Aaeon SBC-556/L User manual

SBC-556/L
Half-size CPU Card with
LCD, Ethernet, & SSD

FCC STATEMENT
THISDEVICECOMPLIESWITHPART15FCCRULES.OPERA-
TIONISSUBJECTTOTHEFOLLOWINGTWOCONDITIONS:
(1)THISDEVICEMAYNOTCAUSEHARMFULINTERFER-
ENCE.(2)THISDEVICEMUSTACCEPTANYINTERFERENCE
RECEIVED,INCLUDINGINTERFERENCETHATMAYCAUSE
UNDESIREDOPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO
COMPLY WITH THE LIMITS FOR A CLASS"A" DIGITAL
DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASON-
ABLE PROTECTION AGAINST HARMFUL INTERFERENCE
WHEN THE EQUIPMENT IS OPERATED IN A COMMER-
CIAL ENVIRONMENT. THIS EQUIPMENT GENERATES,
USES, AND CAN RADIATE RADIO FREQUENCY ENERGY
AND, IFNOTINSTALLEDANDUSED IN ACCORDANCE
WITH THE INSTRUCTION MANUAL, MAY CAUSE
HARMFUL INTERFERENCE TO RADIO COMMUNICA-
TIONS.OPERATION OF THIS EQUIPMENT IN A RESIDEN-
TIALAREA IS LIKELY TO CAUSE HARMFUL INTERFER-
ENCE IN WHICH CASE THE USER WILL BE REQUIRED
TOCORRECT THE INTERFERENCE AT HIS OWN EX-
PENSE.

Copyright Notice
This document is copyrighted, 1999, by AAEON Technology Inc.
All rights are reserved. AAEON Technology Inc. reserves the right
to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of AAEON Technology Inc. Information provided in
this manual is intended to be accurate and reliable. However,
AAEON Technology Inc. assumes no responsibility for its use, nor
for any infringements upon the rights of third parties which may
result from its use.
Acknowledgements
ALI is a trademark of Acer Laboratories, Inc.
AMD is a trademark of Advanced Micro Devices, Inc.
Award BIOS is a trademark of Award Software International, Inc.
AutoCAD and AutoShade are trademarks of Autodesk, Inc.
CHIPS Logotype is a registered trademark; Chips 69000 is a
trademark of Chips and Technologies, Inc.
Cyrixisatrademark of Cyrix Corporation.
IBM, PC/AT, PS/2 and VGA are trademarks of International
Business Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Lotus, 1-2-3 and Symphony are trademarks of Lotus Development
Corp.
Microsoft Windows®, MS-DOS, Corporation Windows and
Microsoft are registered trademarks of Microsoft Corp.
SiS is a trademark of Silicon Integrated System Corp.
SMC is a trademark of Standard Microsystems Corporation.
TurboDLD Classic is a trademark of Panacea Inc.
UMC is a trademark of United Microelectronics Corporation.
WordPerfect is a trademark of WordPerfect Corporation.
VESA®is a registered trademark of Video Electronics Standards
Association.
All other product names or trademarks are properties of their
respective owners.
Part No. 2047556003 SBC-556/L A1.4 4th Edition
Printed in Taiwan April 2000

Packing list
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1SBC-556/LCPUcard
• 1Quick Installation Guide
• 1 6-pin mini-DIN dual outlet adapter for keyboard and PS/2
mouse
• 1Hard disk drive (IDE) interface cable (40-pin)
• 1 Floppy disk drive interface cable (34-pin)
• 1 Parallel port adapter (26-pin) and dual outlet adapter. (one for
Rs-232,anotherone for RS-422/485)
• 1CD-ROMUtilities
• 4Utility disks with CHIPS 69000utility programs and drivers
If any of these items are missing or damaged, contact your distribu-
tor or sales representative immediately.

