Advantech DS-270 User manual

User Manual
DS-270
Advanced Graphic Performance
OPS Computing Player with
Intel J1900 Processor

DS-270 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2015
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. also reserves the
right to improve the products described in this manual at any time without notice. No
part of this manual may be reproduced, copied, translated, or transmitted in any form
or by any means without the prior written permission of Advantech Co., Ltd. Informa-
tion provided in this manual is intended to be accurate and reliable. However, Advan-
tech Co., Ltd. assumes no responsibility for its use, nor for any infringements on the
rights of third parties that may result from its use.
Acknowledgements
Award is a trademark of Award Software International, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor-
poration.
Intel® and ATOM® are trademarks of Intel Corporation.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd..
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology LTD.
CHRONTEL is a trademark of Chrontel Inc.
All other product names or trademarks are properties of their respective owners.
For more information about this and other Advantech products, please visit our web-
site at http://www.advantech.com/
For technical support and services, please visit our support website at
http://support.advantech.com.tw/support/
Part No. 2006S27001 Edition 1
Printed in China May 2015

iii DS-270 User Manual
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse, abuse, accident, or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced at no charge during the warranty period. For out-of-war-
ranty repairs, customers are billed according to the cost of replacement materials,
service time, and freight. Please consult your dealer for more details.
If you suspect your product to be defective, follow the steps listed below:
1. Collect all information about the problem encountered (for example, CPU
speed, Advantech products used, other hardware and software used, etc.). Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Please have the manual, product,
and any relevant information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and proof of the purchase date (such as a photocopy of your sales
receipt) in a shippable container. Products returned without proof of purchase
date are not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package; then ship the
product prepaid to your dealer.
Declaration of Conformity
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the inter-
ference at his own expense.

DS-270 User Manual iv
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com for the latest prod-
uct information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you require additional assistance. Please have the
following information ready before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Warnings, Cautions, and Notes
Packing List
Before installation, please ensure that the following items have been shipped:
1 x DS-270 unit
1 x Simple Chinese User Manual
1 x Accessory box
1x China RoHS
Warning! Warnings indicate conditions, which if not observed, can cause personal
injury!
Caution! Cautions are included to help users avoid hardware damage and data
loses.
For example,
“New batteries are at risk of exploding if incorrectly installed. Do not
attempt to recharge, force open, or heat the battery. Replace the battery
only with the same or equivalent type recommended by the manufac-
turer. Discard used batteries according to the manufacturer's instruc-
tions.”
Note! Notes provide additional information.

v DS-270 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect this equipment from all AC outlets before cleaning. Do not use liquid
or spray detergents for cleaning. Instead, use only a damp cloth.
4. For pluggable equipment, the power outlet socket should be located nearby and
easily accessible.
5. Protect this equipment from humidity.
6. Place this equipment on a reliable surface during installation. Dropping or letting
the equipment fall can cause damage.
7. The openings on the enclosure are for air convection to protect the equipment
from overheating. Do not cover the openings.
8. Ensure that power voltage is correct before connecting the equipment to a
power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If not used for a long time, disconnect the equipment from the power source to
avoid damage by transient overvoltage.
12. Never pour liquid into the openings. This can cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should only be
opened by qualified service personnel.
14. If one of the following occurs, have the equipment checked by authorized ser-
vice personnel:
The power cord or plug is damaged.
Liquid has penetrated the equipment.
The equipment has been exposed to moisture.
The equipment is malfunctioning, or does not operate according to the user
manual.
The equipment has been dropped or damaged.
The equipment shows obvious signs of breakage.
15. Do not store this equipment in an environment where the temperature fluctuates
below -20 °C (-4 °F) or above 60 °C (140 °F) as this can cause damage. The
equipment should be stored in a controlled environment.
16. CAUTION: Batteries are at risk of exploding if incorrectly installed. Replace only
with the same or equivalent type recommended by the manufacturer. Discard
used batteries according to the manufacturer’s instructions.
The sound pressure at the operator position does not exceed 70 dB (A), as per IEC
704-1:1982.
DISCLAIMER: These instructions are provided according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of all statements contained herein.

