Agrimate Amh 200 User manual

User Manual

BEFORE OPERATING THIS MACHINE,

PLEASE READ THESE INSTRUCTIONS CAREFULLY

AMH 200 PRO

Brush Cutter / Power Weeder

DISCLAIMER: DUE TO CONSTANT UPGRADATION, FEATURES AND SPECIFICATIONS ARE

SUBJECT TO CHANGE WITHOUT NOTICE

SAFETY OPERATION

DISCRIPTION OF SYMBOLS

This symbol, the industry’s “safety alert

symbol”, is used throughout this manual &

on labels on the machine itself to want of

the possibility of personal injury. Read these

instructions carefully. It is essential that you

read the instructions & safety regulations be-

fore you attempt to assemble or use this unit.

Read the operator’s manual carefully.

Put on goggles, hearing protection & helmet

before using.

Keep people out of the danger zone. this is

a circle of 15 meter radius around the unit &

operator.

When transporting, checking or adjusting the

unit be sure the engine is stopped.

SPARE PARTS LIST

ASSEMBLING

1 assemble engine with main pipe

 •Putengine&mainpipeundergroundthen

starting assembling

 •LocktightM6x30screwtopreventloosing.

ASSEMBLE BLADE & GEAR CASE

ASSEMBLING BLADE

ASSEMBLE SAFETY COVER

ASSEMBLE HANDLE WITH MAIN PIPE

•Insetright&lefthandlesintoHandle

jointaevenly.

•Adjusthandlejointtomostcpmfortable

position for user.

•Adjusthandletosuitableangle.

•Locktight2bolt.

Read the Operators Manual carefully. Be familiar with the controls and the proper use of the unit.

How to turn the unit off, and how to unhook the harness quickly in an emergency.

•Donotoperateunderhotorcoldweatherinalongtime.Takeenoughrest.

1. Dress.

 •DressinLongsleeveclothingandlongpants.

 •DonotWearlooseclothing

 •Weargloveswhenoperation

 •Putonhatwithbrimorhelmet.

 •Wearsafetyshoestopreventfalls

 •Weargogglestoprotecteyes

 •Putonhearingprotectiontoavoidbuzz.

SAFETY RULES & PRECAUTIONS

ENVIRONMENTAL PRECAUTIONS

• Do not operate under following situation. Drunk, Children or infants.

 Neverallowanyonetousetheunitwithoutproperinstruction.

 Undertheinuenceofalchohol,drugs,medicationsoraffectyourvision,dexterityorjudgment.

 Haveenoughrestandsleepforcontinuousoperation.

Do not operate under menses or pregnancy.

•Donotoperateduringrainyday.

SAFETY OPERATOR

STRICTLY NO FIRE

•Eliminateallsourcesofsparksofame(includingsmoking),openamesorworkthatcould

cause sparks.

•Donotsmokewhenengineisstillrunningorrefuel.

•Donotrefuelahotengine.Waituntiltheenginehascooleddown.

•Avoid spilling fuel or oil. Spirted fuel should always be wiped up.

•Moveatleastthreemetersawayfromthefuelingpointbeforestartingengine.

•Alwaysstartengineinoutdoors.

•Checkfueltanktopreventleakage

•Alwaysinstallsharpblade

•Do not install any abnormal blade

•Alwaysassemblesafetydevicesproperly.

Always cool down

before operation

CHECKS BEFORE STARTING

This is Safe

•Do not use any accessory other than those supplied by the manufacturer for use with this

particular unit

•Inspecttheentireunitbeforeusingeachtime.Especiallytightenthescrewsofbladeandclutchcase.

Use accessories supplied by

manufacturer

•Keeppeopleoutofthedangerzoneduringcranking.

•Holdtheunitdownrmlytopreventloosingcontrolwhencranking

•Makingsurethebladeisabovegroundandisnotintouchwithanythingbeforecranking

•Shutdownimmediatelyiftheunitstartstoshakeorvibrate.

•Packthebladeafterusing

•Alwayskeepbothhandonthecontrolhandles.Donotoperateone-handed.

•Donotputhandsorfeetnearorunderrotatingpartswhileengineisrunning.

