ABB M2305 User manual

VER:1.3 ││28.04.2017
ABB-Welcome
Pos: 2 /D inA 4 - A nl eitun gen Online /Inh al t/K NX/ Doo rEntry /832 20-AP - xxx /Tit elbl at t - 832 20-A P-xxx - AB B @ 1 9\m od_ 132 3249 806 476 _15. docx @ 11 108 4 @ @ 1
M2305
Switch actuator
===E nde der List e für Textma rkeC over == =

ABB
-Welcome
| — 2 —
Pos: 4 /B usc h-J a ege r(N eust ruk t ur)/ Modul -St rukt u r/Onli ne-D oku ment ati on /Inh alts ve rzeich ni s ( --> Fü r alle Doku men te <-- )/In hal tsve rzei c hnis @ 19\ mod _13 206 490 4438 6_1 5.d ocx @ 109 653 @ @ 1
1Safety.......................................................................................................3
2Intended use.............................................................................................3
3Environment..............................................................................................3
3.1 ABB devices.............................................................................4
4Operation..................................................................................................5
4.1 Control elements.......................................................................5
4.2 Operatingmodes ......................................................................6
4.2.1 Call repetition............................................................................6
4.2.2 Door opener..............................................................................7
4.2.3 Time relay.................................................................................8
5Technical data.........................................................................................10
6Mounting/Installation ...............................................................................11
6.1 Requirements for the electrician...............................................11
6.2 General installation instructions...............................................12
6.3 Mounting.................................................................................12
===E nde der Liste für Tex tmarke TOC == =

ABB
-Welcome
| — 3 —
Pos: 6 /B usc h-J a ege r(N eust ruk t ur)/ Modul -St rukt u r/Onli ne-D oku ment ati on /Übe rschri ften (--> Für alle D ok ument e < --)/ 1. Eb ene/S - T /Si cher heit @ 18\ mod _13 026 127 917 90_ 15.d ocx @ 103 357 @ 1 @1
1Safety
Pos: 7 /B usc h-J a ege r(N eust ruk t ur)/ Modul -St rukt u r/Onli ne-D oku ment ati on /Si cher heit (--> Für al le Dok um ente <--)/Wa rn hi nweis e /Si cher heit - 23 0 V @ 18\m od_ 130 260 681 675 0_15 .docx @ 1 033 08 @ @ 1
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or
indirect contact with live components.
This can result in electric shock, burns or even death.
■Disconnect the mains power supply prior to installation and/or
disassembly!
■Permit work on the 110-240 V supply system to be performed only by
specialist staff!
Pos: 8 /B usc h-J a ege r(N eust ruk t ur)/ Modul -St rukt u r/Onli ne-D oku ment ati on /Übe rschri ften (--> Für alle D okum ent e < --)/ 1. Eb ene/A - F /Bes tim mun gsge mä ßer Geb rau ch @ 18\ mod _13 027 6332 131 6_1 5.do cx @ 1034 83 @ 1 @ 1
2Intended use
Pos: 9 /D inA 4 - A nl eitun gen Online /Inh al t/K NX/ Doo rEntry /832 20-A P- xxx /Bes ti mmu ngsg em aesse r Ge bra uch - 83 220 -AP -xxx- 500 @ 2 0\mo d_1 324 561 168 699 _15. docx @ 11 272 8 @ @ 1
This device is an integral part of the ABB-Welcome door communication system and
operates exclusively with components from this system. This device can be mounted
easily inside flush-mounted box.
Pos: 10 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Übe rsch ri fte n ( --> Fü r all e D oku men te < --)/1. E bene /U - Z/U mwelt @ 18\ mod _13 026 141 5896 7_1 5.d ocx @ 103 383 @ 1 @ 1
3Environment
Pos: 11 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Umw el t ( --> F ür all e Dok u me nte <-- )/Hinw eis e/H inw ei s - U mwel t - H inwei s E lektr oge räte @ 1 8\mo d_1 302 763 973 434 _15. docx @ 10 350 0 @ @ 1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with
domestic waste.
– The device contains valuable raw materials which can be recycled.
Therefore, dispose of the device at the appropriate recycling
facility.