DS-270 User Manual vi

vii DS-270 User Manual
Contents
Chapter 1 General Introduction ...........................1
1.1 Introduction ............................................................................................... 2
1.2 Product Features....................................................................................... 2
1.2.1 Key Features................................................................................. 2
1.2.2 Display .......................................................................................... 2
1.2.3 Power Consumption...................................................................... 2
1.3 Hardware Specifications ........................................................................... 3
1.4 Mechanical Specifications......................................................................... 4
1.4.1 Dimensions ................................................................................... 4
Figure 1.1 DS-270 Mechanical Dimensions (Unit: mm)............... 4
1.4.2 Weight........................................................................................... 4
1.5 Power Requirements................................................................................. 4
1.5.1 System Power:.............................................................................. 4
1.5.2 RTC Battery: ................................................................................. 4
1.6 Environmental Specifications .................................................................... 5
1.6.1 Operating Temperature................................................................. 5
1.6.2 Relative Humidity .......................................................................... 5
1.6.3 Storage Temperature.................................................................... 5
1.6.4 Vibration Loading During Operation (HDD) .................................. 5
1.6.5 Safety............................................................................................ 5
1.6.6 EMC .............................................................................................. 5
Chapter 2 Hardware Installation ..........................7
2.1 DS-270 I/O Connectors............................................................................. 8
2.1.1 Front I/O........................................................................................ 8
2.1.2 Rear I/O ........................................................................................ 8
2.2 DS-270 External I/O Connectors............................................................... 8
2.2.1 Power ON/OFF Button.................................................................. 8
Figure 2.1 Power ON/OFF Button ............................................... 8
2.2.2 USB Connectors ........................................................................... 8
Figure 2.2 USB Connector........................................................... 8
Table 2.1: USB3.0 Port Pin Assignments.................................... 9
2.2.3 Ethernet Connector (LAN) ............................................................ 9
Figure 2.3 Ethernet Connector ................................................... 9
Table 2.2: LAN Connector Pin Assignments ............................... 9
2.2.4 Audio Connector ........................................................................... 9
Figure 2.4 Line-out....................................................................... 9
2.2.5 HDMI........................................................................................... 10
Figure 2.5 HDMI Connector....................................................... 10
Table 2.3: HDMI Pin out ............................................................ 10
2.2.6 JAE TX-25 Connector ................................................................. 10
Figure 2.6 JAE TX-25 80-pin Connector.................................... 10
Table 2.4: JAE-TX-25 Pin out.................................................... 10
2.3 Hardware Installation .............................................................................. 11
2.3.1 Storage Installation ..................................................................... 11
Figure 2.7 HDD Installation........................................................ 12
2.3.2 Memory 1 Installation.................................................................. 13
Figure 2.8 Memory 1 Installation ............................................... 13
2.3.3 Memory 2 Installation.................................................................. 14
Figure 2.9 Memory 2 Installation ............................................... 14
2.3.4 Mini PCIe Card............................................................................ 15
Figure 2.10mini-PCIe Installation................................................ 15

DS-270 User Manual viii
Chapter 3 BIOS Settings .................................... 17
3.1 BIOS Introduction.................................................................................... 18
3.2 Entering Setup ........................................................................................ 18
3.2.1 Main Setup.................................................................................. 18
Figure 3.1 Main setup screen .................................................... 18
3.2.2 Advanced BIOS Features Setup................................................. 19
Figure 3.2 Advanced BIOS Features setup screen ................... 19
Figure 3.3 ACPI setup screen ................................................... 20
Figure 3.4 HW Monitor screen................................................... 21
Figure 3.5 S5 RTC Wake setup screen..................................... 21
Figure 3.6 CPU Configuration setup screen.............................. 22
Figure 3.7 IDE Configuration setup screen ............................... 23
Figure 3.8 Miscellaneous Configuration setup screen............... 24
Figure 3.9 USB Configuration setup screen .............................. 25
Figure 3.10Intel® TXE Configuration setup screen .................... 26
3.2.3 Chipset BIOS Feature Setup ...................................................... 27
3.2.4 Security BIOS Feature Setup ..................................................... 28
Figure 3.11Security Configuration setup screen ........................ 28
3.2.5 Boot BIOS Feature Setup ........................................................... 29
Figure 3.12Boot Configuration setup screen .............................. 29
3.2.6 Save & Exit BIOS Feature Setup................................................ 30
Figure 3.13Save & Exit Configuration setup screen................... 30
Chapter 4 Software............................................. 33
4.1 Intel® TXE Driver Installation.................................................................. 34

Chapter 1
1General Introduction
This chapter gives background
information regarding the DS-270
series.

