Acnodes PC 5151 User manual

U S E R ’ S
M A NU A L
P C - 5151
Socket478(P4/P4-M)
15”1024X768PanelPCSystem
Copyright Notice
!

PC 5151 Panel PC System
With LCD / Touch screen (optional)
OPERATION MANUAL
COPYRIGHT NOTICE
This operation manual is meant to assist users in installing and setting up the
system. The information contained in this document is subject to change
without prior any notice.
This manual is copyrighted August, 2004. You may not reproduce or
transmit in any form or by any means, electronic, or mechanical, including
photocopying and recording.
ACKNOWLEDGEMENTS
All trademarks and registered trademarks mentioned herein are the property
of their respective owners.
CE NOTICE
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
!

Copyright Notice
FCC NOTICE
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void your
authority to operate such equipment.
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
WARNING! Some internal parts of the system may have high electrical voltage. And
therefore
we strongly recommend that qualified engineers can open and disassemble the
system.
The LCD and touch screen are fragile, please handle them with extra care.
!
!
* All information contained in this document is subject to change without prior notice.
!

Contents
TABLE OF CONTENTS
CHAPTER 1 INTRODUCTION
1-1 About This Manual ....................................................... 1-2
1-2 Case Illustration ............................................................. 1-3
1-3 System Specification ..................................................... 1-4
1-4 Safety Precautions ......................................................... 1-9
CHAPTER 2 SYSTEM CONFIGURATION
2-1 Jumper & Connector Quick Reference Table ............... 2-2
2-2 Component Locations ................................................... 2-3
2-3 How to Set the Jumpers ................................................ 2-4
2-4 COM Port Connector ………………………………… 2-6
2-5 COM Port RI & Voltage Selection ……………….….. 2-8
2-6 RS232/422/485 (COM2) Selection …………..….…… 2-12
2-7 VGA Connector ……………………………………….. 2-13
2-8 LVDS Connector ……………………………………… 2-14
2-9 Brightness Voltage Selection …………………………. 2-15
2-10 LCD Panel Voltage Selection ………………………… 2-16
2-11 Power Connector ………………………………………. 2-17
2-12 Floppy Disk Drive Connector ………………………… 2-18
2-13 Hard Disk Drive Connector ………..…………………. 2-19
2-14 Printer Connector ……………………………………… 2-21
2-15 LAN Connector ………………….……………………. 2-22
2-16 LAN LED Connector …...…………………………….. 2-22
2-17 Keyboard Connector ………………………………….. 2-23
2-18 PS/2 Mouse Connector ………………………………… 2-23
2-19 Sound Connector ………………………………………. 2-24
2-20 Reset Connector ……………………………………….. 2-25
2-21 HDD LED Connector ………………………………….. 2-25
2-22 Power Button ………………….…................................. 2-26
2-23 External SMI Connector ………………………………. 2-26
2-24 External Speaker Connector …………………………… 2-26
2-25 Keylock Connector ……………………………………. 2-27
2-26 Clear CMOS Selection ………………………………… 2-27
2-27 USB Connector ……………………………………….. 2-28
2-28 Inverter Connector …………………………………….. 2-29
2-29 Reset/NMI/Clear Watchdog Selection ………………… 2-30
2-30 CPU FAN Connector ………………………………….. 2-31
!

Contents
2-31 System FAN Connector ……………………………….. 2-31
2-32 North Chip FAN Connector …………………………… 2-31
2-33 Power LED Connector ………………………………… 2-32
2-34 Memory Installation ............……….............................. 2-32
2-35 P4/ P4-M CPU Selection ……………………………… 2-33
2-36 Digital Input/Output Connector ……………………….. 2-34
2-37 ATX +12V Power Connector …………………………. 2-34
2-38 LVDS Panel Resolution Selection …………………….. 2-35
CHAPTER 3 SOFTWARE UTILITIES
3-1 Introduction ................................................................... 3-2
3-2 VGA Driver Utility ....................................................... 3-3
3-3 Flash BIOS Update ....................................................... 3-4
3-4 LAN Driver Utility ........................................................ 3-6
3-5 Sound Driver Utility .............................…...................... 3-7
3-6 Intel® Chipset Software Installation Utility ………… 3-8
3-7 USB2.0 Chipset Software Installation Utility …………. 3-9
3-8 Touch Screen Driver Utility (Optional) ………..…….. 3-9
3-9 USB CF Card Driver Utility (Optional) ……………… 3-9
3-10 Watchdog Timer Configuration .................................... 3-10
CHAPTER 4 AWARD BIOS SETUP
4-1 Introduction ................................................................... 4-2
4-2 Entering Setup ............................................................... 4-3
4-3 The Standard CMOS Features ….................................. 4-4
4-4 The Advance BIOS Features ….................................... 4-8
4-5 The Advanced Chipset Features ................................... 4-11
4-6 Integrated Peripherals ……........................................... 4-14
4-7 Power Management Setup ……………………………. 4-18
4-8 PNP/PCI Configuration ................................................ 4-20
4-9 PC Health Status …………………………………….. 4-22
4-10 Frequency / Voltage Control ………………………… 4-24
4-11 Load Fail-Safe Defaults ................................................ 4-25
4-12 Load Optimized Defaults .............................................. 4-25
4-13 Password Setting .................................................…...... 4-26
4-14 Save & Exit Setup ......................................................... 4-27
4-15 Exit Without Saving ...................................................... 4-28
! APPENDIX A SYSTEM ASSEMBLY
!

