Alemlube WP1290 User manual

Description
The WP1290 large capacity water hose reel is supplied complete with 30 metres of 12mm ID hose, a 1.2 metre long lead-in hose and
a water nozzle. Ideal for industrial, automotive, agricultural or garden applications where long lengths of hose are required, the WP1290
provides you with a cost effective means of storing and retrieving longer type hose assemblies in your workshop or garden. The reel
can be wall, ceiling or floor mounted and the detachable mounting bracket facilitates simple reel mounting and storage (if required).
The convenient carry handle also assists in the process of mounting and/or storing your new WP1290. The WP1290 has a maximum
working pressure of 140psi (10 bar).
Specifications
Operation
1 Check your WP1290 large capacity water hose reel for correct operation by
slowly pulling out the hose. A clicking noise will be heard every half revolution
of the sheave assembly.
2 To latch the reel, pull the hose out and allow it to latch after hearing the first,
second or third “click”.
3 To de-latch the reel, slowly pull out the hose until the clicking noises stop then
let the hose retract until the hose stop rests against the hose guide assembly.
Installation of Reel
1 You will need to purchase the appropriate hardware for the mounting of
your hose reel.
2 The base of the hose reel has three 10.5mm (13/32") drilled holes for mounting
the reel on a suitable flat surface. Figure A shows the correct location of the
3 mounting holes on the base of the reel.
3 Using the three holes in the base, mount the reel in the desired location.
Be sure to use appropriate hardware to tighten securely.
4 Connect the end of the inlet hose assembly to the desired source of supply.
5 If you require a non standard water nozzle, the existing nozzle can be easily
replaced with the nozzle of your choice. Check connections for any leaks.
Also, check the WP1290 for correct operation. See the operation section as
below.
6 If you wish to adjust the position of the hose stop, loosen the hose stop bolts, slide the
stop to a position close to the hose guide assembly and retighten the bolts, unlatch the
reel, pull the hose from the reel and allow the reel to latch at the desired length.
Large Capacity Water Hose Reel WP1290
OWNER’S TECHNICAL MANUAL
Warnings & Safety Issues
To avoid damaging your WP1290 large capacity water hose reel, always hold onto
the hose while it is rewinding back on to the sheave assembly. Failure to do so will
void the manufacturer’s warranty.
Also, periodically you will need to check the hose for wear and tear and check
the swivel tting for any leaks. Immediate replacement of any worn, damaged or
leaking parts is required.
General
Thank you for choosing to buy and use the WP1290 Large Capacity Water Hose Reel supplied by Alemlube.
We trust that the WP1290 proves to be a reliable, time saving, cost saving and a productivity increasing piece of
equipment for you and your company.
Uses Water
Hose Length 30 metres of 12mm ID hose
Materials Plastic covers and sheave assembly, steel spring and pvc hose
Weight 15kg
Outlet/Inlet Standard water nozzle and 3/4" BSP (f) inlet
Max. Temperature 60ºc
Visit our website at www.alemlube.com.au or www.alemlube.co.nz
NSW/ACT
TEL: [phone]
FAX: [phone]
QLD/PNG
TEL: [phone]
FAX: [phone]
VIC/TAS
TEL: [phone]
FAX: [phone]
WA
TEL: [phone]
FAX: [phone]
SA/NT
TEL: [phone]
FAX: [phone]
NZ
TEL: [phone]
FAX: [phone]

Item
No. Part No. Description QTY Item
No. Part No. Description QTY
1 WP1290-1 Cover 1 23 WP1290-23 Roller axle 2
2 WP1290-2 Hose 1 24 WP1290-24 Roller frame 1
3 WP1290-3 Elbow fitting 2 25 WP1290-25 Spring 2
4 WP1290-4 Fitting 1 26 WP1290-26 Support bushing 2
5 WP1290-5 O-ring 2 27 WP1290-27 Bracket 1
6 WP1290-6 Screw 20 28 WP1290-28 Taxis 1
7 WP1290-7 Swivel spool 1 29 WP1290-29 Drum 1
8 WP1290-8 O-ring 2 30 WP1290-30 Ratchet Paw 1
9 WP1290-9 Screw 4 31 WP1290-31 Spring dog 1
10 WP1290-10 Bushing 1 32 WP1290-32 Washer 1
11 WP1290-11 Outer casing 1 33 WP1290-33 Washer 1
12 WP1290-12 Baffle 1 34 WP1290-34 Spring axle 1
13 WP1290-13 Big gear 1 35 WP1290-35 Spring cover 1
14 WP1290-14 Swivel body 1 36 WP1290-36 Spring core 1
15 WP1290-15 Small gear 1 37 WP1290-37 Main spring 1
16 WP1290-16 Drum 1 38 WP1290-38 Screw 13
17 WP1290-17 Taxis axle 1 39 WP1290-39 Outer casing 1
18 WP1290-18 Roller 1 40 WP1290-40 Rail 1
19 WP1290-19 Moving unit 1 41 WP1290-41 Screw 2
20 WP1290-20 Mandril 1 42 WP1290-42 Elbow fitting 1
21 WP1290-21 Handle 1 43 WP1290-43 Hose stop assy 1
22 WP1290-22 Roller 2 44 WP1290-44 O-ring 2
2
Ordering Spare Parts
Parts and Drawing Breakdown for
WP1290 Large Capacity Water Hose Reel
Visit our website at www.alemlube.com.au or www.alemlube.co.nz
NSW/ACT
TEL: [phone]
FAX: [phone]
QLD/PNG
TEL: [phone]
FAX: [phone]
VIC/TAS
TEL: [phone]
FAX: [phone]
WA
TEL: [phone]
FAX: [phone]
SA/NT
TEL: [phone]
FAX: [phone]
NZ
TEL: [phone]
FAX: [phone]