ABB
-Welcome
| — 4 —
Pos: 12 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/2 . /AB B Gera ete @ 19 \mo d_1 323 162 843 832_ 15. docx @ 11 087 5 @ 2 @ 1
3.1 ABB devices
Pos: 13 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Umw el t ( --> F ür all e Dok u me nte <-- )/Hinw eis e/H inw ei s - U mwel t - A BB E lektro ger äte @ 19\ mo d_1 3231 627 458 39_ 15.d ocx @ 110 867 @ @ 1
All packaging materials and devices from ABB bear the markings and test seals for
proper disposal. Always dispose of the packaging material and electric devices and their
components via an authorized recycling facilities or disposal companies.
ABB products meet the legal requirements, in particular the laws governing electronic
and electrical devices and the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG)
No.1907/2006)

ABB
-Welcome
| — 5 —
Pos: 18 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/1 ./ Bedie nun g @ 18\m od_ 130 261 392 416 5_15 .docx @ 1 033 65 @ 1 @ 1
4Operation
Pos: 19 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/2 . /Nor male r B et rieb @ 18 \ mod_1 302 768 8209 65_ 15. docx @ 10 3540 @ 2 @ 1
4.1 Control elements
Pos: 20 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/3 . /Bedi e nele men te @ 20\ mod _13 232 6022 055 9_1 5.do cx @ 1 116 47 @ 3@ 1
Pos: 21 /D i nA 4 - A nlei tu ngen Onl in e/In hal t/KN X/D o orEnt ry/ 83 220 -AP -xxx/B e dienel eme nte - 8 322 0-AP -xxx @ 18\ mo d_1 3032 128 536 05_ 15.d ocx @ 103673 @ @ 1
Fig. 1: Overview of control buttons
No. Functions
1Terminal resistor ON/OFF
In video installations or audio- and video-combined installations, the switch
must be set as “RC on” on the last device of the line.
2For operating the mode switchover button, See chapter “Operating
Modes.”
3Rotary switches for addressing (001-199)
4Bus in/out
5 Connection with pushbutton (e.g.exit button, doorbell)
6 Adjust relay switching time
7Floating output for door opener or light
Pos: 22 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Steu er mod ul e - O nlin e-Dok ume ntati on ( -- > Für alle Dok ume nte <- -)/ +++ ++ +++++ ++ S ei ten umb ruch + +++ ++++ +++ + @ 9\ mod_ 126 8898 668 093 _0. docx @ 521 49 @ @ 1

ABB
-Welcome
| — 6 —
Pos: 26 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/2 ./ Bedie nak ti onen @2 0\ mod_ 1323 262 294 281 _15. docx @ 11 191 1 @ 2 @ 1
4.2 Operating modes
Pos: 71 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/3 . /Absc hl ussw ide rsta nd @ 19\ mod _13 219 5807 990 6_1 5.do cx @ 1100 83 @ 3 @ 1
Pos: 72 /D i nA 4 - A nlei tu ngen Onl in e/In hal t/KN X/D o orEnt ry/ Bedie nun g/ Absc hl ussw ide rsta nd s et zen 83 220 -A P-xx x @ 19\ mod _13 1072 339 236 9_1 5.do c x @ 1 078 41 @ @ 1
4.2.1 Call repetition
Fig. 2: Call repetition
No. Functions
12->OFF, 3->OFF
Pos: 74 /D i nA 4 - A nlei tu ngen Onl in e/In hal t/KN X/D o orEnt ry/B edie nun g/M as te r/Sl ave Sc halte r s etz en 832 20-A P-xx x @ 1 9\ mod_1 310 723 320 966 _15. docx @ 10 783 3 @ @
The device is enabled for an incoming call to control an external bell or light.
The device is disabled after the call is answered or after a customized time-out (ranging
from 1 to 30 seconds).
The address of the switch actuator is equal to that of an indoor station in the same
apartment.
2
3
DIP
1

