3P Technik 1000400 Product guide

Operating and assembly instructions
3P Zisternen Filter
Rainwater filter for installation in rainwater tanks
Item No. 1000400

lease read the instructions for installation and handling of your filter (3P Zisternen Filter ZF)
rainwater filter carefully, and follow the advice.
Technical data:
Installation advice:
The 3P Zisternen Filter is ideally suited for use in
conjunction with a 3P Overflow Siphon Duo for
installation in a tank with a height difference
between the Inletand outlet from 22 cm.
Operating and assembly instructions
Zisternen Filter

Funktion:
1. Rainwater flows onto the first filtration step.
2. Coarse and larger dirt particlesare led away to
sewer / waste
3. The pre-filtered rainwater, having passed the
primary filter, reaches the second and finer filter.
From here finer dirtpasses to waste, clean water
to the tank.
4. The cleaned rainwater is led through a calmed
flowinlet into the rainwater tank
5. Due to the steep inclination of the fine filter
and its smooth surface structurethe dirt is quickly
cleaned awayinto the sewer.
Installation advice:
• Connect up the Inlet with socket pipe connection,
or a connector piece.
• Connect the overflow to the tank overflow outlet or
the 3P Overflow Siphon Duo with a socket connector
pipe or use a 3P Rapid Connector.
• Connect a calmed flow inlet via a vertical pipe,
cut to the required length.Filter can be fully
supported by the down pipe and 3P Calmed Inlet.
3P Zisternen Filter in tank:
1. 3P Rapid Connector
2. Connection for optional 3P Backwashing Device
3. 3P Overflow Siphon Duo
4. 3P Calmed Flow Inlet
5. Down pipe
Operating and assembly instructions
Zisternen Filter
3P Rapid Connector DN 100
For a simple and rapid
connection of the filter
within tanks
Item No. 4000750
Gereinigtes Wasser in Zisterne DN 100
Zulauf Regenwasser
DN 100
Schmutzwasser
in Kanal DN 100
c
tions
G
erein
igt
es Wasser in Zisterne DN 100
f
Regenwasser
0
0
Schmutzwasser
in Kanal DN 1
00
1
2
3
4
5
Recommended Accessories:

3P Automatic Backwashing Device Zisternenfilter
consisting of:
3P Backwashing Device,
Profi Connection
Set and Programmable
Timing Device
Item No. 1000456
Öschstraße 14
73072 Donzdorf - Germany
T +49 (0) 71 62 - 94 60 7-0
F +49 (0) 71 62 - 94 60 7-99
[email protected]
www.3ptechnik.com
Maintenance advice:
Monitor the filter condition regularly. Remove the filter lid and lift out the filter insert.
Maintenance inspections are especially useful in spring and autumn, and after long dry periods!
Examine the filter by holding up against the light and inspect for blocked holes in the filter
mesh. As necessary clean the filter with a brush, using a little washing up liquid to dissolve any
fatty deposits or hydrocarbon build up. You may also put the filter insert into a dishwasher.
The filter insert is made of stainless steel.
Use of the Optional Backwashing Device (see below)! The filter is simply and easily cleaned
with the backwashing device. A small jet nozzle is installed below the secondary filter sieve.
The strong jet of water rinses the mesh effectively and dislodges the dirt. With the next rain any
remaining loosened dirt particles are effectively rinsed away.
Recommended Accessories:
3P Backwashing Device Zisternenfilter
Backwashing Device
Profi Connection Set
Item No. 1000455
Guarantee:
3P Technik Filtersysteme GmbH offers this product
the guarantee required by law (from date of purchase).