•Themufersideoftheengineshouldbeawayfromyourbodytoavoidarmburns.

•Donotstoretheunitwithfuelinthetank,becauseafuelleakcouldstartare.Allowthe

engine to cool before storing.

•Beforecleaning,repairingorinspecting,makesurebladehasstopped.Disconnectandsecure

thesparkplugwireawayfromplugtopreventaccidentalstarting.

•Storeinadryareaoutofreachofchildren.

CAUTIONS DURING OPERATION

PRECAUTIONS AFTER OPERATION

Sr. No Part No. Part Name

1AMH-200-4S-PRO-TB-01 RUBBER RINGER

2AMH-200-4S-PRO-TB-02 HANDGRIP

3AMH-200-4S-PRO-TB-03 SCREW M5×25

4AMH-200-4S-PRO-TB-04 CAP,UPPER

5AMH-200-4S-PRO-TB-05 CLAMP RING

6 AMH-200-4S-PRO-TB-06 LINKER

7AMH-200-4S-PRO-TB-07 RUBBER

8AMH-200-4S-PRO-TB-08 CAP,LOWER

9AMH-200-4S-PRO-TB-09 SCREW M5X25

Sr. No Part No. Part Name

AAMH-200-4S-PRO-TA GEAR CASE ASS'Y

1AMH-200-4S-PRO-TA-01 STOP RING 28

2AMH-200-4S-PRO-TA-02 STOP RING 12

3AMH-200-4S-PRO-TA-03 BEARING

4AMH-200-4S-PRO-TA-04 BEARING

5AMH-200-4S-PRO-TA-05 PINION

6 AMH-200-4S-PRO-TA-06 SCREWM6×35

7AMH-200-4S-PRO-TA-07 SCREW M5×12

8AMH-200-4S-PRO-TA-08 SCREW M5×8

9AMH-200-4S-PRO-TA-09 SCREWM6×8

10 AMH-200-4S-PRO-TA-10 GEAR CASE

11 AMH-200-4S-PRO-TA-11 BEARING

12 AMH-200-4S-PRO-TA-12 GEAR

13 AMH-200-4S-PRO-TA-13 GEAR SHAFT

14 AMH-200-4S-PRO-TA-14 BEARING

15 AMH-200-4S-PRO-TA-15 STOP RING 35

16 AMH-200-4S-PRO-TA-16 OIL SEAL

17 AMH-200-4S-PRO-TA-17 HOLDER A

18 AMH-200-4S-PRO-TA-18 WASHER

19 AMH-200-4S-PRO-TA-19 HOLDER B

20 AMH-200-4S-PRO-TA-20 COVER

21 AMH-200-4S-PRO-TA-21 NUT

AMH-200-4S-PRO Plus-Brush Cutter-Shaft A - Diagram & Part No.

AMH-200-4S-PRO Plus-Brush Cutter-Shaft B - Diagram & Part No.

Sr.No Part No. Part Name

CAMH-200-4S-PRO-TC-01 PIPE COMP.

1AMH-200-4S-PRO-TC-02 DRIVE BEARING

2AMH-200-4S-PRO-TC-03 DRIVE SHAFT

3AMH-200-4S-PRO-TC-04 PIPE

Sr.No Part No. Part Name

DAMH-200-4S-PRO-TD-01 LEVER ASS'Y

1AMH-200-4S-PRO-TD-02 BOX,LEFT

2AMH-200-4S-PRO-TD-03 STOP BUTTON COMP.

3AMH-200-4S-PRO-TD-04 CABLE COMP.

