ageLOC LumiSpa User manual

USER’S MANUAL

2
SAFETY INSTRUCTIONS
ageLOC® LumiSpa™was designed for use by competent adults. It can be used by
children aged 8 years old and above and persons with reduced physical, sensory, or
mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning its use in a safe way and understand the hazards
involved. ageLOC LumiSpa is not a toy and children should not play with it. Cleaning
and user maintenance should not be performed by children.
WARNING
The detachable power supply must be placed where it cannot fall into water.
For the purposes of recharging the battery, only use the power supply unit provided
with this device.
PRECAUTIONS
USAGE
• Do not use harsh chemicals or abrasives on your ageLOC LumiSpa device.
• Keep out of reach of children.
• Do not use device if treatment head is damaged
• Only use device as directed and do not apply excessive product to the
treatment head.
• Only use device for standard treatment times and do not use for an
excessive period.
• Do not use for an excessive period on one area of the skin.
• Only use device as directed and do not apply to compromised skin.
• Do not use on raised moles or compromised skin.
• Do not conduct treatment more frequently than recommended.
• Do not expose charging base to water.
• Do not use device if it is damaged.
• Do not use power cord in a wet environment.
• Do not use power cord if it becomes wet.
• Do not handle charging base with wet hands.
• Regularly clean handgrip.
• Do not share treatment heads.

3
TEMPERATURE
Never place your device near or over a radiator, heat register, or any other heat source.
Avoid leaving your device in an overly hot or cold environment for prolonged periods
of time. The storage temperature range for the device is between -10° cand 50° c
(14° fand 122° f).
ELECTROMAGNETIC COMPATIBILITY
Conforms to the requirements of the 2004/108/CE directive on electromagnetic
compatibility.
For United States Users: The ageLOC® LumiSpa™device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) the device may not
cause harmful interference, and (2) the device must accept any interference received,
including interference that may cause undesired operation.
SERVICING
Do not attempt to repair your device yourself. This will void any warranty. There are no
user-serviceable parts inside. Please see warranty section for service.

4
TABLE OF CONTENTS
System Components 5
Treatment Heads and Treatment Cleanser Options 6
Charging Your ageLOC® LumiSpa™Device 7
Attaching and Removing Your Treatment Head 8
Using Your ageLOC LumiSpa Device 9
Cleaning and Caring for Your ageLOC LumiSpa Device 10
Tips 10
Replacement and Warranty Information 11

5
NOTE: Illustrations do not reflect actual size.
*There are three ageLOC LumiSpa treatment cleanser options available.
*
SYSTEM COMPONENTS
ageLOC LumiSpa Treatment Cleanser—Dry
works exclusively with the ageLOC LumiSpa
device to cleanse and treat the skin for a
healthy, smooth, and glowing appearance.
USAGE: Moisten face with warm water and
apply ample treament cleanser evenly over
face, avoiding eye area. Use with ageLOC
LumiSpa device as directed in ageLOC
LumiSpa User’s Manual.
INGREDIENTS: Water (Aqua), Dicaprylyl
Carbonate, Diisostearyl Malate, Tribehenin
PEG-20 Esters, Glycerin, Glycereth-26,
Squalane, Cetearyl Alcohol, Dimethicone,
Caprylic/Capric/Myristic/Stearic Triglyceride,
Sodium Astrocaryum Murumuruate, Oryza
Sativa (Rice) Extract, Schizandra Chinensis
Fruit Extract, Coenochloris Signiensis Extract,
Narcissus Tazetta Bulb Extract, Acrylates/
C10-30 Alkyl Acrylate Crosspolymer,
Niacinamide, Urea, Methylsilanol Hydroxypro-
line Aspartate, PEG-40 Hydrogenated Castor
Oil, Sodium Lactate, Sodium PCA, Vegetable
Oil, Xanthan Gum, Batyl Alcohol, Butylene
Glycol, Pentylene Glycol, Phytosteryl/
Octyldodecyl Lauroyl Glutamate, Maltodex-
trin, Brassicamidopropyl Dimethylamine,
Hydroxyphenyl Propamidobenzoic Acid,
Salicyloyl Phytosphingosine, Fructose,
Glycine, Inositol, Lactic Acid, Lecithin,
Phenoxyethanol, Hydroxyacetophenone,
Disodium EDTA, Sodium Hydroxide,
Fragrance (Parfum).
SAFETY-ALLERGY-DERMATOLOGIST TESTED
SOLD E XCLUSIVELY BY NU SK IN ENTERP RISES
AUTHORIZED DISTRIBUTORS
MANU FACTURED IN THE U.S. A. EXCLUSIVELY FOR
NSE PRO DUCTS, INC., PROVO, UT, 84601
©2017NSE PRODUCTS, INC. NUS KIN.COM
QUALIT Y
?? ?????? ????????/1
ACTIVATING CLEANSER
100 ml ℮(3.4 fl. oz.)
Treatment Head
ageLOC LumiSpa
Handset
On/O Button
Charging Base
Power Cord

