Adey MagnaClean Professional2XP User manual

Installation and servicing

For the most up to date version of the MagnaClean Professional2XP Installation and Servicing
instructions visit adey.com/us. Warranty Terms & Conditions can be found at adey.com/us/support/
register-warranty
Maximum working pressure: 87 PSI
Maximum working temperature: 95°C / 203°F
Flow rate: <21 gal/min
Inlet: Bi-directional
MagnaClean filter contains a strong magnet. Keep away from all electrical devices, bank cards
and other magnetic devices.
MagnaClean filter contains a strong magnet. Caution should be taken at all times when handling
if you have a pacemaker fitted.
MagnaClean filter is a pressurized device. Always release pressure before servicing.
Unit may be hot in operation. Handle with care.
IMPORTANT - Always follow the electrical and safety standards when installing a
MagnaClean filter ensuring pipework is appropriately earth bonded either side of the filter.
WARNING - Cancer and reproductive Harm
www.P65Warnings.ca.gov
CAUTION:
Important
MagnaClean Professional2XP has been developed with a greater filter capture capacity providing
protection for larger residential hydronic heating systems.
MagnaClean Professional2XP®
Combi/sealed system
Open vented system
MagnaClean Professional2XP can be installed anywhere before the boiler. To achieve the best
level of protection, it is recommended that the filter is fitted after the last radiator and before the
boiler. This also ensures a system flush can be carried out using a MagnaCleanse®on the return
(position A only).
Installation overview
Note: In both diagrams, position A is best practice, Position B is suitable if space is tight on the return.
New filter installation
2
1
4
24
3
4
1
- Always ensure the filling loop is fitted after the filter.
Cut and remove
section using
measurement
guide sticker
supplied.
Guide sticker
supplied with
valve assembly.
Valve A
Valve B
1
2
The following instructions are designed to support contractors in the safe and effective installation
and servicing of MagnaClean Professional2XP and should be followed at all times. It is recommended
that the filter is installed by a qualified heating contractor. The lid seal should be checked for wear
when servicing MagnaClean®. It is Best Practice to replace the lid seal at each service. To arrange
replacements please email the ADEY Team at inf[email protected].
Always re-dose the system with a suitable protector such as ADEY MC1+®Hydronic Heating
System Protector
CAUTION:
Do NOT overtighten.
1
22

PROTECTOR
4
6
7 4
84
9
4
4
Hand tighten.
1 - Turn valves on.
2 - Vent.
3 - Wipe filter dry.
Servicing
4
11 - Turn valves off.
2 - Vent.
4
2Remove drain plug. Vent.
4
4
Replace drain plug.
Important - Do NOT
overtighten.
Remove sleeve.
4
6
3
4
4
7
3
4
8
1
2
2
3
1
2
4
3
Remove lid
assembly.
Clean
1
Clean
2
Clean 3
PROTECTOR
4
9
Attach valve
disassembly clips
in 2 places.
Dose with MC1+
Protector.
Tighten by a ¼ turn max.
Important - Do NOT
overtighten.
1
Dose with MC1+
Protector.

4
54
6
4
4
4
7
Multiple installation options
4
2
4
14 3
MagnaClean Professional2XP has been designed as a Bi-directional flow filter. The inline design and
360° rotational valves provide multiple installation options for both vertical and horizontal pipework.
This ensures greater flexibility within the tightest working environments.
4
10
O ring
The lid seal should be cleaned
and checked for wear when
servicing MagnaClean. It is
Best Practice to replace the
lid seal at each service.
1
Only use Silicon grease or
water to lubricate O ring.
Do not use flux or EP grease.
1
11
Hand tighten.
4
12 Tighten by a ¼ turn max.
Important - Do NOT
overtighten.
4
13
1 - Turn valves on.
2 - Vent.
3 - Wipe filter dry.
2
3
1

M11967 LF2-01-04781-US V1
Telephone: [phone] Email: [e-mail]
www.adey.com/us
Produced from recycled material
A carbon neutral company
For the most up-to-date version of installation and serving instructions visit www.adey.com/us
All ADEY marks are trademarks of Adey Holdings (2008) Limited. Please visit adey.com/trademarks for a list of ADEY marks
Copyright Adey Holdings (2008) Limited © 2019. All rights reserved.
™