ABB
-Welcome
| — 7 —
4.2.2 Door opener
Fig. 3: Door opener
No. Functions
12->OFF, 3->ON
Pos: 74 /D i nA 4 - A nlei tu ngen Onl in e/In hal t/KN X/D o orEnt ry/B edie nun g/M as te r/Sl ave Sc halte r s etz en 832 20-A P-xx x @ 1 9\ mod_1 310 723 320 966 _15. docx @ 10 783 3 @ @
The device is enabled by pressing the unlock button on indoor stations/guard units,
which releases a connected lock.
The device is disabled after a customized time-out (ranging from 1 to 10 seconds).
The address of the switch actuator is equal to that of an outdoor station in the same
sub-system.
2
3
DIP
1

ABB
-Welcome
| — 8 —
4.2.3 Time relay
Fig. 4: Release a lock
No. Functions
12->ON, 3->OFF
Pos: 74 /D i nA 4 - A nlei tu ngen Onl in e/In hal t/KN X/D o orEnt ry/B edie nun g/M as te r/Sl ave Sc halte r s etz en 832 20-A P-xx x @ 1 9\ mod_1 310 723 320 966 _15. docx @ 10 783 3 @ @
The device is enabled by pressing the program button on indoor stations/guard units or
a light button on outdoor stations in the same sub-system which releases a connected
lock or switches on the light.
The device is disabled after a customized time-out (ranging from 1 second to 5 minutes).
If an indoor station/a guard unit is used to control the switch actuator, the address of the
program button is equal to that of the switch actuator, which can be set from 001 to 199
in the same sub-system.
Pos: 75 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Steu er mod ul e - O nlin e-Dok ume ntati on ( -- > Für alle Dok ume nte <- -)/ +++ ++ +++++ ++ S ei ten umb ruch + +++ ++++ +++ + @ 9\ mod_ 126 8898 668 093 _0. docx @ 521 49 @ @ 1
2
3
DIP
1Programming first!

ABB
-Welcome
| — 9 —
If an outdoor station is used to control the switch actuator, the address of the
switch actuator is equal to that of the outdoor station.
Fig. 5: Switch on a light
Pos: 75 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Steu er mod ul e - O nlin e-Dok ume ntati on ( -- > Für alle Dok ume nte <- -)/ +++ ++ +++++ ++ S ei ten umb ruch + +++ ++++ +++ + @ 9\ mod_ 126 8898 668 093 _0. docx @ 521 49 @ @ 1

ABB
-Welcome
| — 10 —
Pos: 76 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/1 . /Tec hnisc he D aten @ 18 \mo d_1 302 615 863 001 _15. docx @ 10 341 6 @ 1 @ 1
5Technical data
Pos: 77 /D i nA 4 - A nlei tu ngen Onl in e/In hal t/KN X/D o orEnt ry/83 220 -A P-x xx/ Tech nis che D ate n - 832 20-A P-x xx @ 1 8\m od_ 130 321 285 4559 _15 .doc x @ 1 037 05 @ @ 1
Designation Value
Operating temperature -25 ℃- +55 ℃
Protection
(with flush-mounted box) IP 30
Single-wire clamps 2 x 0.28 mm² - 2 x 0.75 mm²
Fine-wire clamps 2 x 0.28 mm² - 2 x 0.75 mm²
Floating output for light 100-240 V AC, 3 AX
Bus voltage 30 V AC/DC; 3 A
Size 20-30 V
Pos: 78 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Steu er mod ul e - O nlin e-Dok ume ntati on ( -- > Für alle Dok ume nte <- -)/ +++ ++ +++++ ++ S ei ten umb ruch + +++ ++++ +++ + @ 9\ mod_ 126 8898 668 093 _0. docx @ 521 49 @ @ 1

