3P Technik 1000200 Product guide

Operating and assembly instructions
3P Sinus Filter
Rainwaterfilter for installation within rainwater tanks
Item No. 1000200

Please read the instructions for installation and handling of your rainwater filter (3P Sinus Filter)
carefully, and follow the advice.
Technical data:
Installation advice:
for a height difference in tank between
inlet and outlet
from 0 cm
Operating and assembly instructions
Sinus Filter
for a height difference in tank between
inlet and outlet
from 11 cm = optimum installation situation
emergency
overflow
Overflow
siphon duo

How it works:
1. Rainwater is led onto the filter cartridge and
is slowed down through the inclination of
the cartridge.
2. Due to its smooth surface structure the dirt is
quickly rinsed away into the sewer.
3. The filter cartridge cleans the rainwater.
The cleaned rainwater is then led into the
rainwater tank.
Installation advice:
• Connect up the Inlet with a socket pipe connection,
or a connector piece.
• Connect the Overflow to the Tank Overflow Outlet
or to a 3P Overflow Siphon Duo with a socket
connector pipe, or use a 3P Rapid Connector.
• Connect a Calmed Flow Inlet via a vertical pipe,
cut to the required length. The Sinus Filter can be
fully supported by this standing pipe and
3P Calmed Inlet.
3P Sinus Filter in tank:
1. 3P Rapid Connector
2. Connection for optional 3P Backwashing Device
3. 3P Overflow Siphon Duo
4. 3P Calmed Flow Inlet
5. Standing Pipe
6. 3P Removal Device
Recommended Accessories:
Operating and assembly instructions
Sinus Filter
cleaned waterinto tank DN 100
rainwater inlet
DN 100
dirty water into
sewer DN 100
1
2
3
3P Removal Handle
For filter removal in deeper
installations, length 50 cm
Item No. 1000550
3P Rapid Connector DN 100
For a simple and rapid connection
of the filter within tanks
Item No. 4000750

Maintenance advice:
Monitor the filter condition regularly. Maintenance inspections are especially useful in spring
and autumn, and after long dry periods!
When testing the sieve, examine the filter by holding up against the light and inspect for any
blocked holes in the filter mesh. As necessary clean the filter with a brush, using a little
washing up liquid to help dissolve any fatty deposits or hydrocarbon build up. You may also
put the filter insert into a dishwasher. The filter insert is made of stainless steel. With horizontal
situated filters, like the 3P Sinus Filter, a streak of dirt maybuild up which dries out after a while.
The dirt then peals away or breaks off and with the next rain shower it is rinsed away.
Use of the Optional Backwashing Device (see below)! The filter is simply and easily cleaned
with the backwashing device. A small jet nozzle is installed below the filter sieve. In the
3P Compact Filter the filter cartridge rotates rapidly during rinsing. The strong jet of water
rinses the mesh effectively and dislodges the dirt and also the filter cartridge is typically left in
an alternate position.
Recommended Accessories:
3P Backwashing Device Sinus Filter
Backwashing Device
Profi Connection Set
Item No. 1000355
Guarantee:
3P Technik Filtersysteme GmbH offers this product the guarantee required by law
(from date of purchase).
3P Automatic Backwashing Device Sinus Filter
consisting of:
3P Backwashing Device,
Profi Connection Set and
Programmable Timing Device
Item No. 1000356
Öschstraße 14
73072 Donzdorf - Germany
T +49 (0) 71 62 - 94 60 7-0
F +49 (0) 71 62 - 94 60 7-99
[email protected]
www.3ptechnik.com