Advantech DS-082 Series User manual

User Manual
DS-082
Ultra Slim
Digital Signage Player

DS-082 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2019
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. also reserves the
right to improve the products described in this manual at any time without notice. No
part of this manual may be reproduced, copied, translated, or transmitted in any form
or by any means without the prior written permission of Advantech Co., Ltd. Informa-
tion provided in this manual is intended to be accurate and reliable. However, Advan-
tech Co., Ltd. assumes no responsibility for its use, nor for any infringements on the
rights of third parties that may result from its use.
Acknowledgements
Award is a trademark of Award Software International, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor-
poration.
Intel® and ATOM® are trademarks of Intel Corporation.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd..
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology LTD.
CHRONTEL is a trademark of Chrontel Inc.
All other product names or trademarks are properties of their respective owners.
For more information about this and other Advantech products, please visit our web-
site at: http://www.advantech.com/ For technical support and service, please visit our
support website at: http://support.advantech.com.tw/support/
Part No. 2006008200 Edition 1
Printed in China August 2019

iii DS-082 User Manual
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse, abuse, accident, or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced at no charge during the warranty period. For out-of-war-
ranty repairs, customers are billed according to the cost of replacement materials,
service time, and freight. Please consult your dealer for more details.
If you suspect your product to be defective, follow the steps listed below:
1. Collect all information about the problem encountered (for example, CPU
speed, Advantech products used, other hardware and software used, etc.). Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Please have the manual, product,
and any relevant information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and proof of the purchase date (such as a photocopy of your sales
receipt) in a shippable container. Products returned without proof of purchase
date are not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package; then ship the
product prepaid to your dealer.
Declaration of Conformity
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the inter-
ference at his own expense.

DS-082 User Manual iv
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com for the latest prod-
uct information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you require additional assistance. Please have the
following information ready before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Warnings, Cautions, and Notes
Packing List
Before installation, please ensure that the following items have been shipped:
1 x DS-082 series player
1 x Driver/Utility Disk
1 x China RoHS Sheet
1 x User manual
1 x Mounting kit
1x 19V power adapter
Warning! Warnings indicate conditions, which if not observed, can cause personal
injury!
Caution! Cautions are included to help users avoid hardware damage and data
loses.
For example, “New batteries are at risk of exploding if incorrectly
installed. Do not attempt to recharge, force open, or heat the battery.
Replace the battery only with the same or equivalent type recom-
mended by the manufacturer. Discard used batteries according to the
manufacturer's instructions.”
Note! Notes provide additional information.

v DS-082 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect this equipment from all AC outlets before cleaning. Do not use liquid
or spray detergents for cleaning. Instead, use only a damp cloth.
4. For pluggable equipment, the power outlet socket should be located nearby and
easily accessible.
5. Protect this equipment from humidity.
6. Place this equipment on a reliable surface during installation. Dropping or letting
the equipment fall can cause damage.
7. The openings on the enclosure are for air convection to protect the equipment
from overheating. Do not cover the openings.
8. Ensure that power voltage is correct before connecting the equipment to a
power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If not used for a long time, disconnect the equipment from the power source to
avoid damage by transient overvoltage.
12. Never pour liquid into the openings. This can cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should only be
opened by qualified service personnel.
14. If one of the following occurs, have the equipment checked by authorized ser-
vice personnel:
The power cord or plug is damaged.
Liquid has penetrated the equipment.
The equipment has been exposed to moisture.
The equipment is malfunctioning, or does not operate according to the user
manual.
The equipment has been dropped or damaged.
The equipment shows obvious signs of breakage.
15. Do not store this equipment in an environment where the temperature fluctuates
below -20 °C (-4 °F) or above 60 °C (140 °F) as this can cause damage. The
equipment should be stored in a controlled environment.
16. CAUTION: Batteries are at risk of exploding if incorrectly installed. Replace only
with the same or equivalent type recommended by the manufacturer. Discard
used batteries according to the manufacturer’s instructions.
17. The sound pressure level at the operator's position according to IEC 704-1:1982
is no more than 70 dB (A).
18. RESTRICTED ACCESS AREA: The equipment should only be installed in a
Restricted Access Area.
19. DISCLAIMER: These instructions are provided according to IEC 704-1. Advan-
tech disclaims all responsibility for the accuracy of all statements contained
herein.

