aFe Power MOMENTUM GT 50-70034S User manual

®
advanced FLOW engineering Momentum GT Dynamic Air Scoop
Instruction Manual P/N: 50-70034S
Make: Nissan Model: Titan XD Year: 2017-2020 Engine: V8-5.6L

®
Label Qty. Description Part Number
A 1 Scoop 05-5070034B3
Installation will require the following tools:
Flat head screwdriver, 10mm & 13mm sockets and socket wrench.
Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in
California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Please read the entire instruction manual before proceeding.
• Ensure all components listed are present.
• If you are missing any of the components, call customer support at 951-493-7185.
• Ensure you have all necessary tools before proceeding.
• Do not attempt to work on your vehicle when the engine is hot.
Page 2
Retain factory parts for future use.

aFepower.com
Page 3
A

®
Refer to Figure A for Steps 1-2
Step 1: Remove the plug on the housing, if installed 1 .
Step 2: Remove the two (2x) factory bolts using socket and wrench 2 .
REMOVAL
Page 4
1
2
2
Figure A

Refer to Figure B for Steps 3-5
Step 3: Push the aFe POWER scoop into the aFe POWER housing’s round opening 3 .
Step 4: Secure the aFe POWER scoop with the two (2x) factory bolts removed in Step 2. It may help to
install the inside bolt first 4 .
Step 5: Verify the scoop is secured. Your installation is now complete. Thank you for choosing aFe
POWER!
NOTE: Check all bolts, clamps, and connectors after 100-200 miles.
aFepower.com
Page 5
3
4
INSTALL
Figure B