3M Littmann Lightweight II S.E. User manual

Artwork No.: 38-9018-0777-6
Date: 10/17/03
Author: R Myhre
Superseedes: 38-9018-0034-2
Pkg Spec Ref: 34-7050-5554-8
Structure: Booklet Cover
Scale: 1 Inch
all artwork prints 4 color process
3M is a trademark of 3M.
Littmann is a registered trademark of 3M.
38-9018-0777-6
Made in USA by 3M Health Care, St. Paul, MN 55144-1000
(U.S.A.) 1-800-228-3957 • Fax [phone]
Visit our web site: http://www.3M.com/Littmann
Attention, see instructions for use.
3M Health Care D-41453 Neuss, Germany
Lightweight II S.E.
Stethoscope
• Innovative chestpiece design
• Reliable and clear acoustics
• Lightweight, durable design
• Tunable diaphragm for
monitoring low and
high frequencies
• Single lumen tube
• Convenient shape for
blood pressure applications
Improved
Design &
Acoustics

Intended Use:
This product is intended for limited physical
assessment and other general purpose uses
such as blood pressure assessment. It can be
used for auscultation of heart, lung and other
body sounds. This product is not designed,
sold or intended for use except as indicated.
Precautions:
• Avoid extreme heat, cold, solvents, and oils.
• The entire stethoscope can be wiped clean
with alcohol or soapy water.
• Eartips can be removed from the ear tubes
for thorough cleaning.
NOTE: Do not immerse your stethoscope
in any liquid or subject it to steam
sterilization. If disinfection is required, the
stethoscope may be wiped with a 70%
isopropyl alcohol solution.
Explanation of Symbols:
• Attention, see instructions for use.
• This product and package do not
contain natural rubber latex.
Instructions for Use:
Chestpiece:
On Littmann stethoscopes with traditional
combination chestpiece, you select either the
diaphragm or open bell side by holding the
chestpiece stem in one hand and rotating the
chestpiece with the other hand until a click is
felt.
Changing Frequencies Using the
Tunable Diaphragm:
Your Littmann Lightweight II S.E. Stethoscope
is equipped with a 3M tunable style diaphragm
that enables you to listen to both low and high
frequency sounds without turning over the
chestpiece.
Low frequencies:
To listen to low
frequency sounds,
(traditional bell
mode) you can use
either the open bell or
tunable diaphragm
using very light skin
contact.
High frequencies:
To listen to higher
frequency sounds,
using the tunable
diaphragm, press
firmly on the
chestpiece. To listen to low and high frequency
sounds without removing and turning over the
chestpiece, simply alternate between light and
firm pressure on the tunable diaphragm.
Eartip Replacement:
For maximum acoustic
performance,
comfortable patented
3M™ Littmann®
Soft-sealing Eartips are
provided with your
stethoscope. This
2
!
38-9018-0777-6 11/7/03 1:16 PM Page 3
English
3M™ Littmann® Lightweight II
S.E. Stethoscope
Product Description:
The Littmann Lightweight II S.E. is designed
with a new ovoid shaped chestpiece and offset
bell that allows easy access to auscultation
areas difficult to probe with circular
chestpieces. The new design also utilizes 3M's
tunable style diaphragm, non-chill rim and
diaphragm, patented 3M™ Littmann® Soft-
Sealing Eartips and a comfortably angled,
anatomically correct headset and comes in a
variety of colors to meet individual
preferences.
Most of all, know that your Littmann
Lightweight II S.E. stethoscope carries the
Littmann brand name, the name known
worldwide for unsurpassed quality. As a
trusted leader in auscultation technology, the
Littmann brand of stethoscopes is your
assurance of acoustical superiority, innovative
design and exceptional performance.
