ABB 83350-500 User manual

V1.0 │ 01 │ 20.10.2015
ABB-Welcome
Pos: 2/ Busch-Ja eger( Neustruktur)/M odul-Stru ktur/Online-Dokum entation/Titel blätter/Dimm er/Titelblatt - 65 91U -101 -- ABB @ 23\mod_133308 8838540_1 5.docx @ 2 07025 @ @ 1
Telephone gateway
83350-500
=== Ende der List ef ürTextmar keC over ===

ABB-Welcome
—2 —
Pos: 4/ Busch-Jaeger (Ne ustruktur)/M odul-Struktur/Online-D okumentation/In haltsverzeichnis (--> Für alle Doku mente< --)/Inhaltsverz eichnis @ 19\mod_1320649 044386_15.docx @ 109653 @ @ 1
1Safety.......................................................................................................................................................................3
2Environment.............................................................................................................................................................3
2.1 Disposal..................................................................................................................................................3
3Technical data..........................................................................................................................................................4
4General function.......................................................................................................................................................5
4.1 Glossary..................................................................................................................................................5
4.2 Functioning .............................................................................................................................................5
5Connection...............................................................................................................................................................6
5.1 Integration of the Telephone gateway in your telephone system ............................................................6
5.2 Device overview......................................................................................................................................7
6Mounting / Installation..............................................................................................................................................8
6.1 Requirements for the electrician .............................................................................................................8
6.2 Mounting.................................................................................................................................................8
6.3 System security.......................................................................................................................................8
7Commissioning ........................................................................................................................................................9
7.1 Commissioning via telephone.................................................................................................................9
8Operation...............................................................................................................................................................11
9Tones for indication................................................................................................................................................13
10 Appendix................................................................................................................................................................14
10.1 Frequently-used commisioning .............................................................................................................14
10.2 Main commands of operation................................................................................................................14
=== Ende der Liste fürT extmarke TOC == =

ABB-Welcome
Safety
—3 —
Pos: 6/ Busch-Ja eger( Neustruktur)/M odul-Stru ktur/Online-Dokum entation/Überschrift en (--> Füralle Do kumente <--)/1. Ebene/S - T/Sicherh eit@ 18\mod _1302612791790_15. docx @ 103357@ 1 @ 1
1 Safety
Pos: 7/ Busch-Jaeger (Neus truktur)/Modul-Str uktur/Online-Doku mentation/Sicherheit (--> F üralle Do kumente <--)/Warnhin weise/Sicherheit - 230 V @ 18\mod_13026 06816750_15.doc x@ 103308 @ @ 1
Warning
Electric voltage!
Risk of death and fire due to electric voltage of 230 V.
–Work on the 230V supply system may only be performed by authorised electricians!
–Disconnect the mains power supply prior to installation and/or disassembly!
Pos: 8/ Busch-Ja eger( Neustruktur)/M odul-Stru ktur/Online-Dokum entation/Überschrift en (--> Füralle Do kumente <--)/1. Ebene/U - Z/Um welt@ 18\m od_13026141589 67_15.docx @ 103383 @ 1@ 1
2 Environment
Pos: 9/ Busch-Ja eger( Neustruktur)/M odul-Str uktur/Onlin e-Dokumen tation/Umw elt( --> Für alle Dokume nte< --)/Hinweise/Hin weis- Um welt- Hi nweisEl ektrogeräte@ 1 8\mod_1302763973 434_15.docx @ 103500 @ @ 1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with domestic waste.
–The device contains valuable raw materials which can be recycled. Therefore, dispose of the
device at the appropriate collecting depot.
Pos: 10 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation /Überschriften (--> Für alleD okument e<--) /2. Ebene/A- F /Entsorgung @ 20\mod_ 1325760636580_15.d ocx @ 136573 @ 2@ 1
2.1 Disposal
Pos: 11 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/U mwelt (--> Für alleD okum ente<--) /Hinweise/Hin weis -U mwelt - Entsorgung El ektrogeräte@ 2 0\mod_13257 60695972_15.doc x@ 136 583 @ @ 1
All packaging materials and devices bear the markings and test seals for proper disposal. Always dispose of the
packaging material and electric devices and their components via the authorized collecting depots and disposal
companies.
The products meet the legal requirements, in particular the laws governing electronic and electrical devices and
the REACH ordinance.
(EU Directive 2002/96/EC WEEE and 2002/95/EC RoHS)
(EU REACH ordinance and law for the implementation of the ordinance (EC) No.1907/2006)
Pos: 12 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F üralle Do kumente <--)/+++++ +++++++ Seitenumbruch ++++++ ++++++ @ 9\mod_12688 98668093_0.docx @ 52149 @ @ 1

