Advantech PPC-6151C User manual

User Manual
PPC-6151C/6171C
15"/17" Configurable Panel PC
Chassis with Selectable Mini-ITX
Motherboard

PPC-6151C/6171C User Manual ii
Copyright
The documentation and software included with this product are copyrighted 2017 by
Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to
improve the products described in this manual at any time without notice. No part of
this manual may be reproduced, copied, translated, or transmitted in any form or by
any means without the prior written permission of Advantech Co., Ltd. The informa-
tion provided in this manual is intended to be accurate and reliable. However, Advan-
tech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the
rights of third parties that may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows is registered trademark of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse, abuse, accident, or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced at no charge during the warranty period. For out-of-war-
ranty repairs, customers will be billed according to the cost of replacement materials,
service time, and freight. Please consult your dealer for more details.
If you think you have a defective product, follow the steps outline below.
1. Collect all the information about the problem encountered (for example, CPU
speed, Advantech products used, other hardware and software used, etc.). Note
anything abnormal and list any onscreen messages received when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any relevant information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and a proof of purchase date (such as a photocopy of your sales
receipt) into a shippable container. Products returned without a proof of pur-
chase date are not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package, then ship the pack-
age prepaid to your dealer.
Part No. 2003C61550 Edition 1
Printed in China June 2017

iii PPC-6151C/6171C User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
type of cable is available from Advantech. Please contact your local supplier for
ordering information.
CE
This product has passed the CE test for environmental specifications. Test conditions
for passing included the equipment being operated within an industrial enclosure. To
protect the product from damage due to electrostatic discharge (ESD) or EMI leak-
age, we strongly recommend the use of CE-compliant industrial enclosure products.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference, in
which case users are required to correct the interference at their own expense.
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information to hand before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–Comprehensive description of the problem
–The exact wording of any error messages

PPC-6151C/6171C User Manual iv
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect the equipment from all AC outlets before cleaning. Use only a damp
cloth for cleaning. Do not use liquid or spray detergents.
4. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
5. Protect this equipment from humidity.
6. Place this equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7. The openings of the enclosure are for air convection. Protect the equipment
from overheating. Do not cover the openings.
8. Ensure that the power source voltage is correct before connecting the equip-
ment to the power outlet.
9. Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If not used for a long time, disconnect the equipment from the power source to
avoid damage from transient overvoltage.
12. Never pour liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following occurs, have the equipment checked by service person-
nel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment is malfunctioning, or does not operate according to the user
manual.
The equipment has been dropped and damaged.
The equipment shows obvious signs of breakage.
15. Do not leave this equipment in an environment with a storage temperature of
below -20 °C (-4 °F) or above 60 °C (140 °F) as this can cause damage. The
equipment should be stored in a controlled environment.
16. CAUTION: Batteries are at risk of exploding if incorrectly replaced. Replace only
with the same or equivalent type recommend by the manufacturer. Discard used
batteries according to the manufacturer’s instructions.
ATTENTION: Danger d'explosion si la batterie est mal REMPLACE. REM-
PLACER UNIQUEMENT PAR LE MEME TYPE OU EQUIVALENT RECOM-
MANDÉ PAR LE FABRICANT, jeter les piles usagées SELON LES INSTRUC-
TIONS DU FABRICANT.
The sound pressure level at the operator's position does not exceed 70 dB (A) in
accordance with IEC 704-1:1982 specifications.
DISCLAIMER: These instructions are provided according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
Caution! Pour éviter tout risque d'électrocution, ne pas enlever le couvercle.
Aucune pièce réparable par l'utilisateur ne se trouve à l'intérieur. Confier
tout entretien à un personnel qualifié uniquement.

v PPC-6151C/6171C User Manual
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from the PC chassis
before manual handling. Do not touch any components on the CPU card or
other cards while the PC is switched on.
Disconnect all power before making any configuration changes. The sudden
rush of power when you connect a jumper or install a card may damage sensi-
tive electronic components.
Power Warning
The power is suitable for areas with an altitude of 5000 M and below.
Battery Information
Batteries, battery packs, and accumulators should not be disposed of in unsorted
household waste. Please use the public collection system to return, recycle, or treat
them in compliance with your local regulations.