4AMH-200-4S-PRO-TD-05 BOLTM5×30

5AMH-200-4S-PRO-TD-06 WASHER 5

6 AMH-200-4S-PRO-TD-07 BOLT ST3.5×13

7AMH-200-4S-PRO-TD-08 BOX,RIGHT

8AMH-200-4S-PRO-TD-09 HANDGRIP

9AMH-200-4S-PRO-TD-10 SPRING

10 AMH-200-4S-PRO-TD-11 HANDGRIP

Sr.No Part No. Part Name

1AMH-200-4S-PRO-TE-01 BLADE COVER

2AMH-200-4S-PRO-TE-02 BOLTM5×10

3AMH-200-4S-PRO-TE-03 GUARD ASS'Y

4AMH-200-4S-PRO-TE-04 BOLT M5×12

5AMH-200-4S-PRO-TE-05 SAFETY GUARD BRACKET

6 AMH-200-4S-PRO-TE-06 SAFETY GUARD

7AMH-200-4S-PRO-TE-07 SCREWST4.2×16

8AMH-200-4S-PRO-TE-08 GUARD ASS'Y

9AMH-200-4S-PRO-TE-09 GUARD

10 AMH-200-4S-PRO-TE-10 SCREWST4.2×16

11 AMH-200-4S-PRO-TE-11 BLADE

AMH-200-4S-PRO Plus-Brush Cutter-Shaft C - Diagram & Part No.

AMH-200-4S-PRO Plus-Brush Cutter-Shaft D - Diagram & Part No.

AMH-200-4S-PRO Plus-Brush Cutter-Shaft E - Diagram & Part No.

Sr. No Part No. Part Name

FAMH-200-4S-PRO-TF HOLDER ASSY

1AMH-200-4S-PRO-TF-01 HARNESS CLAMP

2AMH-200-4S-PRO-TF-02 CLAMP

3AMH-200-4S-PRO-TF-03 SCREWM5×20

4 NUTM5

Sr. No Part No. Part Name

GAMH-200-4S-PRO-TG BLADE

Sr. No Part No. Part Name

HAMH-200-4S-PRO-TH HARNESS ASS'Y

AMH-200-4S-PRO Plus-Brush Cutter-Shaft F - Diagram & Part No.

AMH-200-4S-PRO Plus-Brush Cutter-Shaft G - Diagram & Part No.

AMH-200-4S-PRO Plus-Brush Cutter-Shaft H - Diagram & Part No.

AMH-200-4S-PRO Plus-Brush Cutter-Shaft I - Diagram & Part No.

AMH-200-4S-PRO Plus-Brush Cutter-Shaft J - Diagram & Part No.

Sr. No Part No. Part Name

JAMH-200-4S-PRO-TJ NYLON CUTTER HEAD

1AMH-200-4S-PRO-TJ-01 Case

2AMH-200-4S-PRO-TJ-02 Spring

3AMH-200-4S-PRO-TJ-03 Cord Holder

4AMH-200-4S-PRO-TJ-04 Corddia2.5x5000

5AMH-200-4S-PRO-TJ-05 CordCover

6 AMH-200-4S-PRO-TJ-06 Cover

Sr. No Part No. Part Name

IAMH-200-4S-PRO-TI CLUCH COMP.

1AMH-200-4S-PRO-TI-01 CLUCH DRUM COMP.

2AMH-200-4S-PRO-TI-02 STOP RING 35

3AMH-200-4S-PRO-TI-03 BEARING

4AMH-200-4S-PRO-TI-04 STOP RING 15

5AMH-200-4S-PRO-TI-05 CLUCH CASE

6 AMH-200-4S-PRO-TI-06 SCREWM6×20

7AMH-200-4S-PRO-TI-07 RUBBER

8AMH-200-4S-PRO-TI-08 WASHER

9AMH-200-4S-PRO-TI-09 STOP RING 48

10 AMH-200-4S-PRO-TI-10 LINKER

11 AMH-200-4S-PRO-TI-11 HANG RING

12 AMH-200-4S-PRO-TI-12 WASHER

13 AMH-200-4S-PRO-TI-13 HANG HANDLE

14 AMH-200-4S-PRO-TI-14 BOLTM6×30

15 AMH-200-4S-PRO-TI-15 BOLT M5×12

Forsafetyuse,makesurethemachineiscleanedeverythree-months.Beforeworking,makesure

toinspectthelterandthenozzle,andensurethereisnoimpurity.Afterworking,makesurethere

is no water in the pump and the hose.

If the machine needs to be repaired in the guarantee period, please return the machine to the

shop.Youneedtoprovidethecerticateofpurchaseinordertorepairorgetthesubstitute.

