Allied Telesis AT-WA7400 User manual

Allied Telesis www.alliedtelesis.com
Datasheet | Wireless
AT-WA7400
Dual-radio Enterprise-class Wireless LAN Access Point
A
T-WA7400-xx
Dual-radio Enterprise-class Wireless Access
Point
Compact, Feature-Rich Design
The AT-WA7400 dual-radio enterprise-class
wireless access point includes radios that
operate within both 2.4GHz and 5GHz
frequency bands. It is fully compliant with IEEE
802.11a, b, and g standards and offers superior
performance with the latest security features
and a suite of advanced management tools.
Advanced Security
The AT-WA7400 is equipped with advanced
encryption and authentication capabilities,
including: WPA/WPA2, WEP with weak IV
avoidance,TKIP, AES/CCMP encryption, MAC
address filtering, access control via Radius with
EAP and PEAP.
Secure your wireless network by segmenting
public and private access with multiple BSSIDs,
MAC Addresses and VLAN Tagging. Rogue AP
detection provides the ability to detect and
locate unauthorized access points, thus
preventing unauthorized entry to your wireless
network.
Advanced WLAN
Management Features
The AT-WA7400 supports a wide range of
Wireless LAN (WLAN) management functions
such as adjustable output power levels, wireless
bridging (WDS), automated roaming, remote
configuration and software upgrades.
AT-WA7400 offers an advanced load balancing
feature, which allows you to balance the
distribution of wireless client connections across
multiple access points improving performance
and bandwidth utilization.
Configuration and administration are automated
across a network of AT-WA7400s, reducing the
need for IT personnel to configure complex
meshes.
These features help make your WLAN an
integral part of your whole wireless network.
Key Features
•High-performance 54Mbps (802.11a/g)
data rate
•Security support via 802.11i (WPA2),
WPA-PSK,TKIP,AES, IEEE 802.1x, and
EAP/802.1
•Multiple BSSID and Virtual LAN (VLANs)
•Inhibit SSID broadcast and Ignore SSID scan
•Media Access Control (MAC) for wireless
Interface
•Load Balancing
•802.11e (WMM only)
•Wireless Distribution System (WDS)
for Wireless Bridge and repeater modes
support
•AP Clustering
•Rogue AP detection
•Transmit Power Control/limiting
•Secured AP management
•Power-over-Ethernet capable
•Wi-Fi and WPA certified

USA Headquarters |19800 North Creek Parkway |Suite 200 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 Tai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
©2006 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-00572-00 Rev. J
AT-WA7400 |Dual-radio Enterprise-class Wireless LAN Access Point
Wireless Radio Characteristics
IEEE 802.11g Wireless Radio
Frequency Band: 2.4GHz, actual frequencies vary by
country
Radio Type: IEEE 802.11b (11Mbps) and IEEE
802.11g: (54Mbps)
Modulation: 802.11g: Orthogonal Frequency
Division Multiplexing (OFDM)
•PSK @ 6 and 9 Mbps
•QPSK @ 12 and 18 Mbps
•16-QAM @ 24 and 36 Mbps
•64-QAM @ 48 and 54 Mbps
•802.11b and 802.11g: Direct
sequence spread spectrum (DSSS)
•DBPSK @ 1 Mbps
•DQPSK @ 2 Mbps
•CCK @ 5.5 and 11 Mbps
Radio Power Output: 12.5~18 dBm depending on
frequencies
Radio Data Rate: 54, 48, 36, 24, 18, 12, 9, and
6Mbps OFDM, 11 and 5.5Mbps
CCK and legacy 2 and 1Mbps
data rates.
Channels: United States (FCC) 11 Channels,
Europe (ETSI) 13 Channels,
Other countries per local
regulations
Maximum Transmit Powersettings
(802.11g and 802.11a)
Full power 63 mW (18 dBm)
1/2 Power 32 mW (15 dBm)
1/4 Power 16 mW (12 dBm)
1/8 Power 6 mW (8 dBm)
1/16 Power 4 mW (6 dBm)
ReceiveSensitivity
(For 802.11g)
6Mbps: -90 dBm
9Mbps: -84 dBm
12 Mbps: -82 dBm
18 Mbps: -80 dBm
24 Mbps: -77 dBm
36 Mbps: -73 dBm
48 Mbps: -72 dBm
54 Mbps: -72 dBm
Wireless Features
Dynamic channel planning
Auto channel selection
Transmit Power Control/Limiting
Wireless Distribution System
Load Balancing
Virtual wireless network via multiple BSSIDs
Management
Management Interfaces: Telnet and Web
SNMP Agent:
SNMPv1 v2c supported
Web-based Management Tool
Single-View of clustered APs
Single-click firmware upgrade
Upload and download text-based configuration file via
HTTP browser
Firmware upgrade via HTTP browser
Physical Characteristics
Dimensions: 176 x 101 x 30 mm (W x D x H)
Weight: 250g (.55 lbs)
Security
64, 128, 152 bits WEP, Static and Dynamic Mode
Weak IV Avoidance
MAC Access Control for Wireless interface
EAP and 802.1x support
Open/Shared Authentication
WPA, WPA-PSK Compliant
WPAwith TKIP/AES support
Supports IEEE 802.11i (WPA2)
Per-VLAN-based Authentication policy
Inhibit SSID broadcast and Ignore SSID scan
Technical Specifications
Power Characteristics
Input voltage: Power-over-Ethernet
Voltage Range: 36 to 57VDC
Current: 350 mA @ 48 volts
Detection Methods: IEEE 802.3af standard
Optional DC Power: 5V, 2.8Amp Switching DC
Power Adapter
Environmental Specifications
Operating Temp. 0°C to +50°C
Operating Humidity: 10% to 90% Relative
humidity, non-condensing
Storage Temp. -20°C to +70°C
Storage Humidity: 10% to 95% Relativehumidity,
non-condensing
Ordering Information
AT-WA7400-xx
Dual-radio Enterprise-class Wireless Access Point
Where xx = 10 for North America
=30 for UK
=40 for Australia
=50 for Europe
Customers are responsible to comply with frequency
regulations in their individual countries. Please look
at the product manual for more details.
Antenna Options
Contact your Allied Telesis sales representative for
more information regarding antenna options
Network Protocol And
Standards Compatibility
IEEE802.3 CSMA/CD
IEEE802.3u 100BaseTX
IEEE802.11g
IEEE 802.11i
IEEE802.1x
Draft IEEE 802.11f
Draft IEEE 802.11e
Standards Compliance
Regulatory Approvals
EN 55022 / CISPR 22 Class B;
FCC Part 15, Class B
CE Marked, compliant with RTT&E, EMC, LVD
Directives; UL listed, UL 1950/C22.2 #950 IEC;
TUV Licensed, EN 60950 & EN 60539-IP53;
Radio Approvals
IEEE 802.11b/g
FCC Part 15B, 15B and 15E Certified;
EN 301 893;
EN 301 489 transmitter EMC;
Canada IC
CE Mark emissions/immunity;
TUV/GS License; EN 60950 CB.
Others upon request