
Regularly clean with mild
liquid detergent or soap
and water
DO NOT use cream
cleaners or bleach.
These substances are
abrasive
DO NOT use cleaning
pads with abrasive
surfaces as this may
scratch the material
1Using the fixing bracket as a guide, drill holes
in desired position and insert wall plugs.
INSTALLATION GUIDE
Note: This product must be installed by a licensed plumber. This is a general installation guide - there are many factors
involved that can alter the installation method. AU/NZ: For installations within Australia and New Zealand, this product
must be installed in compliance with AS/NZS 3500. UK: For installations in the United Kingdom this product must be
installed in compliance with the Water Supply (Water Fittings) Regulations and Water Supply (Water Fittings) (Scotland)
Byelaws. Other: For installations outside these countries, this product must be installed in compliance with the standards in
your respective country.
2Remove bracket from the towel rail using the Allen key
to loosen the grub screw. Install bracket by fastening
the supplied screws into the wall plugs.
3Place the towel rail onto the bracket and firmly
tighten grub screws using Allen key.
Important - If installing onto plasterboard please use appropriate
fixings.
INTERIORS
What's in the box
1 x Towel rail
2 x Fixing bracket
4 x Wall plug
4 x Screws
1 x Allen key
2 x Grub screw