3P Technik 1000300 Product guide

Operating and assembly instructions
3P Patronen Filter
Rainwaterfilter for installation within rainwater tanks
Item No. 1000300

Please read the instructions for installation and handling of your rainwater filter
(3P Patronen Filter) carefully, and follow the advice.
Technical data:
Installation advice:
The 3P Patronen Filter is ideally suited for use
in conjunction with a 3P Overflow Siphon Duo,
for installation in a tank with a height difference
betweenthe Inlet and Outlet from 19 cm.
Operating and assembly instructions
Patronen Filter

How it works:
1. Rainwater is led onto the filter cartridge.
2. The filter cartridge cleans the rainwater.
The cleaned rainwater is led through the
calmed flowinlet into the rainwater tank.
3. Due to the steep inclination of the filter and its
smooth surface structure the dirt is quickly rinsed
away into the sewer.
Installation advice:
• Connect up the Inlet with a socket pipe connection,
or a connector piece.
• Connect the Overflow to the Tank Overflow Outlet or
to a 3P Overflow Siphon Duo with a socket connector
pipe, or use a 3P Rapid Connector.
• Connect a Calmed Flow Inlet via a vertical pipe, cut
to the required length. The PF Filter can be fully
supported by this standing pipe and 3P Calmed Inlet.
3P Patronen Filter in tank:
1. 3P Rapid Connector
2. Connection for optional 3P Backwashing Device
3. 3P Overflow Siphon Duo
4. 3P Calmed Flow Inlet
5. Standing Pipe
6. 3P Removal Device
Recommended Accessories:
3P Removal Handle
For filter removal in deeper
installations, length 50 cm
Item No.1000550
12
3
Operating and assembly instructions
Patronen Filter
cleaned water into tank DN 100
rainwater inlet
DN 100
dirty water into
sewer DN 100
3P Rapid Connector DN 100
For a simple and rapidconnection
of the filter within tanks
Item No.4000750

3P Automatic Backwashing Device Patronen Filter
consisting of:
3P Backwashing Device, Profi Connection
Set and Programmable Timing Device
Item No.1000356
Maintenance advice:
Monitor the filter condition regularly. Maintenance inspections are especially useful in spring
and autumn, and after long dry periods!
When testing the sieve, examine the filter by holding up against the light and inspect for any
blocked holes in the filter mesh. As necessary clean the filter with a brush, using a little washing
up liquid to help dissolve any fatty deposits or hydrocarbon build up. You may also put the filter
insert into a dishwasher. The filter insert is made of stainless steel. With slightly inclined filters,
like the Patronen Filter, a streak of dirt may buildup which dries out after a while. The dirt then
peals away or breaks off andwith the next rain shower it is rinsed away.
Use of the Optional Backwashing Device (see below)! The filter is simply and easily cleaned
with the backwashing device. A small jet nozzle is installed below the filter sieve. In the 3P
Patronen Filter the filter cartridge rotates rapidlyduring rinsing.The strong jet of water rinses
the mesh effectively and dislodges the dirt and also the filter cartridge is typically left in an
alternate position.
Recommended Accessories:
3P Backwashing Device Patronen Filter
Backwashing Device
Profi Connection Set
Item No.1000355
Guarantee:
3P Technik Filtersysteme GmbH offers this product the guarantee required by law
(from date of purchase).
Öschstraße 14
73072 Donzdorf - Germany
T +49 (0) 71 62 - 94 60 7-0
F +49 (0) 71 62 - 94 60 7-99
[email protected]
www.3ptechnik.com