1

English
3M™ Littmann® Lightweight II
S.E. Stethoscope
Product Description:
The Littmann Lightweight II S.E. is designed
with a new ovoid shaped chestpiece and offset
bell that allows easy access to auscultation
areas difficult to probe with circular
chestpieces. The new design also utilizes 3M's
tunable style diaphragm, non-chill rim and
diaphragm, patented 3M™ Littmann® Soft-
Sealing Eartips and a comfortably angled,
anatomically correct headset and comes in a
variety of colors to meet individual
preferences.
Most of all, know that your Littmann
Lightweight II S.E. stethoscope carries the
Littmann brand name, the name known
worldwide for unsurpassed quality. As a
trusted leader in auscultation technology, the
Littmann brand of stethoscopes is your
assurance of acoustical superiority, innovative
design and exceptional performance.
1
38-9018-0777-6 11/7/03 1:16 PM Page 3
Intended Use:
This product is intended for limited physical
assessment and other general purpose uses
such as blood pressure assessment. It can be
used for auscultation of heart, lung and other
body sounds. This product is not designed,
sold or intended for use except as indicated.
Precautions:
•Avoid extreme heat, cold, solvents, and oils.
•The entire stethoscope can be wiped clean
with alcohol or soapy water.
•Eartips can be removed from the ear tubes
for thorough cleaning.
NOTE: Do not immerse your stethoscope
in any liquid or subject it to steam
sterilization. If disinfection is required, the
stethoscope may be wiped with a 70%
isopropyl alcohol solution.
Explanation of Symbols:
!
• Attention, see instructions for use.
• This product and package do not
contain natural rubber latex.
Instructions for Use:
Chestpiece:
On Littmann stethoscopes with traditional
combination chestpiece, you select either the
diaphragm or open bell side by holding the
chestpiece stem in one hand and rotating the
chestpiece with the other hand until a click is
felt.
Changing Frequencies Using the
Tunable Diaphragm:
Your Littmann Lightweight II S.E. Stethoscope
is equipped with a 3M tunable style diaphragm
that enables you to listen to both low and high
frequency sounds without turning over the
chestpiece.
Low frequencies:
To listen to low
frequency sounds,
(traditional bell
mode) you can use
either the open bell or
tunable diaphragm
using very light skin
contact.
High frequencies:
To listen to higher
frequency sounds,
using the tunable
diaphragm, press
firmly on the
chestpiece. To listen to low and high frequency
sounds without removing and turning over the
chestpiece, simply alternate between light and
firm pressure on the tunable diaphragm.
Eartip Replacement:
For maximum acoustic
performance,
comfortable patented
3M™ Littmann®
Soft-sealing Eartips are
provided with your
stethoscope. This
2

Correct
Incorrect
examine the ring to
ensure that the flexible
edge is smoothly engaged
inside the rim. Refer to
illustration for correct
assembly of the non-chill
rim and diaphragm. If
necessary, flex the
assembly by pinching the
outer rim edge between
the thumb and fingers.
To attach the
rim/diaphragm assembly
to the chestpiece, engage
the groove of the rim
(with the diaphragm
attached) around the
chestpiece at one point
and hold it in place with
your thumbs. Slowly roll
the rim around and over
the chestpiece edge using
both thumbs, moving in opposite directions
around the chestpiece. Visually inspect the
edge where the diaphragm engages the rim for
uniform containment. Minor adjustments may
be made by slightly pulling and rolling the rim
away from the diaphragm, allowing the
diaphragm to slip into position.
Littmann Stethoscope Service and
Warranty Program:
Your Littmann stethoscope comes with the
finest service and warranty policy in the
industry. The Littmann Lightweight
Stethoscope is warranted against any defects in
material and workmanship for a period of two
(2) years. If a material or manufacturing defect
is discovered during the warranty period,
repairs will be made without charge upon the
return of the instrument to 3M, except in cases
of obvious abuse or accidental damage.
