Allen + Roth HAVERHILL TJ-0113V4822BR User manual

Welcoming
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
1
Questions, problems, missing parts? Call our customer service department at
866-439-9800, 8 a.m - 8 p.m.. EST, Monday - Sunday. You could also contact us at
[email protected].
AS23192
Sophisticated Inspiring
MODEL # TJ-0113V4822BR, TJ-0113V4822GR
48" HAVERHILL VANITY WITH TOP
ITEM #5288056, 5288051
MODEL NUMBER DESCRIPTION
TJ-0113V4822BR
TJ-0113V4822GR
Haverhill Vanity With Top Combo Summer Oak Finish Engineered
Black Marble Top
Haverhill Vanity With Top Combo Weathered Oak Finish Engineered
Black Marble Top
ALLEN + ROTH and logo design are trademarks
or registered trademarks of LF, LLC.
R
All rights reserved.

2
TABLE OF CONTENTS
Package Contents...............................................................................................................3
Safety Instructions..............................................................................................................3
Preparation.........................................................................................................................4
Assembly or Installation Instructions...................................................................................4
Care and Maintenance........................................................................................................8
Warranty..............................................................................................................................8
Replacement Parts List........................................................................................................9
Optional-Remove Top.........................................................................................................11

PACKAGE CONTENTS
A
C
B
PART DESCRIPTION QUANTITY
A
B
Vanity 1
1
Backsplash
C
1
Vanity top
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
WARNING
Unpacking requires two adults and several steps are more easily handled with two
adults.
CAUTION
DO NOT try to pry off top from vanity, as damage to top or vanity may occur.
Follow these instructions closely, take your time, and use care while assembling
this vanity.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
3

1
Adjusting the leveler
Adjust the leg levelers to ensure that the vanity is even.
1.
4
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Installation Time: 20-30 minutes (24 hours for silicone caulk to dry).
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors,
silicone caulk, power drill with drill bit.
Helpful Tools (not included): Measuring tape, level.
INSTALLATION INSTRUCTIONS

5
INSTALLATION INSTRUCTIONS
Removing the drawer (optional)
Fully extend the drawer.
Pull the two latches outward under slide of the drawer to release the lock.
Simultaneously tilt and lift the drawer upwards to pull it out of the Vanity (A).
3.
Adjusting the shelves
Remove the shelf screws securing the shelf to the shelf bracket.
Remove the shelf from the cabinet.
Insert the shelf pins into the desired holes. Ensure that all the shelf pins are level.
Gently insert the shelf into the vanity and secure it to the shelf pins using the shelf
screws.
2.
2
3

6
INSTALLATION INSTRUCTIONS
Removing the door (optional)
4.
Slide the door in the middle where two brackets could pass throw two holes under the
top metal rail.
Gently lift up the door, take bottom of door out of the bottom metal rail first, then take
the whole door out. (Other door do the same)
Note: In case replacing the slider sub-assembly, untighten the bolts with
Allen wrench (not included).
4

7
INSTALLATION INSTRUCTIONS
Gently remove excess glue from the connecting
area.
Installing the Backsplash
6.
Let the vanity and backsplash sit for 24 hour
before use.
Installing the Backsplash7.
5.Installing the Backsplash
C
A
B
5
7
6
5.
Apply silicone to the back and one long
edge of the Backsplash (C).
Place the Backsplash (C) on the vanity (A). Be
sure to align the Backsplash (C) with the top (B)
of the vanity (A).
Allow the silicone to dry before using the
vanity.

