ageLOC LumiSpa User manual

USER’S MANUAL
®

SAFETY INSTRUCTIONS
ageLOC® LumiSpa®was designed for use by competent adults. It can be used by
children aged 8 years old and above and persons with reduced physical, sensory, or
mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning its use in a safe way and understand the hazards
involved. ageLOC LumiSpa is not a toy and children should not play with it. Cleaning
and user maintenance should not be performed by children.
WARNING
The detachable power supply must be placed where it cannot fall into water. For
the purposes of recharging the battery, only use the power supply unit provided
with this device.
Do not use the plug-in detachable power supply in a wet environment.
PRECAUTIONS
USAGE
• Do not use harsh chemicals or abrasives on your ageLOC LumiSpa device.
• Keep out of reach of children.
• Do not use device if treatment head is damaged
• Only use device as directed and do not apply excessive product to the
treatment head.
• Only use device for standard treatment times and do not use for an
excessive period.
• Do not use for an excessive period on one area of the skin.
• Only use device as directed and do not apply to compromised skin.
• Do not use on raised moles or compromised skin.
• Do not conduct treatment more frequently than recommended.
• Do not expose charging base to water.
• Do not use device if it is damaged.
• Do not use power cord in a wet environment.
• Do not use power cord if it becomes wet.
• Do not handle charging base with wet hands.
• Regularly clean handgrip.
• Do not share treatment heads.
2

TEMPERATURE
Never place your device near or over a radiator, heat register, or any other heat
source. Avoid leaving your device in an overly hot or cold environment for prolonged
periods of time. The storage temperature range for the device is between ° c
and ° c(° fand ° f). For optimal battery life, avoiding temperatures above
° C (° F).
ELECTROMAGNETIC COMPATIBILITY
Conforms to the requirements of the //CE directive on electromagnetic
compatibility.
For United States Users: The ageLOC® LumiSpa®device complies with Part 15 of
the FCC Rules. Operation is subject to the following two conditions: (1) the device
may not cause harmful interference, and (2) the device must accept any interference
received, including interference that may cause undesired operation.
SERVICING
Do not attempt to repair your device yourself. This will void any warranty. There are
no user-serviceable parts inside. Please see warranty section for service.
3

TABLE OF CONTENTS
System Components 5
Treatment Heads and Treatment Cleanser Options 6
Charging Your ageLOC® LumiSpa®Device 7
Attaching and Removing Your Treatment Head 8
Using Your ageLOC LumiSpa Device 9
Cleaning and Caring for Your ageLOC LumiSpa Device 10
ageLOC LumiSpa Accent Usage 11
Attaching Your ageLOC LumiSpa Accent Treatment Head 11
Using Your ageLOC LumiSpa Accent 11
Cleaning and Caring for Your ageLOC LumiSpa Accent 12
Troubleshooting 13
Device Disposal 13
Replacement and Warranty Information 13
Patents 13
4

SYSTEM COMPONENTS
®
ageLOC® LumiSpa™TreatmentCleanser—
Sensitive works e xclusively with the
ageLOC LumiSpa device to cle anse and
treat the skin for a heal thy,smo oth, and
glowing appearance.
USAGE: Moisten face with war m water and
apply ample treament cleanser evenly
over face, avoiding eye area. Us e with
ageLOC LumiSpa device as dir ected in
ageLOC LumiSpa User’s Manual.
INGREDIENTS:Water (Aq ua),Ce tearyl
Alcohol, Glycerin, PEG -8 Dimethicone,
Cocamidopropyl Betaine, Caprylyl/Capryl
Glucoside, Capryl/Capramidopropyl
Betaine, Carbom er,Na rcissus Tazetta Bulb
Extract, Pinus Tabulaeformis Bark Extract,
Schizandra Chine nsis Fruit Extract, Avena
Sativa (Oat) Kernel Ex tract, Oryz a Sativa
(Rice) Extract , Allantoin, Zingiber
Ocinale (Ginger) Ro ot Extract, Bisab olol,
Carnosine, Xanthan Gum, Hydroxyace-
tophenone, Phenoxyethanol, Disodium
EDTA,So dium Hydroxide, Sodium
Chloride, Citric Acid.
SAFETY-ALLERGY-DERMATOLOGIST
TESTED
SOLD EXCLUSIV ELYBY N U SKIN ENTER PRISES
AUTHORIZEDDISTRIBUTORS
MANUFACTUR ED IN THE U.S.A . EXCLUSIVELY FOR
NSE PRODUCTS, INC., PROVO, UT, 84601
©2017NSEPRODUCTS, INC. NUSKIN.COM
QUALITYQUALITY
?? ?????? ????????/1
TREATMENT CLEANSER
sensitive
100 ml ℮(1 fl. oz.)
5
NOTE: Illustrations do not reflect actual size.
Treatment Head
ageLOC® LumiSpa®
Handset
On/O Button
Charging Base
Plug-In Detachable
Power Cord