ABB-Welcome
Technical data
—4 —
Pos: 13 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation /Überschriften (--> Für alleD okument e<--) /1. Ebene/S- T /Technische Daten @ 11\ mod_1279185386320_1 5.docx@ 8 3019 @ 1@ 1
3 Technical data
Pos: 14 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation /Technische Daten/Di mmer/Technisc heD aten - 6591 U-101 @ 23\mo d_133308908528 0_15.docx @ 207039 @ @ 1
General
Single-wire clamps
2 x 0,28 mm²–2 x 0,75 mm²;
Fine-wire clamps
2 x 0,28 mm²–2 x 0,75 mm²;
Telephone line clamps
0.2 mm²-1,5 mm²
Bus voltage
28 V- ±2 V
Size
4 TE
Protection
IP20
Operating temperature
-25 °C –+55 °C
Size
90 x 72 x 65 mm
Pos: 15 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Online-D okumentation (--> F üralle Do kumente <--)/+++++ +++++++ Seitenumbruch +++++++ +++++ @ 9\mod_12688 98668093_0.docx @ 52149 @ @ 1

ABB-Welcome
General function
—5 —
Pos: 21 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation /Überschriften (--> Für alleD okument e<--) /1. Ebene/A- F /Funktion @ 18\mod_1 308560693057_15.doc x@ 106 869@ 1 @ 1
4 General function
Pos: 22 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Dokumentati on/Überschriften (--> Für alle Doku mente<--) /2. Ebene/G - L/Lastarten @ 20\mod_1 326269704379_15. docx@ 1 36905@ 2 @ 1
The 83350 Telephone gateway is part of the ABB-Welcome door communication system and operates exclusively with
components from this system.
The product serves for connecting a telephone system to the ABB-Welcome system, so that the connected telephones
will act as audio Indoor stations.
To use the Telephone gateway, it is necessary to configure the device as an analogue subscriber of your telephone
system.
4.1 Glossary
1. Default phone number: when Default phone number is activated,call for all Indoor stations will be redirected
to this Default phone number.
2. Primary and Secondary phone number: when Primary or Secondary phone number is activated for an
Indoor station, calls for this Indoor station will be redirected to this Primary or Secondary phone number. It is
possible to toggle between these two numbers.
3. Direct-accept: When this function is activated, a user can answer a door call directly by picking up the
handset. If deactivated, the user has to press the keys [1] [#] after picking up the handset. If other Indoor
stations than the Telephone gateway itself are installed in an apartment, the direct accept function has to be
deactivated.
4. Admin PIN: this PIN is used as an administrator password to access the programming mode of the
Telephone gateway where the Default phone number, Direct-accept feature etc, can be set. It’s suggested
that only the administrator to know this PIN.
5. Master PIN: this PIN is used to activate/deactivate the Default phone number for all Indoor stations. It’s
suggested that e.g. the receptionist of a company to know this PIN.
6. Indoor Station PIN: this PIN is used as an enduser password to protect your Telephone gateway from
misuse or unauthorized access e.g. toggling between Primary and Secondary phone number or calling an
Outdoor station to open the door. This PIN has to be activated if this additional security level is required.
Default admin PIN
Default master PIN
Default Indoor station PIN
1234
0000
1111
4.2 Functioning
The Telephone gateway is an analogue subscriber of your telephone system. The device includes a telephone
book, in which every Indoor station address (bell button) is linked to up to two telephone numbers (Primary and
Secondary number). Additionally a Default phone number can be programmed. When the Default phone number
is activated,calls for all Indoor stations will be redirected to this default phone number.
The telephone book can contain internal or external numbers.
Indoor station address
(bell button)
Telephone number 2
(Primary phone number)
Telephone number 3
(Secondary phone number)
01
9764
00493895555
02
0389364860
03
00493896666
1220
…
…
…
Pos: 24 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F üralle D okumente <--)/+++++ +++++++ Seitenumbruch +++++++ +++++ @ 9\mod_12688 98668093_0.docx @ 52149 @ @ 1

