64-bit/66MHz PCI - Ultra320 SCSI
Hardware RAID Controller
●Supports RAID 0/1, or RAID 0/1/4/5/10 depending on
the type of controller
●Hot Plug, Auto Hot Plug with SAF-TE support
●Private or Pool Hot Fix drives
●Hardware RAID is totally independent of the host and
operating system
●Integrated acoustic alarm
Versatile Connectivity Capabilities
●Support of each one internal and one external
Ultra320 SCSI channel or two Ultra320 SCSI channels
with two internal and two external connections
depending on the type of controller
●Connection of up to 15 devices per channel with soft-
ware-switchable multi-mode termination (LVD/SE)
●Maximum synchronous data transfer rate of up to
320MB/sec. per channel (LVDS) depending on the
attached drives
●Backwards compatible to former SCSI devices
●Supports Ultra320 SCSI features and other SCSI devices
●Cable length up to 12 meters (LVDS) per channel
Multiprocessor RISC Architecture
●64-bit Intel* 80303 I/O processor, > 100 MIPS
●”Hardware XOR Engine”, integrated coprocessor
for optimized RAID 4/5 operations
●Completely offloading the host CPU
PCI Bus Specifications
●64-bit/66MHz PCI bus interface with up to 528MB/sec.
data throughput
●Backwards compatible with 32-bit/33MHz, 64-bit/33MHz
and 32-bit/66MHz PCI slots, as well as PCI-X slots
●Supports 5 Volt and 3.3 Volt PCI slots
●Supports PCI Hot Plug functions under Windows*
2000 and Novell* NetWare* (OS driver needed for “hot
replacement” and PCI Hot Plug System)
Optimum in Memory Technology
●64-bit cache RAM, non-buffered PC133 ECC SDRAM,
either 128MB onboard with GDT8x14RZ or optional
64 up to 256MB DIMM stick depending on the type of
controller
●Intelligent multi-level cache algorithm with
adaptive delayed write & read ahead functions
Intelligent Battery Backup Unit
BBU Support for even more Data Reliability
72 Hours of Cache Memory Protection
●GDT8524RZ+BBU, ICP Controller plus ICP Battery
Backup Unit, includes BBU support in hardware and
firmware
●With GDT8524RZ+ BBU functionality can optionally be
updated by putting the battery (ICP BBU) into action
●RAID cache holds all data and stores it even in the
case of power failure, at system/controller restart all
data in cache will be written back to hard drives
●Lithium Ion Battery with typ./min. hold time of
72 hours (appropriate handling required), depending
on the used memory module
●Intelligent battery management via ICP RAID software
for monitoring current, voltage, temperature and
actual capacity of battery, for instance