For maintenance or repair services, write a
short note explaining the repair or service you
require, include your name, address and phone
number and send your stethoscope directly to:
3M Health Care Service Center
Bldg. 502, Suite 200
3350 Granada Ave. North
Oakdale, MN 55128
1-800-292-6298
IN CANADA:
3M Health Care Service Center
3M Canada Inc.
80 Enterprise Drive South
London, Ontario
Canada N6N1C2
1-800-563-2921
Outside of the U.S. and Canada please contact
your local 3M subsidiary for maintenance and
repair information.
4
I
L
Q
U
A
N
N
A
M
T
T
L
I
T
Y
N
N
A
M
T
T
I
L
Q
U
A
L
I
T
Y
TM
38-9018-0777-6 11/7/03 1:16 PM Page 5
T
T
M
I
A
L
N
N
Q
U
Y
A
T
T
L
I
M
N
N
A
M
T
Y
T
T
I
I
L
L
A
U
Q
TM
U
Q
A
L
I
L
T
I
Y
T
T
M
N
N
A
stethoscope utilizes a unique design for
attaching the eartip to the eartube. The eartips
are pushed on to the end of the eartube and
snapped firmly into place. To remove, pull
firmly on the eartip.
Headset Adjustment:
Your Littmann
stethoscope is designed to
provide a comfortable,
acoustically sealed ear fit.
Notice that the ear tubes
are set to accommodate
the typical anatomy of the
ear canal. The eartips
should point in a forward
direction as you insert
them into your ear canals.
To reduce spring tension
in the headset, hold each
ear tube at the bend near
the eartip and gradually
pull apart until fully
extended.
To increase spring
tension, grasp the headset
with one hand where the
ear tubes enter the plastic
tubing and squeeze until
the plastic tubing on one
ear tube touches the other.
Repeat as necessary.
Removing the Diaphragm and
Cleaning the Chestpiece:
With the diaphragm side
up, push the rim at one
point with both thumbs
and roll the rim off the
edge of the chestpiece.
Remove the diaphragm
from the rim and clean
parts in soapy water or
wipe with alcohol. Wipe chestpiece surfaces
with alcohol or soapy water. Dry all parts and
surfaces thoroughly before reassembly.
Assembly and Replacement of the
Diaphragm:
Using your fingertip,
apply a small amount of
talcum powder to the
inside surface of the
flexible edge of the
diaphragm then align the
rim and diaphragm as a
unit. This will facilitate
assembly and maintain
smooth and quiet
low/high frequency
alternation. Snap the
diaphragm with your
fingers to remove excess
talcum powder. Insert
the flexible edge of the
diaphragm into the
groove of the rim. This
is best accomplished by
starting with the rim
positioned above the
legible side of the
diaphragm. Visually
3
Incorrect
N
N
A
M
T
T
I
L
Q
U
A
L
I
T
Y
TM
N
N
A
M
T
T
I
L
Q
U
A
L
I
T
Y
N
N
A
M
T
T
I
L
Q
U
A
L
I
T
Y
TM

stethoscope utilizes a unique design for
attaching the eartip to the eartube. The eartips
are pushed on to the end of the eartube and
snapped firmly into place. To remove, pull
firmly on the eartip.
Headset Adjustment:
Your Littmann
stethoscope is designed to
provide a comfortable,
acoustically sealed ear fit.
Notice that the ear tubes
are set to accommodate
the typical anatomy of the
ear canal. The eartips
should point in a forward
direction as you insert
them into your ear canals.
To reduce spring tension
in the headset, hold each
ear tube at the bend near
the eartip and gradually
pull apart until fully
extended.
To increase spring
tension, grasp the headset
with one hand where the
ear tubes enter the plastic
tubing and squeeze until
the plastic tubing on one
ear tube touches the other.
Repeat as necessary.
Removing the Diaphragm and
Cleaning the Chestpiece:
With the diaphragm side
up, push the rim at one
point with both thumbs
and roll the rim off the
edge of the chestpiece.