Notice
DearCustomer,
Thank you for purchasing the SBC-556/L board. The user
manual is designed to help you to get the most out of the SBC-556/
L, please read it thoroughly before you install and use the board.
The product that you have purchased comes with a two years
warranty, but AAEON cannot be responsible for misuse of the
product. Therefore, we strongly urge that the first read the manual
before using the product.
To receive the lastest version of the user manual, please visit our
Web site at: Taiwan: www.aaeon.com.tw
U.S.A : www.aaeon.com

Contents
Chapter 1: General Information .......................1
Introduction ........................................................................... 2
Features.................................................................................. 3
Specifications ......................................................................... 4
Board layout........................................................................... 6
Card dimensions.................................................................... 7
Chapter 2: Installation .......................................9
Jumpers and connectors.................................................... 10
Locating jumpers and connectors .................................... 12
Setting jumpers ................................................................... 13
Safety precautions ............................................................... 14
Installing the CPU............................................................... 14
CPU clock ratio (JP1)......................................................... 16
DRAM voltage setting (JP2) ........................................... 17
RS-232/422/485 select (COM2)(JP3).............................. 18
CPU VIO voltage setting (JP4) ........................................ 19
IR connector (Reserved)(JP5) ......................................... 20
CPU external clock select (JP6) ...................................... 21
CPU Vcore voltage select (JP7)....................................... 23
DOC address select (JP8)................................................. 25
Ethernet active/link signal LED (JP9)(JP10)(JP11) ..... 26
Clear CMOS data (JP12)................................................... 27
LCD inverter connector (CN1) ........................................ 28
Power LED and keylock connector (CN2) ..................... 29
IDE LED connector (CN3)................................................ 30
Hardware reset connector (CN4)..................................... 31
IDE hard drive connector (CN5) ...................................... 32
Fan power connector (CN6) .............................................. 34
Floppy drive connector (CN7) .......................................... 35
Parallel (Printer) port connector (CN8)........................... 37

Display connectors (CN9, CN15) ..................................... 38
Serial ports connectors (CN10, CN14)............................ 41
USB connectors (dual-port) (CN11)................................. 42
Ethernet connector (CN12)............................................... 43
Power connectors (P8 & P9)(CN13)................................ 44
KB & PS/2 Mouse connector (CN17) ............................. 45
DiskOnChip socket ............................................................ 47
Chapter 3: Award BIOS Setup ..........................49
System test and initialization ............................................. 50
Systemconfigurationverification ............................................50
AWARD BIOS setup........................................................... 51
Entering setup..........................................................................51
Standard CMOS setup ....................................................... 52
BIOS festures setup ........................................................... 53
Virus Warning..........................................................................54
Chipset features setup ....................................................... 56
Power management setup.................................................. 58
PM timers................................................................................60
PM Events...............................................................................61
PnP/PCI Configuration setup ............................................ 62
Load BIOS DEFAULT / LOAD SETUP DEFAULTS ... 65
Integrated Peripherals ....................................................... 66
Supervisor/User Password setting ................................... 70
Auto detect hard disk......................................................... 72
HDD low level format......................................................... 73
Save & exit setup................................................................ 74

Exit without saving ............................................................. 75
Chpater 4: Flat Panel/CRT Controller Display
Drivers and Utilities ......................77
Software drivers .................................................................. 78
Hardware configuration ..........................................................78
Necessary prerequisites ..........................................................79
Before you begin .....................................................................79
Windows 9595
9595
95 ..............................................................................................................................................
..............................................................................................................................................
....................................................................... 80
Windows 3.13.1
3.13.1
3.1............................................................................................................................................
............................................................................................................................................
...................................................................... 88
OS/2....................................................................................... 89
Windows ΝΤ3.51ΝΤ3.51
ΝΤ3.51ΝΤ3.51
ΝΤ3.51............................................................................................................................
............................................................................................................................
.............................................................. 91
Windows NT4.0.................................................................. 92
Chapter 5: Ethernet Software Configuration...
.........................................................93
Ethernet software configuration ....................................... 94
Appendix A: Programming the Watchdog
Timer.............................................. 95
Programming the watchdog timer .................................... 96
How to program the WATCHDOG TIMER...........................96
Demo program ........................................................................97
Appendix B: Installing PC/104 Modules ..........99
Installing PC/104 modules...............................................100