PPC-6151C/6171C User Manual vi
Initial Inspection
Upon opening the carton, check that the items below have been included in your
shipment.
Model Item Qty Image
PPC-6151C/6171C-
RTAE
Chassis 1
Riser card PCIe x4 1
Riser card PCI 1
User manual 1
Warranty card 1
HDD screws 4
M/B and riser card screws 6
Panel bracket and screws 10
Mini PCIe screw 1

vii PPC-6151C/6171C User Manual
Model Item Qty Image
PPC-6151C/6171C-
RMAE
Chassis 1
Riser card PCIe x4 1
Riser card PCI 1
DP input cable 1
USB input cable 1
SATA cable 1
SATA power cable 1
User manual 1
Warranty card 1
HDD screws 8
M/B and riser card screw 6
Panel bracket and screws 10
DC bracket 1
DC bracket screws 2
Mini PCIe screw 1

PPC-6151C/6171C User Manual viii
If any of the aforementioned items are missing or damaged, contact your distributor
or sales representative immediately. We have carefully inspected the product
mechanically and electrically before shipment. The product should be free of marks
and scratches and in perfect working order upon receipt. As you unpack the product,
check the equipment for signs of shipping damage (for example, damaged box,
scratches, dents, etc.). If the product is damaged or fails to meet the specifications,
notify our service department or your local sales representative immediately. Addi-
tionally, please notify the carrier. Retain the shipping carton and packing material for
inspection by the carrier. After inspection, we will make arrangements to repair or
replace the unit.

ix PPC-6151C/6171C User Manual
Contents
Chapter 1 Introduction..........................................1
1.1 Overview ................................................................................................... 2
1.2 Features .................................................................................................... 2
1.3 Chassis Comparison ................................................................................. 3
1.4 Specifications ............................................................................................ 4
1.4.1 Specification Comparison ............................................................. 4
1.4.2 General Specifications .................................................................. 4
1.5 External View ............................................................................................ 5
1.6 System View ............................................................................................. 7
1.7 Dimensions ............................................................................................... 8
Figure 1.1 PPC-6151C dimensions ............................................. 8
Figure 1.2 PPC-6171C dimensions ............................................. 9
Chapter 2 System Installation and Setup .........11
2.1 Anti-Static Precautions............................................................................ 12
2.2 Installation Procedures............................................................................ 12
2.3 PPC-6151C/6171C-RTAE Motherboard Installation ............................... 13
2.3.1 Remove the Back Cover ............................................................. 13
2.3.2 Remove the Reinforced Board.................................................... 13
2.3.3 Check and Adjust Jumpers on the Motherboard......................... 14
2.3.4 Install the PPC-MB-8260AE Motherboard ................................. 16
2.3.5 Connect the Motherboard Wires................................................. 17
2.4 PPC-6151C/6171C-RMAE Motherboard Installation .............................. 18
2.4.1 Remove the Back Cover ............................................................. 18
2.4.2 Remove the Reinforced Bracket ................................................. 18
2.4.3 Check Jumper Setting of the Chassis......................................... 19
2.4.4 Install the Mini-ITX Motherboard (AIMB-275) ............................. 21
2.4.5 Connect the Motherboard Wires................................................. 22
2.4.6 Connect the Daughter Board and Motherboard Using a Cable .. 25
2.5 Component Setup ................................................................................... 26
2.5.1 CPU Installation .......................................................................... 26
2.5.2 CPU Cooler Installation............................................................... 27
2.5.3 Memory Installation..................................................................... 27
2.5.4 HDD Installation .......................................................................... 29
2.5.5 Wi-Fi Module Installation............................................................. 30
2.5.6 Expansion Card Installation ........................................................ 33
2.5.7 Rear Cover Installation ............................................................... 34
2.6 Mount Installation .................................................................................... 35
2.7 Quick Installation..................................................................................... 36
Chapter 3 System Maintenance.........................39
3.1 Introduction ............................................................................................. 40
3.2 AC Power Supply Replacement.............................................................. 40
3.3 Daughter Board Replacement................................................................. 41
3.4 System Fan Replacement....................................................................... 42
3.5 LCD and Touch Panel Replacement....................................................... 43
Appendix A PCI/PCIE Riser Card..........................45
A.1 Riser Card Introduction ........................................................................... 46

