Thank you for purchasing an ADE digital scale. Please read this instruction manual carefully
before first use. Keep these instructions for future use.
Scale Initial Setup and Battery Replacement
•This scale operates on two CR 03 batteries (included).
•To activate the batteries for initial use: open the battery cover on the
bottom of the scale and remove the safety strip. Ensure the correct
polarity of the batteries (+/-).
•To replace the batteries: open the battery cover and slide the batteries
down until they can be easily removed. Be careful not to bend the
contact. Insert the new batteries ( x CR 03 ) and close the battery
cover.
Scale Powering On/Off
•Place the scale on a flat surface.
•Turn on the scale by pressing the ON/OFF button.
•Scale will be ready for use when 0g or 0.0 oz is displayed on the screen.
•This scale is equipped with an auto-off feature to conserve battery power. The
unit will turn off automatically after being idle for minutes.
•Turn the scale off manually by lightly touching and holding the ON/OFF button.
Weight and Volume Measurement
•Press the ON/TARE button to change the desired unit of measure
(g = gram to oz = ounce)
Tare unction
•Place a bowl on the scale and press the TARE button to set the scale to 0
•Weigh your first ingredient
•Press TARE button again to reset to 0, then add and weigh your next ingredient
•Repeat for additional ingredients
•This process can be repeated until the max. capacity of the scale has been
reached
•The display will show the total accumulated weight with a negative number after
the bowl is removed from the scale
Care Instructions
•Clean the outside of the scale with a slightly damp cloth, do not
immerse.
•Avoid contact with citric acid, solvents and abrasive cleaning agents.