DS-082 User Manual vi
DS-082 Series Part Number
DS-082GB-T4A1E DS-082GB-U0A1E DS-082GBF-U0A1E DS-082GB-U6A1E DS-082GBF-U6A1E
DS082GB1901-T DS082GB1902-T DS082GB1903-T DS082GB1904-T DS082GB1905-T
DS082GB1906-T DS082GB1907-T DS082GB1908-T DS082GB1909-T DS082GB1910-T
DS082GB2001-T DS082GB2002-T DS082GB2003-T DS082GB2004-T DS082GB2005-T
DS082GB2006-T DS082GB2007-T DS082GB2008-T DS082GB2009-T DS082GB2010-T
DS082GB2101-T DS082GB2102-T DS082GB2103-T DS082GB2104-T DS082GB2105-T
DS082GB2106-T DS082GB2107-T DS082GB2108-T DS082GB2109-T DS082GB2110-T
DS082GB2201-T DS082GB2202-T DS082GB2203-T DS082GB2204-T DS082GB2205-T
DS082GB2206-T DS082GB2207-T DS082GB2208-T DS082GB2209-T DS082GB2210-T
DS082GB2301-T DS082GB2302-T DS082GB2303-T DS082GB2304-T DS082GB2305-T
DS082GB2306-T DS082GB2307-T DS082GB2308-T DS082GB2309-T DS082GB2310-T
DS082GB2401-T DS082GB2402-T DS082GB2403-T DS082GB2404-T DS082GB2405-T
DS082GB2406-T DS082GB2407-T DS082GB2408-T DS082GB2409-T DS082GB2410-T

1 DS-082 User Manual
Contents
Chapter 1 General Introduction ...........................1
1.1 Introduction ............................................................................................... 2
1.2 Product Features....................................................................................... 2
1.2.1 General ......................................................................................... 2
1.2.2 Display .......................................................................................... 2
1.2.3 Thermal Solution........................................................................... 2
1.3 Hardware Specifications ........................................................................... 3
1.4 Mechanical Specification........................................................................... 4
1.4.1 Dimension ..................................................................................... 4
Figure 1.1 Dimensions................................................................. 4
1.4.2 Weight........................................................................................... 4
1.5 Power Requirements................................................................................. 5
1.5.1 System Power:.............................................................................. 5
1.5.2 RTC Battery: ................................................................................. 5
1.6 Environmental Specifications .................................................................... 5
1.6.1 Operating Temperature................................................................. 5
1.6.2 Relative Humidity .......................................................................... 5
1.6.3 Storage Temperature.................................................................... 5
1.6.4 Vibration Loading During Operation (HDD) .................................. 5
1.6.5 Shock During Vibration ................................................................. 5
1.6.6 Safety............................................................................................ 5
1.6.7 EMC .............................................................................................. 5
Chapter 2 Hardware Installation ..........................7
2.1 DS-082 Series I/O Connectors.................................................................. 8
Figure 2.1 Front View .................................................................. 8
Figure 2.2 Rear View ................................................................... 8
2.2 DS-082 Series External I/O Connectors ................................................... 8
2.2.1 Power ON/OFF Button.................................................................. 8
Figure 2.3 Power Button .............................................................. 8
2.2.2 DC Input Connector ...................................................................... 8
Figure 2.4 DC Input Connector.................................................... 8
2.2.3 LAN Connector ............................................................................. 9
Figure 2.5 LAN Connector ........................................................... 9
2.2.4 HDMI Connector ......................................................................... 10
Figure 2.6 HDMI Connector....................................................... 10
2.2.5 USB Connectors ......................................................................... 11
Figure 2.7 USB Connector......................................................... 11
2.2.6 COM Connector .......................................................................... 11
Figure 2.8 COM Connector........................................................ 11
2.2.7 Audio Connectors ....................................................................... 12
Figure 2.9 Audio Connector....................................................... 12
2.3 Hardware Installation .............................................................................. 12
2.3.1 Storage Installation (M.2 2242)................................................... 12
Figure 2.10M.2 Storage Installation............................................ 12
2.3.2 M.2 2230 Module/Memory Module Installation ........................... 13
Figure 2.11M.2 2230 Module / Memory Module Installation....... 13
2.3.3 Mounting Bracket Installation...................................................... 14
Figure 2.12Mounting Bracket Installation ................................... 14
2.3.4 Mounting Direction ...................................................................... 14
Figure 2.13Mounting Direction.................................................... 14

DS-082 User Manual 2

Chapter 1
1General Introduction
This chapter gives background
information on the DS-082 series.