6
TREATMENT HEADS AND TREATMENT CLEANSER
OPTIONS
ageLOC® LumiSpa™oers a selection of treatment heads and treatment
cleansers, so you can find the best combination for your skin.
Treatment Heads
Each ageLOC LumiSpa treatment head features a gentle, nonabrasive silicone
face that is embedded with silver particles. There are two treatment head options
available: Normal and Firm.
Normal Firm
Treatment Cleanser Options
The ageLOC LumiSpa treatment cleansers are designed to be compatible with the
ageLOC LumiSpa device. There are three ageLOC LumiSpa treatment cleanser
options, which are based on skin type and personal preference.
ageLOC LumiSpa Treatment Cleanser—Dry
ageLOC LumiSpa Treatment Cleanser—Normal/Combo
ageLOC LumiSpa Treatment Cleanser—Oily

7
CHARGING YOUR AGELOC® LUMISPA™ DEVICE
1• Prior to placing your ageLOC LumiSpa
device in the charging base, make sure
your device is completely dry.
• Plug the charging base into an outlet and
charge your device overnight. When used
as recommended, the fully charged device
will last at least a week.
• When you place your device in the
charging base, the lights on the ageLOC
LumiSpa handset will radiate for a short
time and the On/O button will remain lit.
Then, the On/O button will pulse slowly,
indicating the device is charging
• The On/O button will remain lit when the
device is fully charged.
WARNING: Rechargeable batteries, like
those used in ageLOC LumiSpa, need to
carry a minimal charge in order to function
properly. If the battery is allowed to fully
discharge and then is not charged for an
extended period of time, it may adversely
impact the battery’s ability to be charged. For
optimal battery life, we recommend charging
your device whenever low battery is indicated
and to avoid storing the device unused for
months at a time.

8
ATTACHING AND REMOVING
YOUR TREATMENT HEAD
1
2
Attaching your ageLOC® LumiSpa™
treatment head
• Grip the sides of the treatment head.
• Align the hole on the back of the
treatment surface with the black rotating
axle on the LumiSpa handset.
• Gently press the head onto the axle until
it clicks.
Removing your ageLOC LumiSpa
treatment head
• Grip the sides of the treatment head.
• Gently lift the top of the treatment head
and pull until it releases.

9
1
2 3
4
USING YOUR AGELOC® LUMISPA™
ageLOC LumiSpa is a twice daily regimen. Use it morning and night for best results.
STEP 
• Moisten face with water.
• Apply ageLOC LumiSpa treatment cleanser to
all areas of the face.
STEP 
• Wet treatment head by placing it under running
water. Then turn on device by pressing the On/O
button.
• Each of the four lights around the center button
will flash once and the treatment head will
immediately begin to counter-oscillate, first
slowly, then up to normal speed.
• Slowly glide the treatment head back and
forth over one of the areas of your face using
broad strokes. Do not scrub or move across
the face quicky.
• The device will do three brief stops every 30
seconds to prompt you to move from one area
of the face to the next.
NOTE: If at any time you would like to pause your treatment, press the On/O
button once. To turn o the device, press and hold the On/O button down for
two seconds.
Warning #1: If you press the device too firmly onto your skin, the counter-oscillating
motion will stop and the device will vibrate once slowly. Lift the device slightly to
resume treatment.
Warning #2: If you scrub your face too aggressively with the device, the counter-
oscillating motion will stop and the device will vibrate quickly several times. Glide
the device across your face using slow, broad strokes to resume treatment.
NOTE: ageLOC LumiSpa is safe to use in the shower or wet environment.
However, the charging base should not be exposed to water.
NOTE: ageLOC LumiSpa is suitable for makeup removal. However, do not use
the device around the eye area.

10
STEP 
• When the treatment is done, the device will stop.
• The device will turn o automatically.
• Rinse your face with water to remove residual
treatment cleanser.
CLEANING AND CARING FOR YOUR
AGELOC® LUMISPA™ DEVICE
AFTER EVERY TREATMENT:
• Remove the treatment head from the device. Rinse it
with water while rubbing to remove residual treatment
cleanser. Dry thoroughly.
• Rinse device under water.
• Wipe device dry with washcloth.
• Only reattach the treatment head to the device after
both components are thoroughly dry.
•Set device in charging base when it is completely dry.
TIPS
• To ensure optimal performance, replace your treatment
head every three months.