DS-270 User Manual 2
1.1 Introduction
DS-270 OPS follows Intel’s OPS (Open Pluggable Standard). DS-270 is integrated
with an Intel®Celeron® J1900 Quad-Core processor and bundled with NVIDIA
GeForce GT730M graphics. It supports Ultra HD advanced graphic performance, up
to 3840x 2160@30MHz. To meet Intel’s OPS standard, the slot-in and cableless
design is able to reduce installation and maintain costs, as well as simplify usage,
maintenance, and the upgrading process.
For faster installation by Digital Signage customers, DS-270 OPS device is con-
nected via a JAE 80-pin connector which supports HDMI, DP, UART and USB3.0/
USB2.0 signals with the monitor. Through UART, it is easy to get status and manage-
ment reports.
DS-270 also has Giga LAN x1, HDMI x1 (up to 3840x2160@30MHz) and USB3.0 x2
via front I/O. DS-270 Digital Signage player empowers intelligent environments.
1.2 Product Features
1.2.1 Key Features
Intel® Celeron J1900 Quad-core processor
Follow Intel OPS (Open Pluggable Standard)
Support HDMI, DP, UART, and USB3.0/ USB2.0 signal by JAE 80-pin connector
Slot-in design and easy installation and maintain
1.2.2 Display
Supports up to Ultra HD (3840x 2160 @30MHz) video playback performance
(subject to the video media format and playback software)
1.2.3 Power Consumption
Idle: 11.82 W
Max.: 21.84 W

3 DS-270 User Manual
Chapter 1 General Introduction
1.3 Hardware Specifications
CPU: Intel® Celeron J1900 Quad-core processor
System Chipset: SoC solution
Graphic Chipset: NVIDIA GeForce GT730M
BIOS: AMI 64 Mbit Flash BIOS
System Memory: DDR3L 204 pin SO-DIMM x2 , up to 8GB (4GB per SO-
DIMM)
HDD: Supports 2.5" SATA HDD or SSD x1 (max 7mm height)
WatchDog timer: interval 255 seconds (depends on software setting)
I/O Interface
–JAE TX25 80-pin connector x1
–HDMI x1
–USB 3.0 x2 (compliant ports)
–Audio phone jack for Line-out x1
–Full-size mini-PCIe (internal) x1 (support mSATA)
Ethernet Chipset: 1 x Intel I211 (Gigabit LAN)
–Speed: 10/100/1000 Mbps
–Interface: 1 x RJ-45 jacks with LED
–Standard: IEEE 802.3z/ab (1000 Base-T) or IEEE 802.3u 100 Base-T
Resolution: HDMI: Up to 3840 x 2160 @ 30 Hz (Ultra HD)
Caution! For systems with only one RAM module, please insert the module into
the SODIMM 1 slot before system bootup.

DS-270 User Manual 4
1.4 Mechanical Specifications
1.4.1 Dimensions
200 x 118 x 30 mm (OPS compliant)
Figure 1.1 DS-270 Mechanical Dimensions (Unit: mm)
1.4.2 Weight
1.5 kg (3.3 lb)
1.5 Power Requirements
1.5.1 System Power:
Rating 12 ~ 24 VDC, 5-2.5A (Optional) via OPS connector
1.5.2 RTC Battery:
3 V/195 mAH BR2032
67.25
39.75
19
33.05
3.50
3.50
3.50
200
175
3.50
30
26
118
6825 25
13
13
4.02
Ø
18
100.04 3
3
3.50
6.10
192
R2.25
14.50
5
4.50
R4
Note! This product is intended to be supplied by a Listed Power Supply - rated
at 12-24Vdc, 5-2.5A minimum
Caution! There is a risk of explosion if the battery is replaced by an incorrect type.
Always dispose of batteries in accordance with safety instructions.

5 DS-270 User Manual
Chapter 1 General Introduction
1.6 Environmental Specifications
1.6.1 Operating Temperature
0° C - 40° C (32~104° F) w/ HDD ; 0° C - 50° C (32~122° F) w/ SSD
1.6.2 Relative Humidity
95% @ 40 °C (non-condensing)
1.6.3 Storage Temperature
-20 ~ 70 °C (-4 ~ 158 °F)
1.6.4 Vibration Loading During Operation (HDD)
0.2 Grms, IEC 60068-2-64, random, 5 ~ 500 Hz, 1 Oct./min, 1 hr/axis.
1.6.5 Safety
UL, CB, BSMI, CCC
1.6.6 EMC
CE, FCC Class B, BSMI, C-Tick

DS-270 User Manual 6

Chapter 2
2Hardware Installation
This chapter introduces external
I/O and the installation of DS-270
Hardware.