8
CARE AND MAINTENANCE
Dust the vanity regularly with a soft, non-lint producing cloth or household dusting
product.
You can clean the vanity with a gentle, non-abrasive household cleaner.
Make sure to dry the wood immediately with a soft cloth or towel.
The stone top can be cleaned using standard marble cleaning agents available at your
local supplier.
Shade variations and patterns are an inherent characteristic of stone (e.g. granite,
marble, engineered stone). Stone tops will vary from product to product. Use caution
placing items such as soap or any fragranced material on the stone surface. Use a
soap dish, coaster or similar item to protect the surface if placing any soap or
fragranced products on the stone.
If soap or fragranced products come in contact with the stone top, rinse the surface with
water and dry using a soft non-abrasive cloth.
WARNING: Must use cleaning agents safe for stone. check your cleaning agents use
restrictions before using on any stone. Damage to the stone may result. Vanity
manufacturer not responsible for damage caused by improper cleaning agents or soaps
used. Warranty will not cover damage caused by the use of improper soaps or cleaning
agents.
DO NOT use products to clean the stone top that contain acetone, lemon, vinegar or
other acids as these may cause damage to the stone surface.
Periodically reseal the stone top using an appropriate stone sealer available from your
local home store. Follow the manufacturer’s directions on how to apply.
WARRANTY
The manufacturer warrants this item against defects in materials and workmanship for
a period of one (1) year from the date of original retail purchase. This warranty applies
only to the original purchaser. This warranty does not apply to any damage on the
product by accident, misuse, or modified, improper installation or by affixing
accessories not produced by the manufacturer. The manufacturer is not accountable
whatsoever for product installation during the warranty period.
There is no further expressed warranty. The manufacturer shall not be legally
responsible for incidental, consequential or special damages arising at or in connection
with product use or performance except as may otherwise be accorded by law. The
manufacturer disclaims any and all implied warranties.
IMPORTANT

9
D F G
H
H
G
E
C
F
E
D
I
I
AA BB
CC DD
EE
II
FF
GG HH
PART DESCRIPTION PART#
C
D
Backsplash
Top drawer box (Brown)
Left door (Brown)
AA
BB
CC
DD
EE
F
TJ-0113V4822-BL
TJ-0113V4822-LD (BR)
TJ-0113V4822-TDB (BR)
E
Bottom drawer box (Brown) TJ-0113V4822-BDB (BR)
Right door (Brown) TJ-0113V4822-RD (BR)
G
FF
GG
HH
II
Left adjustable shelf (Brown) TJ-0113V4822-LAS (BR)
H
Right adjustable shelf (Brown) TJ-0113V4822-RAS (BR)
I
Door handle with bolt
Adjustable leveler
Under mount glide set
Drawer handle with screw TJ-0113V-DHS
TJ-0113V-DHB
TJ-0113V-UG
TJ-0113V-AL
TJ-0113V-SA
Slider sub-assembly
TJ-0113V-DB
TJ-0113V-PC
TJ-0113V4822-TMR
Plastic covering
Door bracket
Top metal rail
Shelf support with screw TJ-0113V-SS
For replacement parts, call our customer service department at 866-439-9800, 8 a.m.
- 8 p.m., EST, Monday - Sunday. You could also contact us at [email protected].
REPLACEMENT PARTS LIST FOR # TJ-0113V4822BR

10
D F G
H
H
G
E
C
F
E
D
I
I
AA BB
CC DD
EE
II
FF
GG HH
PART DESCRIPTION PART#
C
D
Backsplash
Top drawer box (Grey)
Left door (Grey)
AA
BB
CC
DD
EE
F
TJ-0113V4822-BL
TJ-0113V4822-LD (GR)
TJ-0113V4822-TDB (GR)
E
Bottom drawer box (Grey) TJ-0113V4822-BDB (GR)
Right door (Grey) TJ-0113V4822-RD (GR)
G
FF
GG
HH
II
Left adjustable shelf (Grey) TJ-0113V4822-LAS (GR)
H
Right adjustable shelf (Grey) TJ-0113V4822-RAS (GR)
I
Door handle with bolt
Adjustable leveler
Under mount glide set
Drawer handle with screw TJ-0113V-DHS
TJ-0113V-DHB
TJ-0113V-UG
TJ-0113V-AL
TJ-0113V-SA
Slider sub-assembly
TJ-0113V-DB
TJ-0113V-PC
TJ-0113V4822-TMR
Plastic covering
Door bracket
Top metal rail
Shelf support with screw TJ-0113V-SS
For replacement parts, call our customer service department at 866-439-9800, 8 a.m.
- 8 p.m., EST, Monday - Sunday. You could also contact us at [email protected].
REPLACEMENT PARTS LIST FOR # TJ-0113V4822GR
Printed in Vietnam
ALLEN + ROTH and logo design are trademarks or registered
trademarks of LF, LLC. All rights reserved.

11
1.
2. Take out the top.
Wood screws 9
No. Sketch Qty
Pull out the top drawer.
Pull the doors in the middle then take out the screws.
A
1
2
OPTIONAL-REMOVE TOP

12
3.
*Note:When vanity top is preinstalled.
4.
Reinstalling the existing top.
Install the top drawers.
Place back the top on the vanity.
Tighten these screws.Pull the doors back its place
3
4
OPTIONAL-REMOVE TOP