AES global Praetorian Guard Assembly Instructions

1 | P a g e
Installation & User Instructions
Praetorian Guard IP Intercom
(with 4G access Point)
PROFESSIONAL INSTALL ONLY
Manual Version 1.1
Tip: Site Survey BEFORE you begin.
See page 4

2 | P a g e
Index
Section
Pages
PHASE 1 –SITE SURVEY
3-4
Site Survey (4G Router)
4
PHASE 2 –PRODUCT OVERVIEW
5-23
Overview of Call Points
6-9
Overview of Optional Extra Devices
10
More Detail….
11-17
PCB Module Overview
18-19
Technical Specifications
20-23
PHASE 3 –SETUP 4G
24-45
PHASE 3a –SETUP 4G (Router Separate)
25-29
PHASE 3b –SETUP 4G (Router Integrated)
30-35
PHASE 3 –SETUP 4G (Continued)
36-45
4G Setup Intercom on App
37-41
Time Sync & Testing
42-43
Answering on Android
44
Answering on iOS (Apple)
45
PHASE 4 - INSTALLATION
46-55
How to Achieve & Maintain IP55 Rating
47
Power & Antenna
48
Solar Power
49
Wiring Example
50
Connecting Slave Devices
51
Adding Additional APP Users
52
Sound, Volumes and Speech / Intercom & Device Sound Options
53
Using Keypad Codes
54
PHASE 5 –ADVANCED SETUP
55-71
Feature Shortcuts & Settings Overview
56
Standard Features
57
Edit Intercom Details / Add a New Device ID
58
Ringtones of In-app Call / Check APP version
59
Check Intercom Firmware / Add, Edit or Delete Users & Logins
60
Adjust Relay Trigger Times / Adjust Intercom Time
61
Wi-Fi Settings / Adjust Maximum Monitoring Time
62
Adjust Maximum Talking Time / Adjust Maximum Calling Time
63
Reboot Intercom / Simplex / Duplex Audio Selection
64
Advanced Feature Overview / Notifications
65
Auto Relay Times / Camera Stream Resolution
66
Activity Log
67
Keypad Codes
68
PROX Cards/Tag IDs
69
Voicemail Option for missed Callers / Motion Detection Option
70
Troubleshooting
71-72
App Updates / Firmware Updates / Extra Resources
73
Intercom Maintenance / Environmental Information / Ingress
74
Warranty
75
Regulatory Compliance / Declaration of Conformity
76

3 | P a g e
PHASE 1
Site Survey

4 | P a g e
Mbs
Slow Fast
Site Survey (4G Router)
YES!
I have 4G signal at the gate with my phone! If
not, STOP. You will need some! Try a different
network provider.
Upload Speed
I have at least 1.5 Mb UPLOAD speed. If not
STOP! This system may operate intermittently
remotely or have delayed PUSH notifications.
The Praetorian Guard is specially designed to transmit the video and audio stream using on
average 400 KBit/sec (peaking to 1Mbps). This loosely translates to requiring a minimum of
1.5mbps UPLOAD speed on the network that the intercom is connected to. The higher the
upload speed the better quality of image up to approx. 4mbps.
If you have a good GSM signal for the network being used you can expect to have an upload
speed of up to 10mbps.
Note: When using our 4G access point the upload speed will be influenced by the GSM signal
being received. With a high signal level the access point can pull approx. 10mbps upload.

5 | P a g e
PHASE 2
Product Overview

6 | P a g e
Overview of Call Points(Modular Design)
Separate 4G Router
Overview of Call Points(Modular Design)
Integrated 4G Router
PRAE-4GXX-MOD
PRAE-4GXX-MOD-KP
PRAE-4GXX-MOD-PX
PRAE-4GXX-MOD-PX-KP
PRAE-4GXX-MOD-ROUTER
PRAE-4GXX-MOD-KP-ROUTER
PRAE-4GXX-MOD-PX-ROUTER
PRAE-4GXX-MOD-PX-KP-ROUTER

7 | P a g e
Overview of Call Points(Architecture Design)
Separate 4G Router
PRAE-4GXX-AB
PRAE-4GXX-AS
PRAE-4GXX-ABK
PRAE-4GXX-ASK
PRAE-4GXX-PX-ABK
PRAE-4GXX-PX-ASK

8 | P a g e
Overview of Call Points(Portrait Flush Design)
Separate 4G Router
PRAE-4GXX-FB
PRAE-4GXX/FS
PRAE-4GXX/FBK
PRAE-4GXX/FSK
PRAE-4GXX-F-PX-ABK
PRAE-4GXX-F-PX-ASK

