AEMC SL206 User manual

AC/DC Current Probe
Model SL206
USER MANUAL
I
1 V/A
10 mV/A
OFF
ZERO
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

Statement of Compliance
Chauvin Arnoux
®
, Inc. d.b.a. AEMC
®
Instruments
certifies that this instrument has been calibrated
using standards and instruments traceable to
international standards.
We guarantee that at the time of shipping your
instrument has met its published specifications.
An NIST traceable certificate may be
requested at the time of purchase, or obtained
by returning the instrument to our repair and
calibration facility, for a nominal charge.
The recommended calibration interval for this
instrument is 12 months and begins on the date of
receipt by the customer. For recalibration, please
use our calibration services. Refer to our repair and
calibration section at www.aemc.com.
Serial #:
Catalog #:
1201.45
Model #: SL206
Please fill in the appropriate date as indicated:
Date Received:
Date Calibration Due:
Chauvin Arnoux
®
, Inc.
d.b.a AEMC
®
Instruments
www.aemc.com
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

Limited Warranty
The AC/DC Current Probe Model SL206 is warranted to the owner for a
period of 1 year from the date of original purchase against defects in
manufacture. This limited warranty is given by AEMC®Instruments, not by
the distributor from whom it was purchased. This warranty is void if the unit
has been tampered with, abused or if the defect is related to service not
performed by AEMC®Instruments.
For full and detailed warranty coverage, please read the Warranty Coverage
Information, which is attached to the Warranty Registration Card (if
enclosed) or is available at www.aemc.com. Please keep the Warranty
Coverage Information with your records.
What AEMC®Instruments will do:
If a malfunction occurs within the one-year period, you may return the
instrument to us for repair, provided we have your warranty registration
information on file or a proof of purchase. AEMC®Instruments will, at its
option, repair or replace the faulty material.
YOU CAN NOW REGISTER ONLINE AT:
www.aemc.com
Warranty Repairs
First, request a Customer Service Authorization Number (CSA#) by phone or
by fax from our Service Department (see address below), then return the
instrument along with the signed CSA Form. Please write the CSA# on the
outside of the shipping container. Return the instrument, postage or
shipment pre-paid to:
Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments
15 Faraday Drive • Dover, NH 03820 USA
Tel: [phone] (Ext. 360)
[phone] (Ext. 360)
Fax: [phone] or [phone]
[email protected]
Caution: To protect yourself against in-transit loss, we recommend you
insure your returned material.
NOTE: All customers must obtain a CSA# before returning any instrument.
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

AC/DC Current Probe Model SL206
Table of Contents
Warning.....................................................................................................3
Limited Warranty.......................................................................................3
Warranty Repairs ......................................................................................3
International Electrical Symbols................................................................3
Definition of Measurement Categories......................................................4
Receiving Your Shipment..........................................................................4
Packaging..................................................................................................4
Compatibility..............................................................................................4
Description ................................................................................................5
Control and Connector Identification.........................................................5
Specifications............................................................................................6
Electrical Specifications.........................................................................6
Mechanical Specifications.....................................................................7
Safety Specifications.............................................................................8
Frequency Response Curves (Typical).....................................................9
Operation.................................................................................................10
Connection ..........................................................................................10
Zeroing the Probe................................................................................10
Current Measurement..........................................................................11
Maintenance............................................................................................11
Warning ...............................................................................................11
Cleaning...............................................................................................11
Battery Replacement...........................................................................11
Repair and Calibration ............................................................................12
Technical and Sales Assistance .............................................................12
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

AC/DC Current Probe Model SL206
- 3 -
Warning
These safety warnings are provided to ensure the safety of
personnel and proper operation of the instrument.
Connect the probe to the oscilloscope or voltage measuring
instrument before clamping the probe around a conductor.
NEVER use the probe on circuits rated higher than 600V.
NEVER leave the probe clamped around a conductor while it
is not connected to a voltage measuring instrument or DMM.
Carefully center the conductor inside the probe jaws and
ascertain that the probe is perpendicular to the conductor
before closing the jaws.
AVOID, if possible, the proximity of other conductors which
may create noise.
Check the magnetic mating surfaces of the probe jaws;
these should be free of dirt, rust, or other foreign matter.
Do not use a probe that is cracked, damaged, or has
defective leads.
International Electrical Symbols
This symbol signifies that the instrument is protected by double
or reinforced insulation. Use only specified replacement parts
when servicing the instrument.
This symbol signifies CAUTION! and requests that the user refer
to the user manual before using the instrument.
Risk of electric shock. The voltage at the parts marked with this
symbol may be dangerous.
This is a type A current sensor. This symbol signifies that
application around and removal from HAZARDOUS LIVE
conductors is permitted.
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