ABB-Welcome
Connection
—6 —
Pos: 25 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation /Überschriften (--> Für alleD okument e<--) /2. Ebene/G- L/Kombinationsmöglichkeiten @ 19\mo d_1320312769153_ 15.docx @ 109520 @ 2 @ 1
Pos: 30 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation /Überschriften (--> Für alleD okument e<--) /1. Ebene/A- F /Anschluss @ 19\mod_1 309248278435_15.doc x@ 1 07413 @ 1@ 1
5 Connection
Pos: 31 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation /Anschluss/Dim mer/Anschluss - 6591 U-1 01@ 2 3\mod_13330939 20008_15.doc x@ 20 7132 @ @1
Fig.
1
No.
Function
1
Terminals for ABB-Welcome system
2
Terminals (Telephoneline clamps) for Private Branch Exchange (PBX) in telephone system
Note
The Telephone gateway is always set as master. The related Indoor stations in the same
appartment have always to be set as slave (Please refer to the operating manual of the Indoor
stations.).
5.1 Integration of the Telephone gateway in your telephone system
The procedure of integrating the Telephone gateway into your system depends on the telephone system and can
vary. Please refer to the topic “Integration of analogue subscribers” in the manual of your telephone system.
The integration of the Telephone gateway is succsessfull, if it can be called by other participants and can call
others by itself.
Note
System security
Avoid misuse by intruders and configure your telephone system in a way, that the
Telephone gateway can not directly be called from an external telephone. This will prevent
unauthorised access of intruders.
If it is necessary to have external access to the Gateway, please activate the Indoor station PIN
(See Page 9).
Pos: 32 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F üralle D okumente <--)/+++++ +++++++ Seitenum bruch+ ++++++++ +++ @ 9\mod _1268898668093 _0.docx @ 521 49@ @

ABB-Welcome
Connection
—7 —
5.2 Device overview
Fig.
2
No.
Function
1
Operation status of connection to PBX
Connected to PBX (idle or ongoing call)
: a. Ringing
2
Operation status of ABB-Welcome bus
: Ready for operation. Bus voltage is applied.
: a. Receiving data
1+2
: Reset to factory defaults ongoing
3
USB port for software update (can be done only in the factory).
4
In pure audio installations the terminal resistor must always be deactivated ('OFF'). In video installations or
mixed audio and video installations the terminal resistor must be activated on the last device of a branch
('ON').
5
Long-press 3s to reset the device to factory settings. Both LEDs will flash, if reset function is performed.
Below are the original factory settings:
Master PIN: 0000
Admin PIN: 1234
Indoor station PIN: 1111
Direct-accept: OFF
Default phone number: empty
Primary phone number: empty
Secondary phone number: empty
Call diverted to Default phone number: OFF
Indoor station PIN required: OFF

