3P Technik 1000300 User manual

Installation
Operating
3P Patronen Filter PF
Installation-Instructions
Operating-Instructions
Rainwaterfilter >for installation within rainwater tanks
From our rainwater product range:
Innovative Rainwater Harvesting
Art.-Nr. 1000300
3P Patronen Gebrauch GB 04.09.2007 12:42 Uhr Seite 2

Please read the instructions for installation and handling
of your 3P Patronen Filter PF rainwater filter carefully,
and follow the advice.
1. Technical data
2. Installation advice
02
The 3P Patronen Filter
is ideally suited for use
in conjunction with a
3P Overflow Siphon Duo,
for installation in a tank
with a height difference between
the Inlet and Outlet from 18 cm.
For filter removal
in deeper installations.
Length 50 cm.
Material Stainless Steel.
Art.-Nr. 1000550
For a simple and rapid
connection of the filter
within tanks
Art.-Nr. 1000210
150 m2Ø 100 0,7 x 1,7 mm Kanal 6,6 cm
3P Removal Handle 3P Rapid Connector
Recommended Accessories
3P Patronen Filter PF
3P Patronen Gebrauch GB 04.09.2007 12:42 Uhr Seite 3

03
3. How it works
4. Installation advice
– Connect up the Inlet with a socket pipe connection,
or a connector piece.
– Connect the Overflow to the Tank Overflow Outlet
or to a 3P Overflow Siphon Duo with a socket connector pipe,
or use a 3P Rapid Connector.
– Connect a Calmed Flow Inlet via a vertical pipe,
cut to the required length. The PF Filter can be fully supported
by this standing pipe and 3P Calmed Inlet.
5. 3P Patronen Filter in tank
p
id
t
er
3P Patronen Filter with:
– 3P Rapid Connector
– Connection for optional
3P Backwashing Device
– 3P Overflow Siphon Duo
– 3P Calmed Flow Inlet
– Standing Pipe
– 3P Removal Device
++
+ Backwashing Device
+ Profi Connection Set
+ Programmable
Timing Device
Art.-Nr. 1000356
+ Backwashing Device
+ Profi Connection Set
Art.-Nr. 1000355
3P Automatic Backwashing Device SF + PF
3P Backwashing Device SF + PF
1
2
3
4
5
6
7
1
2
3
4
5
6
7
3P Patronen Filter PF
Rainwater is led
onto the filter cartridge.
The filter cartridge
cleans the rainwater.
The cleaned rainwater
is led through the calmed flow
inlet into the rainwater tank.
Due to the steep inclination
of the filter and its smooth
surface structure
the dirt is quickly rinsed away
into the sewer.
1
3
2
rainwater inlet
DN 100
>
dirty water
into sewer
DN 100
cleaned water
into tank
DN 100
>
>
1
3
2
3P Patronen Gebrauch GB 04.09.2007 12:42 Uhr Seite 4

6. Maintenance advice
Monitor the filter condition regularly.
Maintenance inspections are especially useful in spring and autumn,
and after long dry periods!
When testing the sieve, examine the filter by holding up against the light
and inspect for any blocked holes in the filter mesh.
As necessary clean the filter with a brush, using a little washing up liquid
to help dissolve any fatty deposits or hydrocarbon build up.
You may also put the filter insert into a dishwasher.
The filter insert is made of stainless steel.
With slightly inclined filters, like the Patronen Filter, a streak of dirt may build
up which dries out after a while. The dirt then peals away or breaks off and
with the next rain shower it is rinsed away.
Use of the Optional Backwashing Device (see page 3)!
The filter is simply and easily cleaned
with the backwashing device.
A small jet nozzle is installed below the filter sieve.
In the 3P Patronen Filter the filter cartridge rotates rapidly
during rinsing.
The strong jet of water rinses the mesh effectively
and dislodges the dirt and also the filter cartridge
is typically left in an alternate position.
7. Guarantee
3P Technik Filtersysteme GmbH offers this product
the guarantee required by law (from date of purchase).
04
3P Patronen Filter PF
Rainwaterfilter >for installation within rainwater tanks
3P Backwashing Device
SF + PF
Innovative Rainwater Harvesting
w w w.3PTechnik.com
[email protected]
w w w.3PTechnik.com
3P Patronen Gebrauch GB 04.09.2007 12:42 Uhr Seite 1