Before Packing, the machine should be cleaned, then use closed packaging, packaging should be

rm.Storethemachineindryplace.

For transportation safety. The machine should comply with ISTA.

Meaning of crossed - out wheeled dustbin:

Do not dispose of electrical machines as unsorted municipal waste, use separate collection

facilities.

Ifelectricalmachinesaredisposedofinlandllsordumps,hazardoussubstancescanleakinto

the groundwater and get into the food chain, damaging your health and well-being.

When replacing old machines with new ones, the retailer is legally obligated to take back your

old machine for disposals at least free of charge.

INSPECTION & MAINTENANCE



Purchaser’s Name & Address

Product Name

Product Serial No.

Invoice/DNNo.

DateofDelivery

Dealer’sOfceSeal

Dealer Sign

Customer Sign.

I/WeacceptthetermsandconditionsofWarranty

as in the Warranty Card.

CUSTOMER COPY

Warranty Card

Purchaser’s Name & Address

Product Name

Product Serial No.

Invoice/DNNo.

DateofDelivery

Dealer’sOfceSeal

Dealer Sign

Customer Sign.

I/WeacceptthetermsandconditionsofWarranty

as in the Warranty Card.

DEALER’S COPY

Warranty Card

Purchaser’s Name & Address

Product Name

Product Serial No.

Invoice/DNNo.

DateofDelivery

Dealer’sOfceSeal

Dealer Sign

Customer Sign.

I/WeacceptthetermsandconditionsofWarranty

as in the Warranty Card.

COMPANY COPY

Warranty Card

AMH 200 4S PRO+ Brush Cutter / Power Weeder

1. LIMITED WARRANTY PERIOD:ForaperiodofsixmonthsfromthedateofSale/deliveryoftheproductwhicheverisearlier.2.LIMITED

WARRANTYOBLIGATION:Replacementofdefectivepart(s)byauthorizeddealerarefreeofcharges.Iffounddefectivebyreasonsofdefective

material/poorworkmanship,partswillbereplacedandtherewillbenovaluere-imbursement.3.TERMS&CONDlTlONS:a.Claimsunder

warrantywillbeacceptedonsubmissionofWarrantyCarddulylledandstampedbyauthorizeddealertogetherwith theoriginalpurchase

document.:b.Shipping/transportation/Incidentalchargesincurredinreplacingdefectivepartsunderwarrantyshallbebornebythepurchaser.

WARRANTY null&voidif

(i) Lackofmaintenance,(ii)Incorrectuseofthemachineortampering,(iii)Useofnon-genuinespareparts,(iv)Usageofacids,solvents,orany

ammablematerials,(v)Non-usageoflterwater/clearwater/softwater&usingwaterabove40°Ctemperature,(vi)Whileusingthepressure

washerstodrawwaterwhichiscontaminatedwithdust&solvents(eg.paintthinners,gasoline,oil,etc.),(vii)Repairdonebyunauthorized

servicepeople,(viii)Thosepartssubjecttowear&tearduetonormaloperationsandplasticparts,rubberitemsetc,(ix)Looseconnections,

faultyelectricalxtures&uctuationsinpowersupply.

4. Shouldanyfailureoccurduringorafterthewarrantyperiod,customerdoesnothavetherighttointerruptpayment/pricediscount.

5. Incidentalorconsequentialdamageslikeinconveniencecommercialloss,lossoftie,mentalagonyetc.

6. Lossofanynatureduetooperationornon-operationisnotcoveredunderwarranty.

7. AllfreeserviceareatDealer’sservicepointonly.

8. Warrantyceasesifserviceisnotdoneperiodically.

9. TheattachedcardshouldbecompletedandreturnedtoRatnagiriImpexPvt.Ltd.forregistrationimmediatelyaftersale/delivery.

10. ThewarrantyisvoidunlessyouregisterthewarrantycardwithRatnagiriImpexPvt.Ltd.

11. ThedecisionofRatnagiriImpexPvt.Ltd.,insettlingthewarrantyisnalinallrespects.

12. All disputes are subject to Bangalore Courts Jurisdiction