9 | P a g e
Overview of Call Points (Pedestal Design)
Integrated 4G Router & Antenna
Overview of Call Points (Pedestal Flush Design)
Integrated 4G Router
PRAE-4GXX-PED
PRAE-4GXX-KP-PED
PRAE-4GXX-PX-PED
PRAE-4GXX-PX-KP-PED
PRAE-4GXX-PED-F
PRAE-4GXX-PED-F-KP

10 | P a g e
Overview of Optional Extra Devices
MON-11
POWER CONDITIONING MODULE
TBC (future addition late 2021)
TBC (future addition late 2021)

11 | P a g e
More Detail….
Architectural Model (4G Router Separate)
Microphone
Optional
illuminated
keypad.
Security
screw access
Colour camera with
night vision and IR
cut filter
Waterproof
Mylar 1.5W
speaker
Illuminated IP67
push button
Optional PROX
reader
Security
screw
access
Mounting
Holes

12 | P a g e
Modular Version (4G Router Separate)
Microphone
Optional
illuminated
keypad.
Security
screw access
Colour camera with night
vision and IR cut filter
Infra-red night
vision illuminators
Waterproof
Mylar 1.5W
speaker
Illuminated IP67
push button
Security
screw
access
Mounting
Holes

13 | P a g e
Portrait Version (4G Router Integrated)
Pedestal Version (4G Router Integrated)
Microphone
Optional
Keypad
Cam Security
Lock
Camera
Night vision LEDS
(short range, up to
5 feet)
Speaker Module
Call Button
4G Antenna
(selected models only)
Microphone
4G Router
Blanking Plate
Security
screw access
Colour camera with night
vision and IR cut filter
Infra-red night
vision illuminators
Waterproof
Mylar 1.5W
speaker
Illuminated IP67
push button
Optional
illuminated
keypad.

14 | P a g e
Now let’s have a look inside...
Architectural Version (4G Router Separate)
The 4G router and the main intercom module need connected together via a LAN cable and both
powered with the supplied power supplies. An active 4G SIM and GSM antenna need to be used.
12-24v
IN
SLAVE IN
1 2 3
12-24v
OUT
SLAVE OUT
1 2 3
IN
12-24v
IN
1 2 3
OUT
1 2 3
OUT
+12v-
SLAVEIN
12-24v
IN 123
SLAVEOUT
12-24v
OUT 1 2 3
Optional Keypad
& PROX module
Mounting holes
Cable entry hole
Main intercom
module
Call button
Camera module
101
50V
RVT
16V
VT
220
Mounting
holes
4G Router
PCB

15 | P a g e
Modular Version (4G Router Separate)
The 4G router and the main intercom module need connected together via a LAN cable and both
powered with the supplied power supplies. An active 4G SIM and GSM antenna need to be used.
101
50V
RVT
16V
VT
220
Mounting
holes
4G Router
PCB
12-24v
IN
SLAVE IN
1 2 3
12-24v
OUT
SLAVE OUT
1 2 3
IN
12-24v
IN
1 2 3
OUT
1 2 3
OUT
+12v-
SLAVEIN
12-24v
IN 123
SLAVEOUT
12-24v
OUT 1 2 3
Optional Keypad
& PROX module
Mounting holes
Cable entry hole
Praetorian IP
Module
Call button
Camera module

16 | P a g e
Modular Version (4G Router Integrated)
All components purchased will be pre-connected from factory. Only requiring power to be
connected with an active 4G SIM and GSM antenna.
101101
50V
RVT
16V
VT
220
12-24v
IN
SLAVE IN
1 2 3
12-24v
OUT
SLAVE OUT
1 2 3
IN
12-24v
IN
1 2 3
OUT
1 2 3
OUT
+12v-
SLAVEIN
12-24v
IN 123
SLAVEOUT
12-24v
OUT 1 2 3
Optional Keypad
& PROX module
Mounting holes
Cable entry hole
Praetorian IP
Module
Call button
Camera module
4G Modem
Module