ABB-Welcome
Mounting / Installation
—8 —
6 Mounting / Installation
Pos: 34 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/Sich erheit (--> Für alle Dokum ente <--)/Warnhinweis e/Sicherheit - Nieders pannungs- und 23 0 V-Leitungen @ 18\ mod_130261782149 1_15.docx @ 10346 5@ @ 1
Warning
Electric voltage!
Risk of death and fire due to electric voltage of 230 V.
–Low-voltage and 230 V cables must not be installed together in a flush-mounted socket!
In case of a short-circuit there is the danger of a 230 V load on the low-voltage line.
Pos: 35 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/Sich erheit (--> Für alle Dokumente <--) /Warnhinweise/Sich erheit- Vorgeschaltete Sicheru ng abschalten @ 20\ mod_1326441711 467_15.docx @ 137 043 @ @ 1
Warning
Electric voltage!
The upstream fuse must be disconnected when working on the lighting system.
Pos: 36 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/Sich erheit (--> Für alle Dokumente <--) /Warnhinweise/Sich erheit- Fac hkenntnisse @ 18\mod_130 2774384017_15.doc x@ 1 03564 @ 2@ 1
6.1 Requirements for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering knowledge and experience.
•Incorrect installation endangers your life and that of the user of the electrical system.
•Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation are as follows:
•Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect the power;
2. Secure against being reconnected;
3. Ensure there is no voltage;
4. Connect to earth;
5. Cover or barricade adjacent live parts.
•Use suitable personal protective clothing.
•Use only suitable tools and measuring devices.
•Check the type of supply network (TN system, IT system, TT system) to secure the following
power supply conditions (classic connection to ground, protective earthing, necessary
additional measures, etc.).
Pos: 37 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation /Überschriften (--> Für alleD okument e<--) /2. Ebene/M - O/M ontage @ 18 \mod_1302615 960458_15.docx @ 103424 @ 2 @ 1
6.2 Mounting
Pos: 38 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation /Montage/alle Geräte/Montage - UP-Dosen -D IN 49073-1 oder geeign etes Aufputzgehaeuse - Ohne Doc variable @ 20\mod_1325766 034453_15.docx @ 136593 @ @ 1
The device must only be installed on mounting rails according to DIN EN 50022.
6.3 System security
Avoid misuse by intruders and configure your telephone system in a way, that the Telephone gateway can not
directly be called from an external telephone. This will prevent unauthorised access of intruders.
If it is necessary to have external access to the Gateway, please activate the Indoor station PIN (See Page 9).
Pos: 39 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F üralle Do kumente <--)/+++++ +++++++ Seitenumbruch +++++++ +++++ @ 9\mod_12688 98668093_0.docx @ 52149 @ @ 1

ABB-Welcome
Commissioning
—9 —
Pos: 40 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation /Überschriften (--> Für alleD okument e<--) /1. Ebene/G - L/Inbetrie bnahme @ 11\mod _1279185496977 _15.docx @ 83035 @ 1 @ 1
7 Commissioning
Pos: 41 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation /Inbetriebnahm e/Dimmer/Inbetrieb nahme - 6591 U-101 @ 1 9\mod_13119487 81023_15.docx @ 108 300 @ 222 @ 1
The following components are required to operate the Telephone gateway:
- ABB-Welcome door communication system including the System controller and at least one Outdoor station.
- A PBX with analogue input
- At least one telephone for configuring via DTMF
For the initial startup of the Telephone gateway, a few basic settings need to be made.
Two options are available for commissioning:
1. Via telephone, connected to the system
2. Via Internet browser and IP-Gateway 83342-xxx. To configure the Telephone gateway via the IP-Gateway,
please see the manual of the IP Gateway.
7.1 Commissioning via telephone
1. Call the Telephone gateway via your PBX
2. Enter Admin PIN
No.
Function
Command
Example or explanation
1
Enter Admin PIN
[*] [*] [*] Admin PIN [#]
The default Admin PIN is 1234
3. If the Admin PIN is correct, the Telephone gateway enters the programming mode and the settings can be done as
followed:
No.
Function
Command
Example or explanation
1
Set Default phone
number
[7] [3] [6] [*] Default phone number [#]
2
Add a new Indoor
station to phonebook
[2] [4] [7] [*] Indoor station number [#]
The Indoor station number can be 1
(or 01) to 250.
3
Add a range of Indoor
stations phone book
[2] [4] [7] [7] [*] Indoor station number 1 [*]
Indoor station number 2 [#]
Indoor station number 2 must always be
greater than Indoor station number 1.
4
Add or change Primary
and Secondary phone
number
[2] [*] Indoor station number [*] Primary phone
number [*] Secondary phone number [#]
5
Add or change Primary
phone number in the
phonebook
[2] [*] Indoor station number [*] Primary phone
number [#]
To be used if the user does not use
Secondary phone number
6
Activate “Direct-accept”
feature
[7] [3] [2] [1] [#]
7
Deactivate “Direct-
accept” feature
[7] [3] [2] [0] [#]
If there are Indoor stations in system, this
function should be activated.
8
Set New Admin PIN
[7] [*] [*] [*] New Admin PIN [*] [*] [*]
New Admin PIN [#]
9
Set New Master PIN
[7] [*] [*] New Master PIN [*] [*] +
New Master PIN [#]
10
Activate mandatory
usage of Indoor station
PIN
[7] [4] [7] [1] [#]
11
Deactivate mandatory
usage of Indoor station
PINs
[7] [4] [7] [0] [#]