Chapter 1 General Information 1
1
General
Information
This chapter provides background
informationfor the SBC-556/L.
Sections include:
• Card specifications
• Board layout
CHAPTER

2SBC-556/L User Manual
Introduction
The SBC-556/L is an all-in-one single board Pentium computer card.
With an onboardflatpanel/CRTSVGAcontroller, the SBC-556/L
packs all the functions of an industrial computer and its display
capabilities onto a single, half-size card. This means the SBC-556/L is
your absolute best solution for embedded applications.
The onboard PCI-bus, flat panel/CRT SVGA controller uses the CHIPS
69000 chipset with 2 MB of SDRAM built in chip. This chipset, used
with local PCI-bus, is a 64-bit graphics engine. Excellent for display-
intensive applications, this card supports various LCD types, includ-
ingTFT, DSTN, MONO, andEL.
Another feature of the SBC-556/L is the inclusion of a high speed,
local bus IDE controller. This controller supports (through ATA PIO)
mode 3 and mode 4 hard disks, and Ultra DMA/33, enabling data
transfer rates up to 33 MB/second. Up to two IDE devices can be
connected, including large hard disks, CD-ROM drives, tape backup
drives, or other IDE devices.
Onboard features include two high-speed RS-232 serial ports with
16C550UARTs, one bidirectional SPP/EPP/ECP parallel port, and one
floppy drive controller. In addition, the SBC-556/L includes an extra
512 KB of second level on-board cache memory.
If program execution is halted by a program bug or EMI, the board's
watchdog timer can automatically reset the CPU or generate an
interrupt. This ensures reliability in unmanned or stand alone systems.
The SBC-556/L supports 5V EDO DRAM. It also provides two 72-pin
SIMM (Single In-line Memory Module) sockets for its onboard
system DRAM. These sockets give you the flexibility to configure
your system from 8 MB to 128 MB of DRAM using the most
economical combination of SIMMs.

Chapter 1 General Information 3
Features
•DiskOnChip(SSD)upto 144MB
•C&T 69000 LCD controller supports 36-bit TFT panels.
•100Base-T Fast Ethernet
•PC/104 expansion connector
•Optional function to support LVDS (Low Voltage Differential Signaling) for
high-speed and low-power data transfer.

4SBC-556/L User Manual
Specifications
CPU: IntelPentium75~200 MHz,P55C(MMX) 166~233MHz,Cyrix/IBM/
SGS6X86PR100+~166+,AMDK5PR75~166,K6PR2166~300
Businterface: ISA
CPUSocket: Intel Socket7
BIOS:256KBFLASHBIOS
Chipset:SiS5582
SuperI/OChipset:Winbond W83877 with Fully16-bit I/O decoded
Level2Cache: Onboard 512 KB pipeline burst 2nd level cache
Systemmemory: 8 MB to 128 MB. Two 72-pin SIMM socket onboard
EnhancedIDEharddisk drive interface:Supportsup to two hard diskdrives.
Supports PIO mode 4 and Bus Master. Also supports Multi-word DMA and
UltraDMA/33
Floppydiskdrive interface:supports up to two floppy disk drives, 5.25"(360
KBand1.2MB)and/or3.5"(720 KB, 1.44 MB and 2.88 MB)
Multi-modeparallelport:Configuredto LPT1, LPT2,LPT3ordisabled.
Supports SPP, ECP, and EPP.
Serialports: One RS-232 and one RS-232/422/485 serial port. Ports can be
configuredas COM1, COM2, COM3, COM4or disabled individually. Two
16C550 serial UARTs. IR connector reserved for future use.
Keyboard/mouseconnector:6-pinminiDINconnector supports PC/AT
standard keyboard and PS/2 mouse.
USBconnectors: Dual USB connectors onboard
Battery: Lithium battery for
WatchdogTimer: Can generate a system reset, IRQ15 or NMI. Supports
Win95, Win3.1. Software selectable timeout interval (1 sec. ~ 255 sec.,
1sec./step).
DMAchannels:7
Interruptlevels:15

