Aeotec GP-AEOMPSEU User manual

Aeotec Multipurpose Sensor user guide
Modified on: Tue, 24 Nov, 2020 at 2:41 AM
Aeotec Multipurpose Sensor was developed to detect open/close of door/windows, temperature, and
vibration while it is connected to Aeotec Smart Home Hub. It is powered by Aeotec Zigbee technology.
Aeotec Multipurpose Sensor must be used with a compatible ZigBee Gateway, like Aeotec Smart
Home Hub, in order to work.

Familiarize yourself with Aeotec Multipurpose
Sensor
Package contents:
1. Aeotec Multipurpose Sensor
2. User manual
3. Health and safety guide
4. Magnetic ball mount
5. 3M adhesive strips
6. 1x CR2032 battery
Important safety information.
•Read, keep, and follow these instructions. Heed all warnings.
•Clean only with a dry cloth.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce hear.
•Only use attachments and accessories specified by the Manufacturer.
Connect the Aeotec Multipurpose Sensor
Video link: https://youtu.be/-EY_XxvfUDU
Steps in SmartThings Connect.
1. From the Home screen, tap the Plus (+) icon and select Device.
2. Select Aeotec and then Multipurpose Sensor (IM6001-MPP).
3. Tap Start.
4. Choose a Hub for the device.
5. Choose a Room for the device and tap Next.
6. While the Hub searches:
•Pull the “Remove when Connecting” tab found in the sensor.
•Scan the code on the back of the device.
Using Aeotec Multipurpose Sensor
Aeotec Multipurpose Sensor is now a part of your Aeotec Smart Home Hub network. It will appear
as an Open/Close widget that can display open/close status or temperature sensor readings.

This section will go over how to display all information in your SmartThings Connect app.
Steps in SmartThings Connect.
1. Open SmartThings Connect
2. Scroll down to your Aeotec Multipurpose Sensor
3. Then tap Aeotec Multipurpose Sensor widget.
4. On this screen, it should display:
•Open/Close
•Temperature
You may use Open/Close and Temperature sensor in an Automation to control your Aeotec Smart
Home Hub home automation network.
How to remove Aeotec Multipurpose Sensor from
Aeotec Smart Home Hub
If your Aeotec Multipurpose Sensor is not performing as you expected, you'll likely need to reset
your Multipurpose Sensor and remove it from Aeotec Smart Home Hub to begin a fresh start.
Steps
1. From the Home screen, select Menu
2. Select More Options (3 dot icon)
3. Tap Edit
4. Tap Delete to confirm
Factory reset your Aeotec Multipurpose Sensor
Aeotec Multipurpose Sensor can be factory reset at any time if you come across any issues, or if
you need to re-pair Aeotec Multipurpose Sensor to another hub.
Video link: https://youtu.be/yT3iVHuO7Qk
Steps in SmartThings Connect.
1. Press and Hold the recessed connect button for five (5) seconds.
2. Release the button when the LED starts blinking red.
3. The LED will blink red and green while attempting to connect.
4. Use the SmartThings app and steps detailed in "Connect the Aeotec Multipurpose Sensor"
above.

Aeotec Multipurpose Sensor technical specifications
Modified on: Wed, 17 Feb, 2021 at 9:41 PM
This page lists Aeotec product technical specifications for Aeotec Multipurpose Sensor.
Name: Aeotec Multipurpose Sensor
Model number:
EU: GP-AEOMPSEU
US: GP-AEOMPSUS
AU: GP-AEOMPSAU
Hardware required: Aeotec Smart Home Hub
Software required: SmartThings Connect (iOS or Android)
Radio protocol: Zigbee3
Power supply: No
Battery charger input: No
Battery type: 1 * CR2450
Radio frequency: 2.4 GHz
Sensor:
Open/Close
Temperature
Vibration
Indoor/Outdoor use: Indoor only
Operating distance:
50 - 100 ft
15.2 - 40 m
Dimension of Button:
1.72 x 2.04 x 0.54 in
43,8 x 51,9 x 13,7 mm
Weight:
39 g
1.44 oz