ABB ARG600 Dual SIM User manual

—
Wireless Gateway
ARG600 Single SIM Variant
User Manual

Document ID: 1MRS758456
Issued: 2021-12-10
Revision: G
Product version: 3.4.7
© Copyright 2021 ABB. All rights reserved

Copyright
This document and parts thereof must not be reproduced or copied without written
permission from ABB, and the contents thereof must not be imparted to a third
party, nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license
and may be used, copied, or disclosed only in accordance with the terms of such
license.
Trademarks
ABB is a registered trademark of the ABB Group. All other brand or product
names mentioned in this document may be trademarks or registered trademarks of
their respective holders.
Warranty
Please inquire about the terms of warranty from your nearest ABB representative.
abb.com/mediumvoltage

Disclaimer
The data, examples and diagrams in this manual are included solely for the concept
or product description and are not to be deemed as a statement of guaranteed
properties. All persons responsible for applying the equipment addressed in this
manual must satisfy themselves that each intended application is suitable and
acceptable, including that any applicable safety or other operational requirements
are complied with. In particular, any risks in applications where a system failure
and/or product failure would create a risk for harm to property or persons
(including but not limited to personal injuries or death) shall be the sole
responsibility of the person or entity applying the equipment, and those so
responsible are hereby requested to ensure that all measures are taken to exclude or
mitigate such risks.
This product has been designed to be connected and communicate data and
information via a network interface which should be connected to a secure
network. It is the sole responsibility of the person or entity responsible for network
administration to ensure a secure connection to the network and to take the
necessary measures (such as, but not limited to, installation of firewalls, application
of authentication measures, encryption of data, installation of anti virus programs,
etc.) to protect the product and the network, its system and interface included,
against any kind of security breaches, unauthorized access, interference, intrusion,
leakage and/or theft of data or information. ABB is not liable for any such damages
and/or losses.
This document has been carefully checked by ABB but deviations cannot be
completely ruled out. In case any errors are detected, the reader is kindly requested
to notify the manufacturer. Other than under explicit contractual commitments, in
no event shall ABB be responsible or liable for any loss or damage resulting from
the use of this manual or the application of the equipment. In case of discrepancies
between the English and any other language version, the wording of the English
version shall prevail.

Safety information
Dangerous voltages can occur on the connectors, even though the
auxiliary voltage has been disconnected.
Non-observance can result in death, personal injury or substantial
property damage.
Only a competent electrician is allowed to carry out the electrical
installation.
National and local electrical safety regulations must always be
followed.
This product is not fault-tolerant and is not designed, manufactured
or intended for use or resale as on-line control equipment or as part
of such equipment in any hazardous environment requiring fail-safe
performance, such as in the operation of nuclear facilities, aircraft
navigation or communication systems, air traffic control, direct life
support machines, or weapons systems, in which the failure of the
hardware or software described in this manual could lead directly to
death, personal injury, or severe physical or environmental damage.
To prevent damage both the product and any terminal devices must
always be switched off before connecting or disconnecting any
cables. It should be ascertained that different devices used have the
same ground potential. The output voltage of the power supply
should be checked before connecting any power cables.
The devices mentioned in this manual are to be used only according
to the instructions described in this manual. Faultless and safe
operation of the devices can be guaranteed only if the transport,
storage, operation and handling of the devices is appropriate. This
also applies to the maintenance of the products.

Table of contents
Section 1 Introduction.......................................................................3
This manual........................................................................................ 3
Intended audience.............................................................................. 3
Product documentation.......................................................................3
Product documentation set............................................................3
Document revision history............................................................. 3
Related documentation..................................................................4
Symbols and conventions...................................................................4
Symbols.........................................................................................4
Document conventions.................................................................. 5
Section 2 ARG600 overview............................................................ 7
Overview.............................................................................................7
Physical interfaces..............................................................................8
Front panel.................................................................................... 8
Back panel...................................................................................10
Side panel....................................................................................11
DIN rail mounting..............................................................................12
Product information label .................................................................12
Firmware version.............................................................................. 12
Section 3 Physical connections......................................................13
Communication connections............................................................ 13
Serial ports.................................................................................. 13
Console/serial port 1.............................................................. 13
Serial port 2............................................................................ 14
Ethernet.......................................................................................16
Wireless network......................................................................... 16
Section 4 Getting started................................................................19
Connecting cables............................................................................ 19
Connection principle.................................................................... 19
Logging in......................................................................................... 19
User interface.............................................................................. 20
Setting Ethernet port function to LAN............................................... 20
Configuring mobile WAN.................................................................. 21
Configuring the default route............................................................ 21
Section 5 Network configuration.....................................................23
Defining host and domain names..................................................... 23
Table of contents
ARG600 Single SIM Variant 1
User Manual

