ABB FSE-31 User manual

Options for ABB drives
Quick guide
FSE-31 pulse encoder interface module
Wiring instructions
Wire the safety pulse encoder to the FSE-31 module as shown in this
figure.
Note: This figure applies to the FSE-31 module revision F or later. Make
sure you connect the safety encoder according to this figure. You can
see the revision of the module in the type designation label.
1
1
0
VCC 0V
2
FSE-31
B+
B-
Z+
Z-
SHLD
2
0
3
4
5
6
7
8
A-
A+
9
X31
Encoder
COM_ENC
VCC_ENC
2
1

For more information, see FSE-31 pulse encoder interface module
user’s manual (3AXD50000016597 [English]) and FSO-21 safety
functions module user’s manual (3AXD50000015614 [English]).
FSE-31 user’s manual FSO-21 user’s manual
3AXD50000050593 Rev A
Effective: 2017-03-31
2017 ABB Oy. All rights reserved.