Allen + Roth RIAN 60 User manual

PAGE 1
RIAN 60 VANITY
60” [1524]
22” [560]
34 3/4” [882]
37 3/4” [958]
Measures: inch [millimeter]
ITEM #: 5288433, 5288436
ALLEN + ROTH and logo design are trademarks or registered trademarks of LF, LLC. All
Rights Reserved
ALLEN + ROTH et son logo sont des marques commerciales ou des marques déposées de
LF, LLC. Tous droits réservés
ALLEN + ROTH y el diseño del logo son marcas comerciales o marcas registradas de LF,
LLC. Todos los derechos reservados
MODEL#: RIAN 60WW, RIAN 60SG
Unique Identier (UID): _________________________ Purchase Date: ________________________
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday.
You may also contact us anytime at [email protected].
2023-03-09

PAGE 2
TABLE OF CONTENTS
PACKAGE CONTENTS.................................................................................................................................................3
TOOLS REQUIRED.......................................................................................................................................................4
SAFETY INFORMATION...............................................................................................................................................5
PREPARATION..............................................................................................................................................................5
ASSEMBLY INSTRUCTIONS........................................................................................................................................6
SHELF ADJUSTMENT...................................................................................................................................................8
HOW TO ADJUST THE DRAWER................................................................................................................................9
HOW TO ADJUST THE DOOR’S POSITION...............................................................................................................10
CARE AND MAINTENANCE.......................................................................................................................................11
WARRANTY.................................................................................................................................................................11
34 3/4” [882]
60” [1524]
60” [1524]
10” [254]
6x ø1 3/8” [35]
2xø1 3/4” [44]
22” [560]
4” [102]4” [102]
14 15/16” [379] 12” [305]
8 1/4” [210]
PRODUCT SPECIFICATIONS
4” [102]4” [102]
10” [254]

PAGE 3
B
A
C
D
E
H
F
P
Q
K
M
O
L
PART # DESCRIPTION QUANTITY
ACountertop 1
BBacksplash 1
CBasin 2
D Tilt-down drawer 2
E Top drawer 1
FDrawer 1
GDouble depth drawer 1
HDoor (left) 2
IDoor (right) 2
PACKAGE CONTENTS
G
I
R
J
N

PAGE 4
PART # DESCRIPTION QUANTITY
JAdjustable shelf 2
KHinge (tilt-down drawer) 4
LHinge (door) 8
M Buttery hinge (left) 1
NButtery hinge (right) 1
OShelf holder 8
P Handle 6
QKnob 4
RDrawer glides 3
Plastering trowelScrewdriver SiliconeCutterLevelPencil
PACKAGE CONTENTS
TOOLS REQUIRED (not supplied)

PAGE 5
SAFETY INFORMATION
• Please read and understand this entire manual before attempting to assemble, operate or install the product.
• Keep small parts away from children during assembly.
• Failure to follow warnings and cautions could result in serious injury.
• DO NOT use harsh bathroom cleaners or grout cleaners on any natural stone.
WARNING
• Read these instructions carefully and keep in a safe place.
• Adult assembly required.
• Do not over tighten connectors (screws, bolts, etc.) Overtightening can lead to product damage.
• Small parts may present choking hazard prior to assembly.
• Do not stand, step or climb on unit.
CAUTION
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or
damaged, do not attempt to assemble the product.
• USE preventative cleaning mesures to keep your stone pristine.
• USE sealers according to the product specic directions.
• Blot spills quickly, and wash with mild soap and warm water.
• Stone countertops (Granite, Marble, etc.) are suprisingly resiliant to stains and scratches. However, as a preventative measure, any spills on
the stone surfaces should be wiped up within a reasonable amount of time. Do not let liquid sit on the stone overnight. Stones are most prone to
staining by oil and acid, so be sure to blot these spills as soon as they happen. Follow up by cleaning the stone with a mild nonabrasive soap and
water.
• Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing,
contact The DISTRIBUTOR to obtain any missing parts.
• Using abrasive cleansers will damage the surface.

PAGE 6
1. Remove the countertop (A) from its vanity base and place it on a
protective covering on the oor to avoid any damage/scratches to the
countertop (A) or oor. Remove the protective foam from the vanity
base as illustrated.
1
2
3
ASSEMBLY INSTRUCTIONS
2. Apply silicone lines onto the vanity’s top where the countertop (A)
will be placed. Place the countertop (A) on top of the vanity. (Allow it
dry for 24 hours)
3. Wipe o󰀨 the area on the top of the countertop (A) where the
backsplash (B) will sit using a clean cloth. Apply a line of silicone onto
the unnished bottom side of the backsplash (B). Align the backsplash
(B) with the back edge. Slowly lower it onto the countertop (A) and
gently press to adhere. (Allow it dry for 24 hours)
A
A
B
A
24H!
Apply silicone onto the unnished bottom side and rotate it to install.

PAGE 7
4. Wipe away any seeping silicone from underneath the backsplash
(B) with a trowel and clean cloth. Place the metal ring and tube as
illustrated.
4
5
ASSEMBLY INSTRUCTIONS
5. Installation Complete - Allow the vanity to dry for 24 hours before
use.
For further information regarding adjustments and maintenance
please see below.
B
24H!

PAGE 8
*Each shelf can be removed or repositioned to create more space:
6.1. Uninstall the screws and remove the shelf (J).
6.2. Pull out the shelf holders (O).
7.1. Select your desired location and push the shelf holder (O) into place on both the right and left sides.
7.2. Place the shelf (J) onto the shelf holders (O). Make sure the shelf is properly level, and use screws to secure the shelf to the shelf
holder.
7.1
6.1
7.2
6.2
SHELF ADJUSTMENT (HOW TO REMOVE)
SHELF ADJUSTMENT (HOW TO INSTALL)

PAGE 9
*If necessary, each drawer is designed to be removed or replaced:
DRAWER REMOVAL:
8.1. Pull out the drawer until the lock pins located at the bottom of the drawer are easy to reach.
8.2. Pull out the lock pins located at the bottom of the drawer to the sides to release the pins.
8.3. Lift the drawer from the front side.
8.4. Pull out the drawer to remove it.
9.1 9.2
9.3
DRAWER INSTALLATION:
9.1. Place the drawer back in rst so that the drawer slides into the glide tab.
9.2. Put down and insert the drawer into the glides.
9.3. Completely slide in the drawer, then the drawer will automatically click in place.
8.1
8.3
8.2
8.4
Bottom View
Drawer
HOW TO ADJUST THE DRAWER

PAGE 10
1
2
3
To adjust the door front In and Out in-depth, rotate the adjustment screw (A).
A
B
C
In
Out
To adjust the door front Left and Right, rotate the adjustment screw (B).
Left
Right
To adjust the door front Up and Down in height, rotate the adjustment screw (C).
Down
Up
In
Out
Right
Left
Up
Down
HOW TO ADJUST THE DOOR’S POSITION