Configuring communication interfaces............................................. 23
Configuring Ethernet LAN............................................................23
Configuring Ethernet WAN.......................................................... 23
Configuring the mobile WAN interface........................................ 23
Setting WAN failover and backup routing....................................24
Routing parameters.......................................................................... 25
Configuring the network monitor.......................................................25
Configuring DNS proxy.....................................................................26
Checking network status.................................................................. 26
Section 6 Serial port configuration................................................. 27
Configuring serial ports.....................................................................27
Serial gateway.................................................................................. 27
Section 7 Additional system configuration......................................29
Changing passwords........................................................................ 29
Setting date and time........................................................................29
Restoring factory default settings..................................................... 30
Updating the firmware...................................................................... 30
Saving configuration profiles............................................................ 30
Section 8 Service configuration......................................................31
Configuring services......................................................................... 31
Service parameters.......................................................................... 31
Section 9 IEC-104 application settings...........................................35
The use of the IEC-104 protocol.......................................................35
Configuring IEC-104 application settings......................................... 35
IEC-104 application settings.............................................................35
Section 10 Modbus application settings...........................................41
Modbus Gateway properties.............................................................41
Modbus mode...................................................................................42
Configuring the network master to serial slaves mode.....................43
Parameter settings........................................................................... 43
Section 11 Troubleshooting..............................................................47
Common troubleshooting issues...................................................... 47
Viewing the system log.....................................................................47
Section 12 Technical data................................................................49
Section 13 Glossary......................................................................... 53
Table of contents
2ARG600 Single SIM Variant
User Manual

Section 1 Introduction
1.1 This manual
The user manual provides introductory information as well as detailed instructions
on how to set up and manage the device as part of a network environment.
1.2 Intended audience
This manual addresses the personnel involved in installing and managing the
devices.
The personnel is expected to be familiar with basic working principles of Internet
technology.
1.3 Product documentation
1.3.1 Product documentation set
Product series- and product-specific manuals can be downloaded from the ABB
Web site abb.com/mediumvoltage.
1.3.2 Document revision history
Document revision/date Product version History
A/2015-12-18 A First release
B/2017-09-22 3.4 Content updated to correspond to the
product version
C/2019-04-24 3.4.7 Content updated to correspond to the
product version
D/2020-07-09 3.4.7 Content updated
E/2021-05-31 3.4.7 Content updated
F/2021-06-04 3.4.7 Content updated
G/2021-12-10 3.4.7 Content updated
1MRS758456 G Section 1
Introduction
ARG600 Single SIM Variant 3
User Manual

Download the latest documents from the ABB Web site
abb.com/mediumvoltage.
1.3.3 Related documentation
Name of the document Description Document ID
Arctic Cyber Security Deployment
Guideline
1MRS758860
3G/LTE configuration guide Technical
Note
Configuring Wireless Gateways,
Controllers and M2M Gateway
1MRS758449
OpenVPN server in Wireless
Gateway/Controller Technical Note
Configuring and using a static key
OpenVPN server/client in Wireless
Gateway and Controller products
1MRS758450
3G/LTE Wireless Gateway firmware
update Technical Note
Updating firmware of Wireless
Gateway devices
1MRS758451
Product series- and product-specific manuals can be downloaded from the ABB
Web site abb.com/mediumvoltage.
1.4 Symbols and conventions
1.4.1 Symbols
The electrical warning icon indicates the presence of a hazard
which could result in electrical shock.
The warning icon indicates the presence of a hazard which could
result in personal injury.
The caution icon indicates important information or warning related
to the concept discussed in the text. It might indicate the presence
of a hazard which could result in corruption of software or damage
to equipment or property.
The information icon alerts the reader of important facts and
conditions.
Section 1 1MRS758456 G
Introduction
4ARG600 Single SIM Variant
User Manual

The tip icon indicates advice on, for example, how to design your
project or how to use a certain function.
Although warning hazards are related to personal injury, it is necessary to
understand that under certain operational conditions, operation of damaged
equipment may result in degraded process performance leading to personal injury
or death. Therefore, comply fully with all warning and caution notices.
1.4.2 Document conventions
A particular convention may not be used in this manual.
• Abbreviations and acronyms are spelled out in the glossary. The glossary also
contains definitions of important terms.
• Menu paths are presented in bold.
Select Main menu/Settings.
• Parameter names are shown in italics.
The function can be enabled and disabled with the Operation setting.
• Parameter values are indicated with quotation marks.
The corresponding parameter values are "On" and "Off".
1MRS758456 G Section 1
Introduction
ARG600 Single SIM Variant 5
User Manual