ABB
-Welcome
| — 11 —
Pos: 79 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Übe rsch ri fte n ( --> Fü r all e D oku men te < --)/1. E bene /M - O/ Mont age / Ins tal latio n @ 18\ mod _13 0261 396 611 1_1 5.do cx @ 1 033 73 @ 1 @ 1
6Mounting/Installation
Pos: 80 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Si che rheit (--> Fü r all e D oku ment e < --) /War nhi nweis e/S iche rheit - Nie ders pan nun gs - und 230 V -Leit ung en @ 18\mod _13 026 178 214 91_1 5.d oc x @ 103 465 @ @ 1
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or
indirect contact with live components.
This can result in electric shock, burns or even death.
■Disconnect the mains power supply prior to installation and/or
disassembly!
■Permit work on the 110-240 V supply system to be performed only by
specialist staff!
Pos: 81 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Si che rheit (--> Fü r all e D oku ment e < --) /War nhi nweis e/S iche rheit - Fachk enn tni sse @ 18 \mo d_1 302 774 384 017_ 15. docx @ 10356 4 @ 2 @ 1
6.1 Requirements for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
• Incorrect installation endangers your life and that of the user of the
electrical system.
• Incorrect installation can cause serious damage to property, e.g.
due to fire.
The minimum necessary expert knowledge and requirements for the
installation are as follows:
• Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect from power.
2. Secure against being re-connected.
3. Ensure there is no voltage.
4. Connect to earth.
5. Cover or barricade adjacent live parts.
• Use suitable personal protective clothing.
• Use only suitable tools and measuring devices.
• Check the type supply network (TN system, IT system, TT system)
to secure the following power supply conditions (classic connection

ABB
-Welcome
| — 12 —
to ground, protective earthing, necessary additional measures,
etc.).
Pos: 82 /D i nA 4 - A nlei tu ngen Onl in e/In hal t/KN X/D o orEnt ry/M onta ge/ Mont age hinw eis e - A llg emei n @ 1 9\m od_ 131 056 367 047 8_15 .docx @ 1 077 43 @ 2@ 1
6.2 General installation instructions
• Terminate all branches of the wiring system via a connected bus device (e.g.,
indoor station, outdoor station, system device).
• Do not install the system controller directly next to the bell transformer and other
power supplies (to avoid interference).
• Do not install the wires of the system bus together with 100-240 V wires.
• Do not use common cables for the connecting wires of the door openers and wires
of the system bus.
• Avoid bridges between different cable types.
• Use only two wires for the system bus in a four-core or multi-core cable.
• When looping, never install the incoming and outgoing bus inside the same cable.
• Never install the internal and external bus inside the same cable.
6.3 Mounting
Pos: 85. 1 / DinA 4 - A nleit ung en O nli ne/I nhal t/K NX /DoorE ntry/ 832 20-A P-x xx /Mo nta ge - Mo dul e/ Mon tag e - Mon tage dos e -- 83 220 -A P-x xx @ 19\mod _132 325 040 684 8_1 5.doc x @ 1 110 98 @ @ 1
Mounted with a flush-mounted box

ABB
-Welcome
| — 13 —
Pos: 83 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Steu er mod ul e - O nlin e-Dok ume ntati on ( -- > Für alle Dok ume nte <- -)/ +++ ++ +++++ ++ S ei ten umb ruch + +++ ++++ +++ + @ 9\ mod_ 126 8898 668 093 _0. docx @ 521 49 @ @ 1

ABB
-Welcome
Pos: 95 /D i nA 4 - A nlei tu ngen Onl in e/In hal t/KN X/D o orEnt ry/ Proj ek tier ung -M erkbl att/P r ojekt ie rPos : 9 7 /Bus c h-Ja ege r (N eust rukt u r)/Mo dul -Str uktu r/O nli ne-D oku ment ati on /Rücks eit en (--> Für al le Dok um ente <- -)/R üc kseit e - Bus ch-J aeg er -A ll gemei n @ 20\ mod _13 273 200 748 86_1 5.d ocx @ 137 103 @ @ 1
Notice
===E nde der Lis te für Textma rk e Ba ck cove r = ==
We reserve the right to make technical changes at any time as well as changes in the
content of this document without prior notice.
The detailed specifications agreed to at the time of ordering apply to all orders. ABB
accepts no responsibility for possible errors or incompleteness in this document.
We reserve all rights to this document and the topics and illustrations contained therein.
The document and its contents, or extracts thereof, must not be reproduced, transmitted
or reused by third parties without prior written consent by ABB.