AC/DC Current Probe Model SL206
- 4 -
Definition of Measurement Categories
CAT I: For measurements on circuits not directly connected to the AC
supply wall outlet such as protected secondaries, signal level,
and limited energy circuits.
CAT II: For measurements performed on circuits directly connected to
the electrical distribution system. Examples are measurements
on household appliances or portable tools.
CAT III: For measurements performed in the building installation at the
distribution level such as on hardwired equipment in fixed
installation and circuit breakers.
CAT IV: For measurements performed at the primary electrical supply
(<1000V) such as on primary overcurrent protection devices,
ripple control units, or meters.
Receiving Your Shipment
Upon receiving your shipment, make sure that the contents are
consistent with the packing list. Notify your distributor of any missing
items. If the equipment appears to be damaged, file a claim immediately
with the carrier and notify your distributor at once, giving a detailed
description of any damage.
Packaging
The AC/DC Current Probe Model SL206 (Cat. #1201.45) is shipped with
one 9V battery (not installed) and this user manual.
Compatibility
The AC/DC Current Probe Model SL206 is compatible with any DMM,
voltmeter, or other voltage-measuring instrument that has the following
features:
Range and resolution capable of displaying 1mV of input.
Voltmeter accuracy (uncertainty) of 0.75% or better to take full
advantage of the accuracy of the probe.
Minimum input impedance of 100k(1V/A range) or 10k
(10mV/A range).
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

AC/DC Current Probe Model SL206
- 5 -
Description
AC/DC Current Probe Model SL206 measures low DC or AC from 10mA
to 80ADC, 60AAC. This battery-powered clamp-on probe may be used
with digital multimeters, voltmeters, or other voltage-measuring
instruments. The probe jaws clamp around the conductor under test,
allowing current measurements without breaking the circuit. Hall sensor
technology senses the magnetic field produced by the current measured,
and generates a millivolt DC or AC output signal. The narrow jaw is
designed for optimum use in crowded wiring in industrial and automotive
environments.
Control and Connector Identification
I
1 V/A
10 mV/A
OFF
ZERO
Current Flow for DC Measurements
Zero Adjust Knob
ø = 0.46" (11.8 mm)
Battery Compartment Cover
Power Indication LED
Range Selection Switch
Battery
Compartment
Screw
Figure 1
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

AC/DC Current Probe Model SL206
- 6 -
Specifications
ELECTRICAL SPECIFICATIONS
Current Range: 10mA to 80ADC; 50mA to 60AAC
Output Signal: 1mV/mA and 10mV/AAC/DC
Accuracy and Phase Shift*:
Range 1mV/mA (1V/A) 10mV/A
Current Range(1) 10mA to 2ADC
10mA to 1.5AAC 50mA to 80A
Output Signal 1V at 1AAC/DC 1V at 100AAC/DC
Accuracy %
of Reading 2% of Reading
± 5mA
50mA to 50ADC: 4%
of R ± 20mA
50mA to 40AAC: 4%
of R ± 20mA
50 to 80ADC: ±12% of R
40 to 60AAC: ±12% of R
Frequency Range DC to 2kHz DC to 8kHz
Phase Shift DC to 65Hz: 1° DC to 65Hz: 1°
Load Impedance 100kmin 10kmin
Noise DC to 1Hz: 1.5mV
1Hz to 10kHz: 14mV
10 to 100kHz: 18mV
DC to 1Hz: 15µV
1Hz to 10kHz: 140µV
10 to 100kHz: 180µV
(1) The maximum permitted value is only limited by the cross section of the primary conductor.
Saturation of the magnetic core of the clamp occurs, which is not dangerous. A high residual
magnetism may remain which can be eliminated by demagnetizing the clamp.
Overload: 120A continuous
Working Voltage: 600Vrms max
Common Mode Voltage: 600Vrms max
Battery: 9V alkaline (NEDA 1604A, IEC 6LR61)
Battery Life: 68 hours typical
Typical Consumption: 6mA
Low Battery: Green LED when 6.5V
(*Reference conditions: 23°C ± 5°K, 20 to 75% RH, 48 to 65Hz, external magnetic field < 40A/m,
no external current carrying conductor, test sample centered, load impedance 1M
 )
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

AC/DC Current Probe Model SL206
- 7 -
MECHANICAL SPECIFICATIONS
Operating Temperature:
32° to 122°F (0° to 50°C)
Storage Temperature:
-22° to 176°F (-30° to 80°C)
Temperature Influence:
< 0.2% per °C
Operating Relative Humidity:
10° to 30°C: 85% ± 5% RH
(without condensation)
40° to 50°C: 45% ± 5% RH
(without condensation)
Maximum Cable Diameter:
0.46" (11.8mm)
Zero Adjustment:
20 turn potentiometer (±1.5A min)
Handle:
Lexan®920 A, UL 94 V2
Case Protection:
IP20 per IEC 529
Drop Test:
1.0 m on 38mm of oak on concrete;
test according to IEC 1010
Mechanical Shock:
100G, test per IEC 68-2-27
Vibration:
Test per IEC 68-2-6,
Frequency Range:
10Hz to 55Hz, Amplitude: 0.15mm
Dimensions:
9.09 x 1.42 x 2.64" (231 x 36 x 67mm)
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

AC/DC Current Probe Model SL206
- 8 -
Weight:
11.6 oz (330g) with battery
Color:
Dark gray
Output:
Double insulated 5 ft (1.5m) lead with safety banana plugs
SAFETY SPECIFICATIONS
Electrical:
600V Category III, Pollution: 2
Double insulation or reinforced insulation between primary or secondary
and outer case of handle per IEC 1010-2-32
Electromagnetic Compatibility
EN 50081-1 Class B
EN 50082-2 Electrostatic discharge IEC 1000-4-2
Radiated field IEC 1000-4-3
Fast transients IEC 1000-4-4
Magnetic field at 50/60 Hz IEC 1000-4-8
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]