ABB-Welcome
Commissioning
—10 —
12
Set New Indoor station
PINs
[*] Indoor station Number [*] [7] [*]
New Indoor station PIN [*]
New Indoor station PIN [#]
13
Set Telephone gateway
Identifier for
programming via IP-
Gateway and PC.
[7] [4] [3] [*] Identifier [*] Identifier [#]
Identifier should be an integer from 1 to
99, and has to be unique.
14
Reset to Factory Setting
[7] [3] [7] [8] [*] Admin PIN [#]
Pos: 42 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Online-D okumentation (--> F üralle Do kumente <--)/+++++ +++++++ Seitenumbruch +++++++ +++++ @ 9\mod_12688 98668093_0.docx @ 52149 @ @ 1

ABB-Welcome
Operation
—11 —
Pos: 43 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation /Überschriften (--> Für alleD okument e<--) /1. Ebene/A- F /Bedienung @ 11\mod_12 79185541649_15.d ocx@ 8 3043@ 1 @ 1
8 Operation
Pos: 44 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation /Bedienung/Di mmer/Bedienung - 65 91U- 101 @ 23\mod_13 33091293158_15. docx @ 207069 @ @ 1
After Programming, users can use a telephone to call the Telephone gateway.
When there is a call-in from Outdoor station, and telephone is in normal standby:
No.
Function
Command
Example or explanation
1
Accept Call-in
[1] [#]
Commands below can be done via telephone when there is ongoing conversation between Outdoor station and
telephone:
No.
Function
Command
Example or explanation
1
Open default lock
[3] [#]
Open default lock of Outdoor station
2
Open the 2nd lock
[2] [#]
Open the 2nd lock of Outdoor station
3
Control Switch actutor
[5] [1] [#] to [5] [199] [#]
When there is no ongoing conversation between Outdoor station and telephone, user calls the Telephone
gateway, then
1. When Call Divert to Default phone number is activated, the telephone will play “Calls are diverted” tone;
2. When Call Divert to Default phone number is deactivatedd, the telephone will play “Calls are not diverted” tone.
3. Settings below can be done via telephone:
No.
Function
Command
Example or explanation
1
Call Outdoor station
[1] [1] [#] to [1] [9] [#] or [1] [#]
[1] [1] [#] to [1] [9] [#] to call a special
Outdoor station
[1] [#] will call Outdoor station 1
2
Call Outdoor station when
Indoor station PIN is must
[*] Indoor station number [*]
Indoor station PIN [*] [1] [1] [#] to [1] [9] [#]
or [*] Indoor station number [*]
Indoor station PIN [*] [1] [#]
3
Call the last call-in Outdoor
station
[1] [0] [#]
4
Call the last call-in Outdoor
station when Indoor station
PIN is must
[*] Indoor station number [*]
Indoor station PIN [*] [1] [0] [#]
5
Open the default lock of the
specific Outdoor station
[3] [1] [#] to [3] [9] [#]
6
Open the default lock of the
specific Outdoor station when
Indoor station PIN is must
[*] Indoor station number [*]
Indoor station PIN [*] [3] [1] [#] to [3] [9] [#]
7
Open the default lock of the
last call-in Outdoor station
[3] [0] [#]
8
Open the default lock of the
last call-in Outdoor station
when Indoor station PIN is
must
[*] Indoor station number [*]
Indoor station PIN [*] [3] [0] [#]
9
Open 2nd lock of the specific
Outdoor station
[2] [1] [#] to [2] [9] [#]
10
Open the 2nd lock of the
specific Outdoor station when
Indoor station PIN is must
[*] Indoor station number [*]
Indoor station PIN [*] [2] [1] [#] to [2] [9] [#]
11
Open the 2nd lock of the last
call-in Outdoor station
[2] [0] [#]
12
Open the 2nd lock of the last
call-in Outdoor station when
Indoor station PIN is must
[*] Indoor station number [*]
Indoor station PIN [*] [2] [0] [#]
13
Call Guard unit
[4] [#]
14
Call Guard unit when Indoor
station PIN is must
[*] Indoor station number [*]
Indoor station PIN [*] [4] [#]
15
Control Switch actuator
[5] [1] [#] to [5] [199] [#]