Remove the diaphragm
from the rim and clean
parts in soapy water or
wipe with alcohol. Wipe chestpiece surfaces
with alcohol or soapy water. Dry all parts and
surfaces thoroughly before reassembly.
Assembly and Replacement of the
Diaphragm:
Using your fingertip,
apply a small amount of
talcum powder to the
inside surface of the
flexible edge of the
diaphragm then align the
rim and diaphragm as a
unit. This will facilitate
assembly and maintain
smooth and quiet
low/high frequency
alternation. Snap the
diaphragm with your
fingers to remove excess
talcum powder. Insert
the flexible edge of the
diaphragm into the
groove of the rim. This
is best accomplished by
starting with the rim
positioned above the
legible side of the
diaphragm. Visually
3
N
N
A
M
T
T
I
L
Q
U
A
L
I
T
Y
TM
N
N
A
M
T
T
I
L
Q
U
A
L
I
T
Y
N
N
A
M
T
T
I
L
Q
U
A
L
I
T
Y
TM
Correct
Incorrect
38-9018-0777-6 11/7/03 1:16 PM Page 5
Y
I
L
Q
U
A
N
N
A
M
T
T
L
I
T
N
N
A
M
T
T
T
I
L
Q
U
A
L
I
Y
TM
examine the ring to
ensure that the flexible
edge is smoothly engaged
inside the rim. Refer to
illustration for correct
assembly of the non-chill
rim and diaphragm. If
necessary, flex the
assembly by pinching the
outer rim edge between
the thumb and fingers.
To attach the
rim/diaphragm assembly
to the chestpiece, engage
the groove of the rim
(with the diaphragm
attached) around the
chestpiece at one point
and hold it in place with
your thumbs. Slowly roll
the rim around and over
the chestpiece edge using
both thumbs, moving in opposite directions
around the chestpiece. Visually inspect the
edge where the diaphragm engages the rim for
uniform containment. Minor adjustments may
be made by slightly pulling and rolling the rim
away from the diaphragm, allowing the
diaphragm to slip into position.
Littmann Stethoscope Service and
Warranty Program:
Your Littmann stethoscope comes with the
finest service and warranty policy in the
industry. The Littmann Lightweight
Stethoscope is warranted against any defects in
material and workmanship for a period of two
(2) years. If a material or manufacturing defect
is discovered during the warranty period,
repairs will be made without charge upon the
return of the instrument to 3M, except in cases
of obvious abuse or accidental damage.
For maintenance or repair services, write a
short note explaining the repair or service you
require, include your name, address and phone
number and send your stethoscope directly to:
3M Health Care Service Center
Bldg. 502, Suite 200
3350 Granada Ave. North
Oakdale, MN 55128
1-800-292-6298
IN CANADA:
3M Health Care Service Center
3M Canada Inc.
80 Enterprise Drive South
London, Ontario
Canada N6N1C2
1-800-563-2921
Outside of the U.S. and Canada please contact
your local 3M subsidiary for maintenance and
repair information.
4

Lightweight II S.E.
Stethoscope
Artwork No.: 38-9018-0777-6
Date: 10/17/03
Author: R Myhre
Superseedes: 38-9018-0034-2
Pkg Spec Ref: 34-7050-5554-8
Structure: Booklet Cover
Scale: 1 Inch
all artwork prints 4 color process
• Innovative chestpiece design
• Reliable and clear acoustics
• Lightweight, durable design
• Tunable diaphragm for
monitoring low and
high frequencies
• Single lumen tube
• Convenient shape for
blood pressure applications
Improved
Design &
Acoustics
-
Made in USA by 3M Health Care, St. Paul, MN 55144-1000
(U.S.A.) 1-800-228-3957 • Fax [phone]
Visit our web site: http://www.3M.com/Littmann
Attention, see instructions for use.
3M Health Care D-41453 Neuss, Germany
3M is a trademark of 3M.
Littmann is a registered trademark of 3M.
38-9018-0777-6
-