aFe Power SCORCHER GT 77-47004 User manual

advanced DW enge
Instruction Manual PIN: 77-47004

 
 S  g 



*International
Vehicle


 8 
Engine:L4-2.0L (t)
Engine:L4-2.0L (t)
Engine:L4-2.0L (t)

Attention:
aFe POWER strongly recommends upgrading the factory spark plugs to high performance spark plugs to
maintain a stronger, more consistent spark and prevent any damage to your engine. During our testing we
used HKS M45XL spark plugs and recommend those spark plugs or equivalent. Alternatively, the factory
spark plug gap can be closed to 0.026” or smaller. The use of 91 or higher octane is also highly
recommended.

A
D
B
Page3 

REMOL
 
Figure A
Refer to Figure A for Step 1.
  




Page4

Refer to Figure B for Steps 2-3.
Step 2: Remove the (2) push clips securing the air scoop and loosen the clamp securing the intake tube
to the airbox.
Step 3: Remove the (3) 10mm bolts securing the airbox, then pull the airbox out of the vehicle.
Page5

Refer to Figures C for Step 4.
  
 
Page6

Refer to Figure D for Steps 5-6.
 

 


Page? aFepowecom

Refer to Figure E for Step 7.
Step 7: Check with the pictures to make sure the connectors are correctly connected.
 

Pages

Refer to Figure F for Steps 8-9.
 

 


Page9

Refer to Figure G for Step 10.
Step 10: Check with the pictures to make sure the connectors are correctly connected.


Page 10