17 | P a g e
Pedestal Version (4G Router Integrated)
All components purchased will be pre-connected from factory. Only requiring power to be
connected with an active 4G SIM.
101101
50V
RVT
16V
VT
220
12-24v
IN
SLAVE IN
1 2 3
12-24v
OUT
SLAVE OUT
1 2 3
IN
12-24v
IN
1 2 3
OUT
1 2 3
OUT
+12v-
SLAVEI N
12-24v
IN 123
SLAVEOUT
12-24v
OUT 1 2 3
Pedestal
mounting holes
IP PCB
Camera
module
Optional keypad
module
Call button
4G Router PCB
(see supplement
guide for setup
details)

18 | P a g e
Main WIFI Module in Detail…
Keypad & PROX Module’s in Detail
*optional extra
RJ45 Socket
Hard Reset
Button
Antenna SMA Connector
Micro SD
Card Slot
Volume ‘POT’
Keypad Data Cable
Connections
Push Button, Mic &
Speaker Connections
24V DC
Input
Voltage Outputs
Direct LAN cable
Connection
Intercom ID
LED Indicators
RED = Network Connection
BLUE = Power
Direct Hotspot Button
Relay 1
N/O–COM–N/C
Push to
exit input
(EG/COM)
Relay 1
N/O–COM–N/C
12-24v
IN
SLAVE IN
1 2 3
12-24v
OUT
SLAVE OUT
1 2 3
Baud Rate
Jumper Link
Slave IN
Connections
DATA
Transfer IN
DC
Voltage In
Slave OUT
Connections
IN
12-24v
IN
1 2 3
OUT
1 2 3
OUT
+12v-
SLAVE IN
12-24v
IN 123
SLAVE OUT
12-24v
OUT 1 2 3
DC Voltage
Out
DC Voltage
In
DATA Transfer
IN
DATA Transfer
OUT
Slave IN
Connections
Slave OUT
Connections

19 | P a g e
Overview of 4G Router PCB
101
50V
RVT
16V
VT
220
GSM 4G
Antenna
24v DC INPUT
LAN
1
LAN
2A
PCB boot status
LEDs
LAN 2B
Pre-connected LAN
cable to WIFI PCB
LAN Socket.
LAN1 –Only required if APN needs
changed to match the SIM being used.
LAN port
activity LEDs
GSM Signal
Level LEDs
This module will come with the APN pre-set for the VODAFONE SIM that is provided with
the unit.
Once the SIM has been setup with a data package then this module will provide an
internet connection for the main PCB
Please contact support if you need assistance programming a different APN for another
network And you will need to have ready the APN of the SIM card you activate before
programming can be done.
Be aware a laptop with RJ45 connection on site will be required to complete this
process.
PCB BOOT STATUS LED’s
When the PCB has successfully booted up you should have activity on all 3 LEDs:
RED: Constant ON = PCB Powered ON |Constant OFF = PCB Powered OFF
GREEN: Steady Flash = Connected to Network|Constant OFF = Not Connected
BLUE: Steady Flash = Standby Mode |Constant OFF = Booting / OFF
LAN PORT ACTIVITY LED’s
The 2 LEDs behind LAN 1 Port will flash GREEN when you have connection activity.
LAN PORT ACTIVITY LED’s
The 2 LEDs behind LAN 1 Port will flash GREEN when you have connection activity.

20 | P a g e
Technical Specifications
GENERAL
Front Panel
Portrait Orientation
AB/ABK = 3mm Acrylic on Architectural Design Marine Grade Stainless
Steel BS316 Front Plate
AS/ASK = 3mm Marine Grade Stainless Steel BS316 on Architectural
Design Marine Grade Stainless Steel BS316 Front Plate
FS/FSK = Flush Design Marine Grade Stainless Steel BS316 Front Plate
IMP/IMPK = 3mm Acrylic on Imperial Design Marine Grade Stainless
Steel BS316 Front Plate
Modular = Powder Coated Marine Grade Stainless Steel BS316 Front
Plates with 3mm Acrylic on Design Marine Grade Stainless Steel BS316
Modular Plates
Landscape Orientation
PED = Pedestal Surface Mount
Hood Cover
(MOD, IMP(K), PED ver)
Powder coated Aluminium
Mounting Housing
(Backbox)
Marine Grade Stainless Steel BS316
Call Button
Stainless-steel button with illuminated LED Ring
Weatherproof
IP55
Approvals
CE, FCC
Dimensions
See Datasheets
Operating Temp.
-25 to +55°C / -13 to 131°F
Power Supply
24V DC
Power Consumption
IP PCB w/Keypad & Prox
Standby = 96mA
Operating = 500mA
Peak = 2000mA
Solar Power
30Watt Solar Panel (minimum)
24V 10AH