ADTRAN 825-v6 Owner's manual

Safety and Regulatory Notice
Sécuritéet Avis de réglementation
Sicherheitsvorschriften und -hinweise
f CAUTION!
■Connect the DC power inputs to approved Limited Power Source (LPS) power supplies ONLY.
■This equipment contains no parts that can be serviced by the user.
■This product is intended to operate in ambient temperatures up to 40°C.
■It is recommended that an external AC Surge Protection Device be installed at the AC input connection to the local AC-Powered product. The Surge
Protection device should provide L-N, L-G, and N-G protection. It is also recommended that the device contains a visual 'GOOD' indicator.
g NOTES
This product meets the following compliance requirements:
■ This product meets EU RoHS Directive. Refer to www.adtran.com/environmental for further information on RoHS/WEEE.
■ This product is UL Listed to the applicable UL/CSA Standards.
■ This product has also been evaluated to applicable international standards including CE and RCM marking.
■ The AC branch circuit socket-outlet must be installed near the equipment and must be easily accessible.
■ The RJ-45 jacks are not used for telephone line connection.
■This product contains a Class 1 Laser module that complies with FDA 21 CFR 1040.10, 1040.11 and IEC 60825-1.
f WARNING! fAVERTISSEMENT! fWARNUNG!
■Read all warnings, cautions, notes,
and installation instructions before
installing or servicing this equipment.
■Lisez toutes les mentions de danger et de
prudence et les remarques, ainsi que la
notice d'installation, avant d'effectuer
l'installation ou l'entretien de cet
équipement.
■Lesen Sie alle Warnungen,
Gefahrenhinweise, Anmerkungen und
Installationsanweisungen bevor Sie
dieses Gerät installieren oder warten.
■Refer to the national, state, and local
electrical codes for the requirements
for power, grounding, wiring, and
installation methods.
■Consultez les Codes de l'électricité -
national, régional et local - pour connaitre
les exigences concernant l'alimentation,
la mise à terre, le câblage, et les
méthodes d'installation.
■Beziehen Sie sich auf die in den
nationalen, bundesstaatlichen und
lokalen elektrischen Vorschriften
festgelegten Anforderungen an
Stromversorgung, Erdung, Verkabelung
und Installationsmethoden.
■This product may be powered by
multiple sources. Disconnect all
sources of power prior to servicing.
■Ce produit peut être alimenté par des
sources multiples. Débranchez toutes les
sources d'énergie avant l'entretien.
■Dieses Produkt kann durch mehrere
Quellen versorgt werden. Trennen Sie
alle Stromquellen vor der Wartung.
Wi-Fi 6 XGS-PON HGU
May 2021
617600139F1-17a
P/N: 17600139F1
825-v6 Home Gateway Unit

2 617600139F1-17a
Rev A
Regulatory Compliance Information
This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio
devices. Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by
the applicable National regulatory authority.
This product's firmware limits operation to only the channels allowed in a particular Region or Country. Therefore, all options described in this user's guide
may not be available in your version of the product.
Europe – EU Declaration of Conformity
Products bearing the marking comply with the following EU directives:
■ EMC Directive 2004/108/EC
■ Low Voltage Directive 2006/95/EC
If this product has telecommunications functionality, it also complies with the requirements of the following EU Directive:
■ RED 2014/53/EU
Compliance with these directives implies conformity to harmonized European standards that are noted in the EU Declaration of Conformity.
For indoor use only. Valid in all EU member states, EFTA states, and Switzerland.
This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the
frequency range of 2454 - 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.
FCC Requirements for Operation in the United States
FCC Information to User
This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will
invalidate all applicable regulatory certifications and approvals.
FCC Guidelines for Human Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance of 20 cm between the radiator and your body.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC
multi-transmitter product procedures.
FCC Declaration of Conformity
We, ADTRAN, Inc., 901 Explorer Blvd, Huntsville, AL 35806, declare under our sole responsibility that the 825-v6 complies with Part 15 Subpart B of FCC
CFR47 Rules. Operation is subject to the following two conditions:
■ This device may not cause harmful interference, and
■ This device must accept any interference received, including interference that may cause undesired operation.
FCC Radio Frequency Interference Warnings & Instructions
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
methods:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and the receiver.
■ Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected.
■ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
■ Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this
equipment.
■ This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
■ For product available in the USA and Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
■ Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection d'autres canaux n'est pas
possible.
♦ This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with
FCC multi-transmitter product procedures.
♦ Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur.
■ This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor environment only.

617600139F1-17a 3
Rev A
FCC Requirements for Operation in the United States
FCC Information to User
This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will
invalidate all applicable regulatory certifications and approvals.
FCC Guidelines for Human Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance of 25 cm between the radiator and your body.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC
multi-transmitter product procedures.
CAN ICES-3(B)/NMB-3(B)
Canadian Department of Communications Radio Interference Regulations
This digital apparatus (WiFi 6 GPON HGU Model 865-v6) does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in
the Radio Interference Regulations of the Canadian Department of Communications.
Industry Canada
This device has been certified for use in Canada under Industry Canada (IC) Radio Standards Specification (RSS) RSS-210 and RSS-Gen. This Class B
digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE: Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
NOTE IMPORTANTE: Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être
installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
CAUTION!
f
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile
satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies
with the e.i.r.p. limit;
(iii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits
specified for point-to-point and non-point-to-point operation as appropriate; and
(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly
indicated.
(v) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-
5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Copyright © 2021 ADTRAN, Inc. All Rights Reserved.
ADTRAN CUSTOMER CARE:
From within the U.S. 1.800.726.8663
From outside the U.S. +1 256.963.8716
PRICING AND AVAILABILITY 1.800.827.0807
*617600139F1-17a*
f ATTENTION!
i) les dispositifs fonctionnant dans la bande 5150-5250MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 à 5350MHz et de 5470 à 5725MHz doit être conforme à la limite
de la p.i.r.e;
(iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 à 5850MHz) doit être conforme à la limite de la p.i.r.e. spécifiée
pour l'exploitation point à point et l’exploitation non point à point, selon le cas;
(iv) les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au masque d’élévation, et énoncée à la section
6.2.2 3), doivent être clairement indiqués.
Installation Instructions:
Refer to the Quick Start or Job Aid for this
product (P/N: 61181501G8-13) for detailed
installation instructions.
Notice d'installation :
Rapportez-vous au Guide de prise en main,
ou à L'Aide-mémoire pour ce produit (Code
article 61181501G8-13) pour des consignes
d'installation détaillées.
Installationsanweisungen:
Genaue Installationsanweisungen finden Sie
in der Schnellstart- oder Auftragshilfe für
dieses Produkt (P/N:61181501G8-13).