PPC-6151C/6171C User Manual x
A.1.1 PPCB-003 PCI Riser Card.......................................................... 46
A.1.2 PPCB-006 PCIE x4 Riser Card .................................................. 46
A.1.3 EAMB-BE02 2 x PCIe x 1 Riser Card......................................... 47
A.1.4 EAMB-BE03 1 x PCIe x 1+1 x PCI Riser Card........................... 48
Appendix B BSMI ROHS........................................49
B.1 BSMI ROHS............................................................................................ 50
B.2 BSMI 警語及注意事項........................................... 50
Appendix C China ROHS....................................... 51
C.1 China ROHS ........................................................................................... 52

Chapter 1
1Introduction
Overview
Features
Chassis Comparison
Specifications
External View
System View
Dimensions

PPC-6151C/6171C User Manual 2
1.1 Overview
The PPC-6151C/6171C is a panel PC chassis developed for Mini-ITX motherboards
and equipped with a 15"/17" TFT LED panel. PPC-6151C/6171C supports many
diverse Mini-iTX motherboards to satisfy customer requirements regarding price and
functionality.
PPC-6151C/6171C features a true flat bezel to meet market demands for stylish
design, as well as an additional reservation port and expansion slot to accommodate
various applications. The PPC-6151C/6171C series devices were developed follow-
ing two design concepts - one is an optimized design, which can be equipped with a
motherboard designed by Advantech’s PPC team; the other is a compatible design,
which can be equipped with other Mini-ITX form factor motherboards.
1.2 Features
15"/17" true-flat PPC with resistive touch
Supports certified Mini-ITX motherboards, up to 45W TDP processor
Supports a PCI or PCIe expansion slot
Front LED indicators for power status
Front panel is IP65 compliant
Optional VESA mount upon request

3 PPC-6151C/6171C User Manual
Chapter 1 Introduction
1.3 Chassis Comparison
Chassis P/N PPC-6151C/6171C-RTAE PPC-6151C/6171C-RMAE
Purpose Highly optimized Highly compatible
Supported
mother board
type
Must follow design guide Compatible with most Mini-ITX mother-
boards certified by Advantech
Daughter
board Unnecessary Necessary (additional cabling for external USB and DP)
Riser card 2 slots 1 slot
HDD kit 1 2
Speaker 2 x 1W Optional
Advantage
1. Decreasing number of cables
2. Cost effective (w/o daughter
board)
1. Compatible with most Mini-ITX mother-
boards
Internal box
structure
I/O view
A. Power Switch C. AC inlet
B. Reservation port D. PPC-MB-8260AE I/O port
A. Power Switch E. USB2.0 (input, for connecting
B. Reservation port M/B and touch controller)
C. AC inlet F. Display port (input, for connecting
D. Mini-ITX M/B I/O port M/B and touch controller)
Note! Users can determine which chassis they are using by observing whether
the system features a USB port and a DP port. After identifying the
chassis type, refer to Chapters 2.3 and 2.4 (PPC-6151C/6171C-
RTAE&PPC-6151C/6171C-RMAE) for installation.
Note! When selecting a motherboard, please refer to the PPC-6151C/6171C's
selection guide.