6

Section 2 ARG600 overview
2.1 Overview
Wireless Gateway ARG600 provides wireless monitoring and control of field
devices via cellular network from a central site or a control center. The devices
offer industrial quality connectivity for the TCP/IP and serial port based protocols.
Wireless Gateway ARG600 exhibits integrated communication capability and
seamless integration to the SCADA systems.
Wireless Gateway ARG600 is a member of ABB’s Arctic product family and part
of its 600 Wireless Gateway product series.
By using Wireless Gateway ARG600, Ethernet and serial devices can be attached
to a TCP/IP based control system. With Wireless Gateway ARG600, conventional
IEC60870-101 devices can be attached to a modern TCP/IP based IEC
60870-5-104 control system. This is made possible by the protocol conversion
from IEC 60870-5-101 to IEC 60870-104. ARG600 also supports Modbus RTU to
Modbus TCP protocol conversion.DNP3 serial devices can be attached to a DNP3
TCP SCADA system. In this case, the DNP3 protocol is transferred over TCP/IP
communication (transparent serial gateway mode).
Wireless Gateway ARG600 can be utilized for various industrial and utility
applications to maximize the benefits.
• Industrial grade TCP/IP router: several serial and TCP/IP based field devices
can be integrated into a central supervisory and control system (SCADA)
• Integrated protocol conversion enables connecting the legacy serial-based
devices into a TCP/IP-based supervisory control system (SCADA)
• Ideal for retrofitting by allowing the user to extend the life cycle of existing
serial-based substation devices
• Remote access to field devices means less site visits for operations and
maintenance
• Optimizing the cost of communication by using public cellular networks
• Possibility to upgrade from the existing legacy's private radio system to a
higher bandwidth cellular network based solution. This enables to fully
maximize the usage of the existing application. For example, the video
surveillance of traffic can now be integrated into the same system.
1MRS758456 G Section 2
ARG600 overview
ARG600 Single SIM Variant 7
User Manual

2.2 Physical interfaces
2.2.1 Front panel
5
1 2 3 4
6 7
GUID-FD7297D1-5F9C-49CF-82F0-AF5D989D035D V2 EN-US
Figure 1: Front panel
1Power supply 12…48 VDC, limited (<240 VA) power source that fulfills the requirements of
standard IEC 60950-1
2 Console/serial port
3 Application serial ports
4 LAN/WAN port
5 Power switch
6 Console/serial port switch
7 DIP switches
Power supply connector
The device has a VDC power supply connector.
Section 2 1MRS758456 G
ARG600 overview
8ARG600 Single SIM Variant
User Manual

GUID-54FB05F6-B156-4CF5-8E22-F9A5BC2E7E0C V1 EN-US
Figure 2: Power supply connector
Pin 1 Positive (+)
Pin 2 Negative (-)
The unit is protected against reversed polarity in specified voltage range.
Power switch
The power switch enables or disables the operation of the device.
Console enable switch
The console enable switch enables or disables console access. When it is disabled,
both serial ports may be used as an application serial port. When the switch is in
the right position, RS1 is in serial port mode and when in the left position, RS1 is
in console mode.
DIP switches
The DIP switches select an application port (RS2) mode and settings (RS-232 or
RS-485). By default, all DIP switches are set to the 0 position (RS-232 mode). DIP
switches 2...4 apply only when DIP switch 1 is set to differential mode (RS-485/
RS-422).
1MRS758456 G Section 2
ARG600 overview
ARG600 Single SIM Variant 9
User Manual

Table 1: DIP switches
DIP switch Mode State Description
1 RS-232 or differential 0 = RS-232, 1 =
RS-485 and RS-422
Selects the serial port
operation mode
2 DUPLEX 0 = FULL, 1 = HALF Selects between
RS-422 full-duplex (4-
wire) and RS-485 half-
duplex (2-wire)
differential modes
3BIASING 0 = OFF, 1 = ON Enables RS-422
biasing on pins 2 and
8
4TERMINATION 0 = OFF, 1 = ON Enables RS-422
termination on pins 2
and 8
If biasing and/or termination is required for the RS-485 half-duplex
(2-wire) mode, enable RS-422 biasing/termination with DIP
switches and manually connect pins 2-7 and 3-8 together at the
application port (RS-2).
Ethernet connector
The device has an RJ-45 connector for 10/100 Mbps Ethernet connection. The
maximum length of the Ethernet cable is 100 m.
2.2.2 Back panel
The device has an antenna connector and a slot for a SIM card on the back panel.
1
2
GUID-BB2AF55E-76F0-4C5D-87C2-EACC9F0088BA V1 EN-US
Figure 3: Back panel
1Antenna connector SMA (female)
2 SIM card slot
Section 2 1MRS758456 G
ARG600 overview
10 ARG600 Single SIM Variant
User Manual