ABB-Welcome
Operation
—12 —
16
Control Switch actuator when
Indoor station PIN is must
[*] Indoor station number [*]
Indoor station PIN [*] [5] [1] [#] to [5] [199]
[#]
17
Activate Default phone
number
[*] Indoor station number [*] [6] [0] [#]
18
Activate Default phone
number when Indoor station
PIN is must
[*] Indoor station number [*]
Indoor station PIN [*] [6] [0] [#]
19
Activate Primary phone
number
[*] Indoor station number [*] [6] [1] [#]
20
Activate Primary phone
number when Indoor station
PIN is must
[*] Indoor station number [*]
Indoor station PIN [*] [6] [1] [#]
21
Activate Secondary phone
number
[*] Indoor station number [*] [6] [2] [#]
22
Activate Secondary phone
number when Indoor station
PIN is must
[*] Indoor station number [*]
Indoor station PIN [*] [6] [2] [#]
23
Set new Indoor station PIN
[*] Indoor station number [*]
Indoor station PIN [*] [7] [*]
New Indoor station PIN [*]
New Indoor station PIN [#]
24
Activate Call Divert to
Default phone number
[*] [*] Master PIN [*] [6] [0] [#]
25
Deactivate Call Divert to
Default phone number
[*] [*] Master PIN [*] [6] [9] [#]

ABB-Welcome
Tones for indication
—13 —
9 Tones for indication
No.
Function
Tones
Explanation
1
Successfull
Confirmation of a successfull
operation
2
Not successful
Notification of a not successfull
operation
3
Door Call (repeating)
Doorcall waiting (only when direct
accept feature is deactivated,
because further Indoor stations in
same appartment)
4
Call Divert activated
(repeating)
Call divert to the default number
is activated. Tone is heard after
calling the Telephone gateway.
5
Call Divert deactivated
(repeating)
Call divert to the default number
is deactivated. Tone is heard
after calling the Telephone
gateway.
6
Programming Mode
(repeating)
Telephone gateway is in
programming mode

ABB-Welcome
Appendix
—14 —
10 Appendix
10.1 Frequently-used commisioning
Use case: One apartment with one telephone + one Telephone gateway.
User uses phone to call Telephone gateway firstly, then
No.
Function
Command
Example or explanation
Step 1
Enter Admin PIN
[*] [*] [*] + Admin PIN + [#]
The default Admin PIN is 1234
Step 2
Set Default phone
number
[7] [3] [6] [*] + Default phone number + [#]
Step 3*
Add a new Indoor station
to Telephone gateway
phonebook
[2] [4] [7] [*] + Indoor station number + [#]
Indoor station number could be from 001
to 250
Step 4
Set Primary/Secondary
phone number
[2] [*] + Indoor station number [*] + Primary
phone number + [*] + Secondary phone
number + [#]
10.2 Main commands of operation
When there is a call-in from Outdoor station, and telephone is in normal standby:
No.
Function
Command
Example or explanation
1
Accept Call-in
[1] [#]
When there is no ongoing conversation between Outdoor station and telephone, user calls the Telephone
gateway.
1
Call Outdoor station
[1] [1] [#] to [1] [9] [#] or [1] [#]
[1] [1] [#] to [1] [9] [#] to call a special
Outdoor station
[1] [#] will call Outdoor station 1
2
Call Guard unit
[4] [#]
Commands below can be done via telephone when there is ongoing conversation between Outdoor station and
telephone:
No.
Function
Command
Example or explanation
1
Open default lock
[3] [#]
2
Open the 2nd lock
[2] [#]
4
Control Switch actutor
[5] [1] [#] to [5] [199] [#]
=

ABB-Welcome
Pos: 46 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Rückseiten (--> Für alle Dokume nte< --)/Rückseite- B usch-Jaeger - Allgemein @ 20\mod_1 327320074886_15.d ocx@ 1 37103 @ @ 1
Notice
=== Ende der List ef ürTextmar keB ackcover ===
We reserve the right to at all times make technical changes as well as changes in the contents of this document without prior
notice. The detailed specifications agreed to at the time of ordering apply to all orders. ABB accepts no responsibility for
possible errors or incompleteness in this document.
We reserve all rights to this document and the topics and illustrations contained therein. The document and its contents, or
extracts thereof, must not be reproduced, transmitted or reused by third parties without prior written consent by ABB.
=== Ende der List ef ürTextmar keB ackcover ===