Chapter 1 General Information 5
Powermanagement: I/O peripheral devices support power saving and doze/
standby/suspend modes. APM 1.2 compliant.
PC/104connector: 104-pin connector for a 16-bit bus
Ethernet interface
Chipset:RealtekRTL8139A100/10Base-TxFast Ethernet controller.
Ethernetinterface: Onboard 100/10 Base-T RJ-45 connector.
Flat panel VGA interface
Chipset:C&T69000
Displaymemory:2MB SDRAM built inChip
Displaytype:SupportsCRT and flatpanel(TFT, DSTN, MONO and EL)
display. Can display both CRT and flat panel simultaneously.
Resolution: Supports up to 1024x768@64K colors.
SSD interface
One 32-pin DIP socket supports M-System DiskOnChip 2000 series, memory
capacity from 2 MB to 144 MB

6SBC-556/L User Manual
Mechanical and environmental
Powersupplyvoltage:+5V(4.75Vto5.25V),
+12V (11.75Vto12.25V)
PowerRequirement:
Bare Bone power consumption: +5V @ 1.5A
PowerRequirement(withPentiumMMX): +5V @ 6A
PowerRequirement (withK6-233):+5V@10A
Operatingtemperature:32to 140OF(0 to 60OC)
Boardsize:7.3"(L)x4.8"(W)(185mmx122mm)
Boardweight: 1.32lb.(0.6 Kg)

Chapter 1 General Information 7
Board layout


























5582
SIS





B69000
CHIPS
Winbond
BAT
DiskOnChip

8SBC-556/L User Manual
Card dimensions
185.00
178.00
122.00
98.50 19.50
D4x4

Chapter 2 Installation 9
2
Installation
This chapter explains set-up procedures
fortheSBC-556/Lhardware,including
instructions on setting jumpers and
connecting peripherals, switches, and
indicators. Be sure to read all safety
precautions before you begin the installa-
tion procedure.
CHAPTER

10 SBC-556/L User Manual
Jumpers and connectors
Connectors on the board link it to external devices such as hard
disk drives, keyboard, or floppy drives. In addition, the board has a
number of jumpers that allow you to configure your system to suit
your applications.
The table below lists the function of each of the jumpers and
connectors:
Jumpers
Label Function
JP1 CPU clock ratio
JP2 LCD driving voltage select
JP3 RS-232/422/485 select (COM2)
JP4 CPU VIO voltage setting
JP5 IR connector (Reserved)
JP6 CPU external clock select
JP7 CPU Vcore voltage select
JP8 DOC address select
JP9 Ethernet RX signal LED connector
JP10 Ethernet Linkage signal LED connector
JP11 Externet TX signal LED connector
JP12 Clear CMOS data

Chapter 2 Installation 11
connector
Label Function
CN1 LCD inverter power connector
CN2 Powe LED & keylock connector
CN3 IDE LED connector
CN4 Hardware reset connector
CN5 IDE hard drive connector
CN6 Fan power connector
CN7 Floppy drive connector
CN8 Parallel (Printer) port connector
CN9 LCD panel connector
CN10 RS-232/422/485 connector (COM2)
CN11 USB connectors (dual-port)
CN12 Ethernet connector
CN13 Power connectors (P8 & P9)
CN14 COM1 connector
CN15 VGA connector
CN16 External Keyboard connector
CN17 KB & PS/2 mouse connector

12 SBC-556/L User Manual
Locating jumpers and connectors






























5582
SIS





B69000
CHIPS
Winbond
BAT
DiskOnChip
CN8
CN11
CN10
JP2
CN7
CN9
CN5
CN2
CN3
CN1
CN4
JP12
CN6
JP1
JP4
JP6
JP7
JP8
CN17
CN16
JP3
JP5
CN12 CN13
CN14 CN15
JP9
JP11
JP10