2.2.3 Side panel
The ten LEDs on the side panel of the device indicate the status of the device. Only
five of them are connected. The LEDs are numbered 1...10 starting from the rear
panel side.
1
6
2345
7 8 9 10
GUID-BE410203-7AA3-4ED7-947A-7FD2CACF86FA V2 EN-US
Figure 4: LEDs
1 Batt.
2 Status
3 Power/Error
4 Function
5 Eth 1
6 Eth 2
7 Led 1
8 Led 2
9 Led 3
10 Cellular
Table 2: Description of available LEDs
LED Label State Description
1 Batt - LED unassigned
2 Status On VPN connection is up
Flashing VPN connection is starting
Off VPN connection is disabled
3 Power/Error On Operating power is turned on
Off Operating power is turned off
4 Function On Device is starting
Flashing Device is operating normally
Off Device is not operational
Table continues on next page
1MRS758456 G Section 2
ARG600 overview
ARG600 Single SIM Variant 11
User Manual

LED Label State Description
5 Eth 1 On Ethernet link is up
Flashing Ethernet link is transferring data
Off Ethernet link down
6 Eth 2 - LED reserved for future use
7 Led 1 - LED reserved for future use
8 Led 2 - LED reserved for future use
9 Led 2 - LED reserved for future use
10 Cellular On This LED is controlled by the internal
communication module logic. For
more information, see Tools/Modem
info on the Web HMI.
Flashing This LED is controlled by the internal
communication module logic. For
more information, see Tools/Modem
info on the Web HMI.
Off Cellular connection is inactive
2.3 DIN rail mounting
The device has mounting holes for optional DIN rail mounting brackets. The order
code for the DIN rail mounting kit is 2RCA028234 (DIN rail clips set consisting of
a plastic clip and screws).
2.4 Product information label
The product label contains basic information about the unit such as product name,
serial number and Ethernet MAC address.
2.5 Firmware version
The device's firmware version is visible on the welcome page (System/Welcome
Page), which is displayed after logging in to the device.
For firmware updates, contact ABB's technical customer support.
Section 2 1MRS758456 G
ARG600 overview
12 ARG600 Single SIM Variant
User Manual

Section 3 Physical connections
3.1 Communication connections
The device uses the serial ports for console or application communication, the
Ethernet port for network communication and cellular connectivity for wireless
applications.
3.1.1 Serial ports
The device has two application serial ports. Serial port 1 is configurable to either
console or data mode and supports RS-232 only. Serial port 2 is configurable to
multiple serial modes (RS-232/422/485). Serial port connectors are 9-pin D-sub
male connectors. Serial ports function as DTE devices.
3.1.1.1 Console/serial port 1
The console switch enables or disables console access. When the switch is in the
right position, serial port 1 is in the serial port mode, and when it is in the left
position, serial port 1 is in the console mode.
The console switch is located below the serial port 1 connector. Turn off power
from the device before toggling the console switch, as the switch position is read
during the boot sequence only. The baud rate is fixed to 115200 bps when the port
is configured in the serial console mode.
GUID-9F6668AA-EBAB-46B5-A1AF-35D8AE3E6C12 V1 EN-US
Figure 5: Console/RS1 port connector
Table 3: Console/RS1 port pinout
PIN Function
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
Table continues on next page
1MRS758456 G Section 3
Physical connections
ARG600 Single SIM Variant 13
User Manual

PIN Function
7 RTS
8 CTS
9 RI
Table 4: Console/RS1 port configuration
Parameter Value
Baud rate 300...230400 (console 115200) bps
Data bits 8
Parity No parity
Stop bits 1
Flow control No flow control
3.1.1.2 Serial port 2
Serial port 2 can be configured to multiple serial formats (RS-232/422/485). The
default is RS-232.
GUID-9F6668AA-EBAB-46B5-A1AF-35D8AE3E6C12 V1 EN-US
Figure 6: Application serial port
Table 5: Application serial port pinout (RS-232)
PIN Function
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
Section 3 1MRS758456 G
Physical connections
14 ARG600 Single SIM Variant
User Manual