TREATMENT HEADS AND TREATMENT CLEANSER
OPTIONS
ageLOC® LumiSpa®oers a choice of treatment heads and a selection of treatment
cleansers, so you can find the best combination for your skin.
Treatment Heads
Each ageLOC LumiSpa treatment head features a gentle, nonabrasive silicone face
that is embedded with silver particles. There are three treatment head options available:
Normal, Firm, and Gentle.
Normal Firm Gentle
Treatment Cleanser Options
ageLOC LumiSpa treatment cleansers were developed to be compatible with the
ageLOC LumiSpa device and to treat specific skin types. ageLOC LumiSpa treatment
cleansers should be chosen by personal preference and/or by skin type.
Additional Options
ageLOC LumiSpa Accent—this soft treatment tip gently exfoliates the skin, while
deeply stimulating the delicate area around the eyes. Paired with ageLOC
LumiSpa IdealEyes, Accent delivers an invigorating treatment for an instant burst
of hydration, firming power, and wide-awake brightness. Massage away undereye
bags, puness, and dark circles. Use Accent twice daily for a refreshed, well-rest-
ed look. All eyes on you, baby!
Caution: ageLOC LumiSpa products have been carefully designed to work
exclusively with the device and treatment heads. Using other products with
ageLOC LumiSpa may result in unforeseen damages to the device and/or
treatment heads.
6

1
CHARGING YOUR AGELOC® LUMISPA® DEVICE
• Prior to placing your ageLOC LumiSpa
device in the charging base, make sure
your device is completely dry.
• Plug the detachable power cord into the
charging base. Plug the detachable power
supply into an outlet and charge your device
overnight. When used as recommended,
the fully charged device will last at least a
week. Do not use the plug-in detachable
power supply in a wet environment.
• When you place your device in the charging
base, the lights on the ageLOC LumiSpa
handset will radiate for a short time and the
On/O button will remain lit. Then, the
On/O button will pulse slowly, indicating
the device is charging.
• The On/O button will remain lit when
the device is fully charged.
7
NOTE: The lights on the front of the handset indicate battery
power. An amber light filling only the bottom third of the
handset signifies a low battery.
WARNING: Rechargeable batteries, like those used
in ageLOC LumiSpa, need to carry a minimal charge in
order to function properly. If the battery is allowed to
fully discharge and then is not charged for an extended
period of time, it may adversely impact the battery’s
ability to be charged. For optimal battery life, we recommend
charging your device whenever low battery is indicated and
to avoid storing the device unused for months at a time.

ATTACHING AND REMOVING
YOUR TREATMENT HEAD
1
2
Attaching your ageLOC® LumiSpa®
treatment head
• Grip the sides of the treatment head.
• Align the hole on the back of the
treatment surface with the black rotating
axle on the LumiSpa handset.
• Gently press the head onto the axle until
it clicks.
Removing your ageLOC LumiSpa
treatment head
• Grip the sides of the treatment head.
• Gently lift the top of the treatment head
and pull until it releases.
NOTE: Replace your treatment surface
every three months to ensure your skin
receives the optimal benefits.
8

USING YOUR AGELOC® LUMISPA®
ageLOC LumiSpa is a twice daily regimen. Use it morning and night for best results.
STEP 1
• Moisten face with water.
• Apply ageLOC LumiSpa treatment cleanser to
all areas of the face, avoiding the eyes and lips.
STEP 2
• Wet treatment head by placing it under running
water. Then turn on the device by pressing the On/
O button.
• Each of the four lights around the center button
will flash once and the treatment head will
immediately begin to counter-rotate—first slowly
then up to normal speed.
• Gently glide the treatment head back and forth in
slow, broad strokes over one of the areas of your
face. If you use a scrubbing motion or press too
hard, the device will pause and vibrate to remind
you to apply normal pressure and resume slow,
broad strokes.
• The device will pause briefly three times (once
every 30 seconds) to prompt you to move from
one area of the face to the next.
STEP 3
• When the treatment is done, the device will stop.
•The device will turn o automatically.
• Rinse your face with water to remove residual
treatment cleanser.
9
1
2 3
4

NOTES:
• If at any time you would like to pause your treatment, press the On/O button
once. To turn o the device, press and hold the On/O button for two seconds.
• ageLOC LumiSpa is safe to use in the shower or wet environment. However, the
charging base should not be exposed to water.
• ageLOC LumiSpa is suitable for makeup removal. However, do not use the
device around the eye area.
CLEANING AND CARING FOR YOUR
AGELOC® LUMISPA® DEVICE
AFTER EVERY TREATMENT:
• Remove the treatment head from the device. Rinse it
with water while rubbing to remove residual treatment
cleanser. Dry thoroughly.
• Rinse device under water.
• Wipe device dry with washcloth.
• Only reattach the treatment head to the device after
both components are thoroughly dry.
•Set device in charging base when it is completely dry.
10