234 (thedefaultpassword)in
the Password field.Click Login.
3.Change the loginpasswordby
entering anew passwordand
clicking Apply. Besuretorecord
the new passwordand keepit ina
safeplace.
# If you change the passwordand thenforget it,you willneed toreset the
NWA1100-N. Refertothe User sGuide forhow tousethe RESET button.

7
4.The STATUS screen appears.
ConfiguretheNWA1100-N
ConfigureSystemSettings
1. Click SYSTEM in thenavigation panel.
2. The SYSTEM>General screen appears.
•SystemName isforidentifying theNWA1100-Non yournetwork.
Chooseadistinctivename,orleavethisatitsdefault.

8
•You can configuretheEthernetport speed andduplexin the
EthernetDataRatefield. If you arenot sure,select Auto .
3. Click Apply.
ConfigureWirelessSettings
1. Click WIRELESS inthenavigation panel.The WirelessSettings
screen displays. Configurethebasicsettingsforyourwireless
network.
The wirelessstationsand the NWA1100-Nmust usethe sameSSID, channelID
and encryption settingsforwirelesscommunication.
•OperationMode: Ensurethat AccessPoint modeisselected.

9
•Wireless Mode: Select thewirelessstandardyou want your
networktouse.If you arenotsurewhichtoselect, select 802.11b/
g/n.
•SSIDProfile: Select theSSIDprofileyou wanttoconfigurefor
networkaccessfromthedrop-downlist box.
•Channel: Select thewirelesschannel you want yournetworkto
use.
•ChannelWidth: Select thechannel bandwidthyou want touse.If
you arenot sure, select 20/40MHz.
2. Click Apply tosaveyoursettings.
3. Click the SSID tab.If you want toconfigureadvanced settingsofan
SSIDprofile(suchaschangethe profilename, SSID,orsecurity),
selectitand click Edit.

10
4. Click the Security tab. Select theprofileyou wanttoconfigureand
click Edit.
5. Theedit screen oftheselected securityprofileappears. If you don t
configurewirelesssecurity,anyonecan access yournetwork.
•Thisiswhereyou can enterthesecuritysettingsforyourwireless
network.The fieldsyoufillindifferaccordingtothe type ofsecurity
you select in the SecurityMode field.Select None if youdo not
wishtousewirelesssecurity.
•Thisexampleuses WPA2-PSK security, in whichall wirelessclients
mustusethesamepre-shared keytojointhenetwork.
•Ensurethatall yourwirelessclientssupport thetype of securityyou
set. Click Apply when you havefinished.
# If the wirelessclientscannotcommunicatewiththe network, ensurethat the
clientsand the NWA1100-Nareusing the same wirelesssecuritysettings.

11
ConfigureIPSettings
1. You need tosetyourNWA1100-N sIPaddresstobeinthesame
subnet asyournetwork.Click IP in thenavigation panel.
•Select ObtainIPAddress Automatically ifyou want tohavea
DHCPserveron yournetworkassignan IPaddress tothe
NWA1100-N.
•If you haveaspecificIPaddresstouse, select Use FixedIP
Address and enteritalongwiththesubnet mask and gatewayIP
address.
•If yourISPprovided specificDNS(DomainNameSystem)
settings, enterthemin the SystemDNSServers section.
Otherwise,leavethesefieldsattheirdefaults.
•Click Apply.TheNWA1100-NnowusesthenewIPsettings; you
can nolongerconnecttotheNWA1100-Nusing thedefault IP
address.
Ifyouchangethe NWA1100-N sIPaddress, you mustusethe newIPaddress
when you next accessthe web configurator.Ifyou select ObtainIPAddress
Automatically,checkyourDHCPservertodetermine the IPaddressit assignsto
the NWA1100-N.RefertoyourDHCPserver sdocumentationformoreinformation.

12
2. If you changed yourcomputer sIPaddress,returnittoitsprevious
setting.
3. Changethewirelesssettingsin thewirelessstationstomatchthose
oftheNWA1100-N,ifnecessary.Refertoyourwirelessadapter s
documentation.
The NWA1100-Nisnowreadytoconnecttoyourswitchorrouter.
You can dothisnow,oronceyou haveattached theantennasand
mounted theNWA1100-N.
# If the NWA1100-Ncannotcommunicatewiththe network,ensurethatthe
NWA1100-Nisusing an IPaddresson the same subnetastheswitch/router.
InstalltheHardware
Attaching Antennas
Screwtheantennasclockwiseontothe
antennaconnectorson thesidesofyour
NWA1100-N.Theantennasshouldbe
perpendiculartothegroundand parallel to
eachother.
Makesuretheantennasaresecurely
screwed ontotheantennaconnectors.
HardwareMounting
Ingeneral, thebestlocation fortheaccesspoint isat thecenterofyour
intended wirelesscoveragearea.Forbetterperformance,mountthe
NWA1100-Nhigh up inan area that isfree ofobstructions.

13
Wall-mounting
DothefollowingtoattachyourNWA1100-Ntoawall.

14
1. Screwthetwoscrewsprovided withyourNWA1100-Nintothewall
60mmapart(see thefigureinstep 3). Usescrewswith6mm~8mm
(0.24"~0.31")wideheads.Donotscrewthescrewsall thewayinto
thewall; leaveasmall gap betweenthehead ofthescrewand the
wall.
Thegap mustbebigenoughforthescrewheadstoslideintothe
screwslotsand theconnection cablestorundownthebackofthe
NWA1100-N.
Makesurethe screwsaresecurelyfixed tothe walland strong enough toholdthe
weightofthe NWA1100-Nwiththe connection cables.
2. Adjustthecables.
Run theconnection cablesdownthe backoftheNWA1100-Nas
shownin thefollowing figure.
OR:
Run theconnection cablesupwardandalong theedgeoftheceiling.
3. Alignthe holesonthe back oftheNWA1100-Nwiththescrewsonthe
wall.HangtheNWA1100-Non thescrews.

15
NWA1100-N(
Z )
•
•
•NWA1100-N
•
•( )

16
1
23
1. ETHERNET
2. ( ) POWER
12VDC NWA1100-N ETHERNET

17
LED
•SYSLED
• ETHERNET LED
1000 Mbps 10/100Mbps
# ETHERNET LED
Internet Explorer6.0 JavaScript MozillaFirefox3
Safari2.0
IP
IP

18
192.168.1.3-192.168.1.254 IP
255.255.255.0
NWA1100-N IP
NWA1100-N
ETHERNET
3. 192.168.1.2 (NWA1100-N
IP )
# NWA1100-N IP
IP
4. Username ( )
admin ( )
Password ( ) 1234
( ) Login (
)
5. Apply ( )
# NWA1100-N
RESET ( )

19
6. STATUS ( )
NWA1100-N
1. SYSTEM ( )

20
2. SYSTEM>General ( > )
•SystemName ( ) NWA1100-N
•EthernetDataRate ( )
Auto ( )
3. Apply ( )