Contents
Exploded Diagram for Removing Arm Holder ……………… A-2
Exploded Diagram for Removing Hook Holder ……………… A-3
Exploded Diagram for Removing EXT-Case ………………… A-4
Exploded Diagram for Removing Back Cover ……………….. A-5
Exploded Diagram for Removing LCD Assembly …………. A-6
Exploded Diagram for Front Panel …………………………… A-8
Exploded Diagram for Removing CD-ROM Assembly ……… A-10
Exploded Diagram for Removing HDD Assembly …………… A-11
Exploded Diagram for Removing Motherboard & Power …… A-12
Exploded Diagram for Removing Output Panel ……………… A-13
Exploded Diagram for Removing FDD & CD-ROM ………… A-14
Exploded Diagram for Removing Mask ………………………. A-16
Exploded Diagram for Wall Mounting ……………………….. A-17
APPENDIX B TECHNICAL SUMMARY
Block Diagram ......................................................................... B-2
Interrupt Map ............................................................................ B-3
RTC & CMOS RAM Map ....................................................... B-4
Timer & DMA Channels Map .................................................. B-5
I/O & Memory Map ................................................................. B-6
!

!
!
!
!
INTRODUCTION !
CHAPTER
1
!
!
!
!
This chapter gives you the inform lso
outlines the System specifications.
Section includes:
z About This Manual
z Case Illustration
z System Specifications
z Safety precautions
for a Quick Start.
ge 2-1
! Page:1-1

Chapter 1 Introduction
1-1. ABOUT THIS MANUAL
!
Thank you for purchasing our Panel PC. It is an updated system designed to be
comparable with the highest performance of IBM AT personal computers. It
provides faster processing speed, greater expandability, and can handle more
tasks. This manual is designed to assist you on how to make the proper
installation to set up the system. It contains five chapters. The user can use
this manual for configuration according to the following chapters :
Chapter 1 Introduction
This chapter introduces you to the background of this manual, illustration of
the case, and the specifications for this system. The final page of this chapter
indicates some safety reminders on how to take care of your system.
Chapter 2 System Configuration
This chapter outlines the components' locations and their functions. In the
end of this chapter, you will learn how to set jumper and how to
configure the system for your own needs.
Chapter 3 Software Utilities
This chapter contains helpful information for proper installations of the VGA
utility, LAN utility, Sound utility and Flash BIOS update. It also describes
the function of the Watchdog Timer.
Chapter 4 Award BIOS Setup
This chapter indicates on how to set up the BIOS configurations.
Appendix A System Assembly
This section gives you the exploded diagram for the whole system unit.
Appendix B Technical Summary
This section gives you the information about the Technical maps.
!
Page: 1-2 PC 5151 USER MANUAL

Chapter 1 Introduction
1-2. CASE ILLUSTRATION
!
!
PC 5151 USER MANUAL Page: 1-3

Chapter 1 Introduction
1-3. SYSTEM SPECIFICATIONS
MAINBOARD
z CPU TYPE:
Intel® Pentium® 4/Pentium® 4-M/Intel® Celeron/ Mobile processors
CPU Frequency 2.0~2.8GHz
Auto detect voltage regulator.
z CHIPSET:
Intel® 845GV
z MEMORY :
Up to 1GB DDR SDRAM
One 184-pin DIMM sockets on board.
z CACHE :
Built-in CPU(128/256KB Cache).
z REAL-TIME CLOCK :
CR2023 battery backed CMOS RAM
Hardware implementation to indicate century rollover.
z BIOS :
Phoenix-Award Flash BIOS for plug & play function.
Memory size with 4MB and with VGA BIOS.
Support S I/O Setup.
z KEYBOARD CONNECTOR :
Mini DIN connector.
Supports PC/AT Keyboard.
z MOUSE CONNECTOR :
Mini DIN connector.
Supports PS/2 Mouse.
!
Page: 1-4 PC 5151 USER MANUAL