PPC-6151C/6171C User Manual 4
1.4 Specifications
1.4.1 Specification Comparison
1.4.2 General Specifications
Product PPC-6151C-RTAE/RMAE PPC-6171C-RTAE/RMAE
LCD Specification 15” LCD 17” LCD
Display Type 15” TFT LCD (LED backlight) 17” TFT LCD (LED backlight)
Max. Resolution 1024 x 768 1280 x 1024
Dot matrix 0.297 x 0.297 mm 0.264 x 0.264 mm
Viewing Angle 80(left), 80(right)
70(top), 70(bottom)
80(left), 80(right)
80(top), 60(bottom)
Brightness 400 cd/m2 350 cd/m2
Contrast 700 800
Weight 5.03Kg (11.08 lb) 5.4Kg (11.9 lb)
Dimensions 391.4 x 312.5 x 103.6 mm
(15.4 x 12.3 x 4.08”)
437 x 357 x 107.6 mm
(17.2 x 14.06 x 4.2”)
Chassis Features
PPC-6151C/6171C-RTAE PPC-6151C/6171C-RMAE
Storage 1 x 2.5" SATA bay 2 x 2.5" SATA bay
I/O
2 x WLAN antenna ports
1 x AC jack
1 x Power switch
1 x VGA
1 x DP
1 x DIO
4 x RS232
1 x RS232/422/485
2 x LAN
4 x USB 3.0
1 x Line-Out
1 x Mic-In
4 x Reserved connectors
(DB9)
1 x AC jack
1 x Power switch
1 x DP interface
1 x USB 2.0
Reserved ports: According
to motherboard specifica-
tions
Expansion
Either 1 x PCIe x4
or 2 x PCI (in the acces-
sory box)
Either 1 x PCIe x4
or 1 x PCI (in the accessory
box)
Speaker 2 x 1W 2 x 1W (optional)
Fan 2 x 12V (60 x 60 x 15 mm)
OS Support OS Support Based on motherboard specifications
Power Consumption Input Voltage 100 ~ 240 VAC, 250W
LCD Display Backlight
Lifetime 50,000 hours minimum
Touchscreen
Touch Type Analog resistive 5-wire/projected capacitive (optional)
Light
Transmission 80+/-5%
Controller USB interface
Durability
(Touches) 35 million

5 PPC-6151C/6171C User Manual
Chapter 1 Introduction
1.5 External View
The front of PPC-6151C/6171C is a flat panel LCD screen enclosed in an AL frame.
(When placed upright on a desk, the PPC-6151C/6171C front panel appears as
shown below.)
Environment
Operating
Temperature 0 ~ 50 °C (32 ~ 122 °F)
Storage
Temperature -40 ~ 60 °C (-40 ~ 140 °F)
Relative
Humidity 10 ~ 95% @ 40 °C (non-condensing)
Shock Operating 10 G peak acceleration (11 ms duration), fol-
lows IEC 60068-2-27
Vibration Operating random vibration test 5 ~ 500Hz, 1Grms
@with HDD, follows IEC 60068-2-64
EMC CE, FCC Class A
Front Panel
Protection IP65 compliant
Note! *1 x DP (for connecting the motherboard and LVDS panel)
*1 x USB 2.0 (for connecting the motherboard and touch controller)
PPC-6151C/6171C-RTAE off (S3,S4,S5):Orange ; On (S0): Blue
PPC-6151C/6171C-RMAE off (S3,S4,S5):Orange or off ; On (S0): Blue

PPC-6151C/6171C User Manual 6
1. Air outlets
2. Antenna holes
3. Quick installation clip (1)
4. Panel mount bracket holes (10 on PPC-6151C/6171C)
5. Air inlets
22
3 1
4
5
5

7 PPC-6151C/6171C User Manual
Chapter 1 Introduction
1.6 System View
PPC-6151C/6171C-RTAE barebone chassis PPC-6151C/6171C-RMAE barebone chassis
With PPC-MB-8260AE motherboard With AIMB-275G motherboard

PPC-6151C/6171C User Manual 8
1.7 Dimensions
PPC-6151C:
Figure 1.1 PPC-6151C dimensions
303
382
310.40
379.36
Cut out
103.60
7.50
391.40
312.50
75
100
75
100

9 PPC-6151C/6171C User Manual
Chapter 1 Introduction
PPC-6171C:
Figure 1.2 PPC-6171C dimensions
Fixed VESA screw specification: M4; screw depth: 8 mm (Max)
Warning! Use suitable mounting apparatus to avoid risk of injury.
427
347
345
425
437
357
2.
Max. depth for VESA mounting screw is M4*8L(mm).1.
Optional kit for VESA mounting.
Cut-out dimention: 427mm*347mm.
7.50
107.60

PPC-6151C/6171C User Manual 10