DS-270 User Manual 8
2.1 DS-270 I/O Connectors
2.1.1 Front I/O
2.1.2 Rear I/O
2.2 DS-270 External I/O Connectors
2.2.1 Power ON/OFF Button
DS-270 has a power ON/OFF button on the front side. Push this button to turn the
system ON and OFF. It also supports a 4 second delay soft power off.
Figure 2.1 Power ON/OFF Button
2.2.2 USB Connectors
DS-270 supports USB3.0 interface for 2pcs, which gives complete Plug and Play and
hot swapping capability for up to 127 external devices. The USB interface is compli-
ant with USB UHCI, Rev. 3.0. The USB interface supports Plug and Play, which
enables you to connect or disconnect a device without turning off the system.
Figure 2.2 USB Connector

9 DS-270 User Manual
Chapter 2 Hardware Installation
2.2.3 Ethernet Connector (LAN)
DS-270 provides one RJ-45 LAN interface connector, fully compliant with
IEEE802.3u 10/100/1000 Base-T CSMA/CD standards. The Ethernet port provides a
standard RJ-45 jack connector with LED indicators to show its Active/Link status and
speed status.
Figure 2.3 Ethernet Connector
2.2.4 Audio Connector
Line-Out: Stereo speakers, earphone or front surround speakers can be connected to
the Line-out jack.
Figure 2.4 Line-out
Table 2.1: USB3.0 Port Pin Assignments
Pin Signal Name
1 VBUS
2 USB Data-
3 USB Data+
4GND
5 StdA_SSRX-
6 StdA_SSRX+
7 GND_DRAIN
8 StdA_SSTX-
9 StdA_SSTX+
Table 2.2: LAN Connector Pin Assignments
Pin Signal Name
1MDI0+
2MDI0-
3MDI1+
4MDI1-
5GND
6GND
7MDI2+
8MDI2-

DS-270 User Manual 10
2.2.5 HDMI
DS-270 is designed for HDMI for 1pcs to communicate full video or sounds and fol-
low HDCP. HDMI follow HDCP standard simultaneously.
Figure 2.5 HDMI Connector
2.2.6 JAE TX-25 Connector
DS-270 supports JAE TX-25 80-in angle connector which plugs JAE TX-24 to a mon-
itor.
Figure 2.6 JAE TX-25 80-pin Connector
Table 2.3: HDMI Pin out
Pin Signal Name
1TMDSData2+
2 TMDS Data 2 shield
3TMDSData2-
4TMDSData1+
5 TMDS Data 1 shield
6TMDSData1-
7TMDSData0+
8 TMDS Data 0 shield
9 TTMDS Data 0-
10 TMDS Clock+
11 TMDS Clock shield
12 TMDS Clock-
13 CEC
14 Reserved
15 SCL
16 SDA
17 DDC/CEC Ground
18 +5V
19 Hot Plug Detect
Table 2.4: JAE-TX-25 Pin out
Pin Signal Name Pin Signal Name

11 DS-270 User Manual
Chapter 2 Hardware Installation
2.3 Hardware Installation
2.3.1 Storage Installation
1. To assemble the storage module, secure the HDD to HDD bracket with 2
screws.
1 DDP_3N 41 RSVD
2 DDP_3P 42 RSVD
3 GND 43 RSVD
4 DDP_2N 44 RSVD
5 DDP_2P 45 RSVD
6 GND 46 RSVD
7 DDP_1N 47 RSVD
8 DDP_1P 48 RSVD
9 GND 49 RSVD
10 DDP_0N 50 SYS_FAN
11 DDP_0P 51 UART_RXD
12 GND 52 UART_TXD
13 DDP_AUXN 53 GND
14 DDP_AUXP 54 StdA_SSRX-
15 DDP_HPD 55 StdA_SSRX+
16 GND 56 GND
17 TMD_CLK- 57 StdA_SSTX-
18 TMD_CLK+ 58 StdA_SSTX+
19 GND 59 GND
20 TMDS0- 60 USB_PN2
21 TMDS0+ 61 USB_PP2
22 GND 62 GND
23 TMDS1- 63 USB_PN1
24 TMDS1+ 64 USB_PP1
25 GND 65 GND
26 TMDS2- 66 USB_PN0
27 TMDS2+ 67 USB_PP0
28 GND 68 GND
29 HDMI_DDC_DATA 69 AZ_LINEOUT_L
30 HDMI_DDC_CLK 70 AZ_LINEOUT_R
31 HDMI_HPD 71 HDMI_CEC
32 GND 72 PB_
33 +12V~+24V 73 PS_ON#
34 +12V~+24V 74 PWR_STATUS
35 +12V~+24V 75 GND
36 +12V~+24V 76 GND
37 +12V~+24V 77 GND
38 +12V~+24V 78 GND
39 +12V~+24V 79 GND
40 +12V~+24V 80 GND
Table 2.4: JAE-TX-25 Pin out

DS-270 User Manual 12
2. Undo the top storage screws and remove.
3. Install the storage module into DS-270 as below, and connect the storage and
SATA connector onto the device.
4. Lastly, fix the storage module onto DS-270 via a single screw.
Figure 2.7 HDD Installation
Conn ec tor si de
HDD module
HDD module installation