DS-082 User Manual 2
1.1 Introduction
DS-082 series is powered by AMD Ryzen V1000 & R1000 processors for 4K video
playback performance. DS-082 series is a media player that delivers advanced
graphics performance for all your signage applications. DS-082 series has 3/4 HDMI
to provide multi display outputs simultaneously. For better connectivity, it supports 1x
LAN, internal 1 x M.2 2230 interface for add-on functions such as wireless network/
Bluetooth fulfill different requirements. It also supports 4x USB (2.0x2, 3.0x2),
1xCOM ports for system integration and applications.
1.2 Product Features
1.2.1 General
Supports AMD Ryzen V1807B/V1605B/R1606G processors
Supports 3/4 x HDMI, 1 x GbE, 4 x USB, 1 x COM (RS-232)
Supports M.2 2242 M Key for storage
Built-in M.2 2230 E Key slot for easy expansion
Ultra Slim Features, easy to install. Easy integration and easy maintenance
1.2.2 Display
HDMI 2.0 x 4 @3840x2160@60Hz (DS-082GB-T4A1E / DS-082GB-U0A1E /
DS-082GBF-U0A1E)
HDMI 2.0 x 3 @3840x2160@60Hz (DS-082GB-U6A1E / DS-082GBF-U6A1E)
1.2.3 Thermal Solution
Active Blower
(DS-082GB-T4A1E / DS-082GB-U0A1E / DS-082GB-U6A1E)
Fanless
(DS-082GBF-U0A1E / DS-082GBF-U6A1E)

3 DS-082 User Manual
Chapter 1 General Introduction
1.3 Hardware Specifications
CPU: AMD V1807B/V1605B/R1606G
System Chipset: Integrated in SOC
Graphic chipet: Integrated graphics built in Processor
BIOS AMI uEFI 128 Mbit
System Memory: 2 x 260pin DDR4 SODIMM, Up to 16GB single DIMM
Storage: M.2 2242 M Key
Watchdog Timer: supported by Advantech SUSIAccess
IO Interfaces
–1 x RS-232
–3/4 x HDMI
–4 x USB (2.0 x 2, 3.0 x 2)
–1 x (SPDIF/Line-out/ Mic-in), support Jack Sense
Ethernet Chipset: 1 x RTL8111G
–Speed: 100/1000 Mbps
–Interface: 1 x RJ-45 jacks with LED
–Standard: IEEE 802.3z/ab (1000 Base-T), IEEE 802.3u 100 Base-T compli-
ant
Resolution
–3840 x 2160 @ 60Hz
Expansion
–M.2 2230 E Key x 1

DS-082 User Manual 4
1.4 Mechanical Specification
1.4.1 Dimension
180 x 190 x 19mm (L x W x H)
Figure 1.1 Dimensions
1.4.2 Weight
0.87 kg (1.92 lbs)

5 DS-082 User Manual
Chapter 1 General Introduction
1.5 Power Requirements
1.5.1 System Power:
Minimum power input: DC19V, 3.42A (DS-082GB-U0A1E/ DS-082GBF-U0A1E/ DS-
082GB-U6A1E/ DS-082GBF-U6A1E)
Minimum power input: DC19V, 4.74A (DS-082GB-T4A1E)
1.5.2 RTC Battery:
BATTERY 3V 195mAH BR2032
1.6 Environmental Specifications
1.6.1 Operating Temperature
0° C - 40°C (32~122°F) with 0.7 m/s airflow
1.6.2 Relative Humidity
95% @ 40°C ( Non Condensing )
1.6.3 Storage Temperature
-20 ~ 60°C (-4~140°F)
1.6.4 Vibration Loading During Operation (HDD)
0.5 Grms, IEC 60068-2-64, random, 5 ~ 500 Hz, 1 hr/axis.
1.6.5 Shock During Vibration
20 G, IEC 60068-2-27, half sine, 11 ms duration
1.6.6 Safety
UL, BSMI, CCC
1.6.7 EMC
CE, FCC Class B, BSMI, CCC

DS-082 User Manual 6

Chapter 2
2Hardware Installation
This chapter introduces external
I/O and the installation of DS-082
series hardware.

