6
1
2
3
Install the batteries*
• Remove the cover to the battery
compartment at the bottom of
the device.
• Insert four (4) alkaline batteries with
flat end of battery (-) going against the
spring.
• Replace the cover.
* Make sure to only use good quality brand lithium
or alkaline batteries in your ageLOC Me device.
DEVICE SETUP
Select language
• If the device is o, turn it on by tapping the
Menu button ( ).
• Use the arrow buttons ( ) to select your
preferred language.
• Press the Select button ( ) to confirm
your selection.
NOTE: The default language is English. You may
change your language selection at any time from
the Settings menu.
Set current time
• Use the arrow buttons ( ) to choose
the 12 or 24-hour clock format.
• Press the Select button ( ) to confirm
your selection.
• If you select the 12-hour format, choose
a.m. or p.m.
• Adjust the hour using the left arrow ( )
to go down and the right arrow ( ) to go
up, then press Select ( ).
• Adjust the minutes using the left arrow
( ) to go down and the right arrow ( )
to go up, then press Select ( ).
NOTE: It is important that you set your current
time to enable the ageLOC Me device to deliver
the proper day or night regimen.
page 6
Hold select button for 3 secs to turn on ageloc logo appears for 3 secs select language appears for 3 secs language scrolled through : and language flashes to highlight item selected
select button pressed to select
year scrolled through : and
set date appears for 3 secs month scrolled through : and
year selected through : month selected through :
am selected through :
day confirmed through : select language appears for 3 secs
day scrolled through : and am or pm highlighted through: and
hour selected through :
hour scrolled through : and
...or pm selected through : time confirmed through :minutes scrolled through : and
setup complete appears for 3 secs
1. Standby 2. Loading screen 3. Set language 4. Scroll languages 5. Select language
6. Set date 7. Scroll year 8. Select year 9. Scroll month 10. Select month
11. Scroll day 12. Select day 13. Set time 14. Scroll am or pm 15. Select am
16. ...or pm
21. Setup complete
17. Scroll hour 18. Select hour 19. Scroll minutes 20. Select minutes
Setup
page 6
Hold select button for 3 secs to turn on ageloc logo appears for 3 secs select language appears for 3 secs language scrolled through : and language flashes to highlight item selected
select button pressed to select
year scrolled through : and
set date appears for 3 secs month scrolled through : and
year selected through : month selected through :
am selected through :
day confirmed through : select language appears for 3 secs
day scrolled through : and am or pm highlighted through: and
hour selected through :
hour scrolled through : and
...or pm selected through : time confirmed through :minutes scrolled through : and
setup complete appears for 3 secs
1. Standby 2. Loading screen 3. Set language 4. Scroll languages 5. Select language
6. Set date 7. Scroll year 8. Select year 9. Scroll month 10. Select month
11. Scroll day 12. Select day 13. Set time 14. Scroll am or pm 15. Select am
16. ...or pm
21. Setup complete
17. Scroll hour 18. Select hour 19. Scroll minutes 20. Select minutes
Setup
