abi CAPRI 11658 User manual

CAP R I MIN I WALL MO UN T E D BASIN
Dis cla imer: P ro d u c ts in th is ma n u a l mu s t by la w b e in s talled b y licen s ed an d reg is tered tra d es p eo p le in a cco rd a n ce w ith th e releva n t stan d a rds . A B I a n d th e ma n u fa ctu rer/d is trib u to r
res erve t h e rig h t to va ry s p ecif ic a tio n s o r d elete mo d els fro m t h eir ra n g e w ith o u t prio r n o tif ic a t io n . Dimen s io n s a re n o min a l mea s u remen ts o n ly. Th e in f o rmatio n lis ted is co rrect at th e time
o f p u b lica tio n , h o w ever A B I a n d th e man u f a c tu rer/d is trib u to r ta kes n o res p o n s ib ility fo r p rin tin g erro rs. C o p yrig h t © A B I I n terio rs 2 02 2 Pty Ltd
SPECIFICATIONS
RECOMMENDED USE Domestic
MATERIAL Solid Surface
INSTALLATION Wall Mount, recommended to be used with a bench mounted mixer
or a spout with reach of 110mm or less.
OVERFLOW No
CAPACITY 5.8L
RIM THICKNESS 3mm

DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
surfaces as this may
scratch the material.
INSTALLATION GUIDE
This product must be installed by a licensed plumber.
This is a general installation guide - there are many factors
that are involved that can alter the installation method.
This product install must comply with AS/NZS 3500.
Note: This product must be installed by a licensed trade
This is a general installation guide - there are many factors that are
involved that can alter the installation method.
INSTALLATION GUIDE
1 2
Check the desired height of basin from floor.
3 4
Fit brackets to underside of basin using fixings provided.
Hold basin against wall aligning outlet of trap with waste
pipe & cut waste to suit trap.
Fit pop up waste and trap to basin.
5 6
Secure plumbing to basin and wall. Test by running
water through the waste and pushing plug down.
Silicone top and sides of basin if necessary.
the basin & mark out desired position.
Drill bracket holes and & insert wall plugs. Fix basin to
wall through brackets with fixings provided.
If correct height and position is suitable, level the top of