DS-082 User Manual 8
2.1 DS-082 Series I/O Connectors
Figure 2.1 Front View
Figure 2.2 Rear View
2.2 DS-082 Series External I/O Connectors
2.2.1 Power ON/OFF Button
DS-082 Series has a power ON/OFF button on the front side. Push this button to turn
the system ON and OFF. It also supports a 5 second delay soft power off.
Figure 2.3 Power Button
2.2.2 DC Input Connector
DS-082 Series supports 19VDC DC power in.
Figure 2.4 DC Input Connector

9 DS-082 User Manual
Chapter 2 Hardware Installation
2.2.3 LAN Connector
DS-082 Series provides one RJ-45 LAN interface connector, fully compliant with
IEEE802.3u 10/100/1000 Base-T CSMA/CD standards. The Ethernet port provides a
standard RJ-45 jack connector with LED indicators to show its Active/Link status and
speed status.
Figure 2.5 LAN Connector
LAN Port Pin Assignments
Pin Signal
1MDI0+
2MDI0-
3MDI1+
4MDI1-
5GND
6GND
7MDI2+
8MDI2-
9MDI3+
10 MDI3-
11 VCC
12 ACT
13 +V3.3 & Link1000#
14 +V3.3 & Link100#

DS-082 User Manual 10
2.2.4 HDMI Connector
The HDMI (High-Definition Multimedia Interface) provides an all-digital audio/video
interface to transmit the uncompressed audio/video signals and is HDCP compliant.
Connect the HDMI audio/video device to this port. HDMI technology can support a
maximum resolution of 3840 x 2160 @ 60 Hz but the actual resolution supported
depends on the monitor being used.
Figure 2.6 HDMI Connector
HDMI Pin Assignments
Pin Signal
1TMDSData2+
2 TMDS Data 2 shield
3TMDSData2-
4TMDSData1+
5 TMDS Data 1 shield
6TMDSData1-
7TMDSData0+
8 TMDS Data 0 shield
9 TTMDS Data 0-
10 TMDS Clock+
11 TMDS Clock shield
12 TMDS Clock-
13 CEC
14 Reserved
15 SCL
16 SDA
17 DDC/CEC Ground
18 +5V
19 Hot Plug Detect

11 DS-082 User Manual
Chapter 2 Hardware Installation
2.2.5 USB Connectors
DS-082 Series provides four USB interface connectors, which gives complete Plug &
Play and hot swapping capability for up to 127 external devices. The USB interface is
compliant with USB UHCI, Rev. 3.0/2.0. The USB interface supports Plug and Play,
which enables you to connect or disconnect a device without turning off the system.
Figure 2.7 USB Connector
2.2.6 COM Connector
DS-082 Series provides one D-sub 9-pin connectors serial communication interface
port. The ports support RS-232 communications.
Figure 2.8 COM Connector
USB Port Pin Assignments
Pin Signal
1VCC
2 USB Data-
3 USB Data+
4GND
COM Port Pin Assignments
Pin Signal
1 DCD
2RxD
3TxD
4DTR
5GND
6DSR
7RTS
8CTS
9RI

DS-082 User Manual 12
2.2.7 Audio Connectors
DS-082 Series S/PDIF can be connected to Stereo speakers, earphone or surround
speakers.
Figure 2.9 Audio Connector
2.3 Hardware Installation
2.3.1 Storage Installation (M.2 2242)
1. Remove the top cover by loosening the fixing screws
2. Install M.2 2242 module and fix screw
Figure 2.10 M.2 Storage Installation