abc NXT 3 User manual

NXT 3
Quick Start
Guide
Starting Out
When you rst get started, this is
how your cart will look. The rest
of this guide will explain getting
from here to cleaning windows.
Attach Handle
Using tools (not included)
tighten nut on to handle bolt.
READ THIS
Read this guide before using
your system. Failure to follow
these directions voids all
warranties.
View the quick start video:
www.abcwindowsupply.com/nxt3quickstart

RO Bypass
Pole
Insert the tubing into the 1/4” tting
on the cartridges marked RO. The
output end of the Bypass Hose can
be run wherever you nd best.
Connect your pole using the quick
connect/shut o valve provided
with your system. Make sure the
shut o valve is in the on position.
Connect your water source to
the garden hose tting on your
Carbon/Sediment lter.
Source Hose

Turn On Water
Shut Down Procedure
Close your bypass valve until
only a trickle is coming out.
At least some water must be
coming out at all times while
in use.
When you are done using your
system, fully open the bypass valve
and close the shut o valve. This
will ush your RO membranes
prolonging their life.
Do This for 1-2 minutes.
Clean Windows
Enjoy your NXT system!
Turn o Water.