Allmatic AV4 Guide

AV4
CONTROL UNIT FOR MANUAL CONTROL UP TO 4 TUBULAR MOTORSCONTROL UNIT FOR MANUAL CONTROL UP TO 4 TUBULAR MOTORS
6-1621227 - rev. 2 - 12/12/2022
ENGLISH - Translated from the original language
INSTALLATION AND USE MANUAL

12/12/2022 - rev. 2 - 6-16212272- English - Translated from the original language
PRODUCT VIEW
Overall dimensions: 140.50 x 182.00 x 80.60 mm
Dimensions of the mounting holes: 114.00 x 156.00 mm
1. Connect the 230vac power supply as shown.
2. If an engine operates in the wrong direction reverse the appropriate Black and Brown cables.
ATTENTION
• Connect all ground wires of tubular motors together with the ground.
• The maximum current absorbed for each output is 4 A.
INSTALLATION

6-1621227 - rev. 2 - 12/12/2022 Translated from the original language - English - 3
WIRING FOR GROUP CONTROL
WIRING FOR INDIVIDUAL CONTROL
Individual Keyswitches: It allows the individual operation of the tubular motors through their corresponding selector.
ATTENTION
• Activate only one engine at a time.
Master Keyswitch: Allows all connected motors to operate simultaneously.
ATTENTION
• The maximum total load allowed for group control is 6.3 A.

ALLMATIC S.r.l
32026 Borgo Valbelluna - Belluno – Italy
Via dell’Artigiano, n°1 – Z.A.
Tel. [phone] – 751163 r.a. Fax [phone]
www.allmatic.com - E-mail: [email protected]
WARRANTY
The manufacturer’s warranty is valid from the date stamped on the product and is limited to the repair or replacement free of
charge of the parts recognized by the same as defective due to lack of essential quality in the materials or lack of processing.
The warranty does not cover damage or defects due to external agents, maintenance deficiency, overload, natural wear, choice
of incorrect type, assembly error, or other causes not attributable to the manufacturer. Tampered products will not be guaran-
teed or repaired. The data given are purely indicative. No liability may be charged for reductions in scope or malfunctions due to
environmental interference. The liability of the manufacturer for damage caused to anyone by accidents of any nature caused by
our defective products, are only those that derive from the Italian law.
PRODUCT DISPOSAL
This product is an integral part of automation, and therefore must be disposed of together with it. As with installation operations,
even at the end of the life of this product, dismantling operations must be carried out by qualified personnel. This product consists
of various types of materials: some can be recycled, others must be disposed of. Find out about the recycling or disposal systems
required by the regulations in force in your territory for this category of product.
WARNING
• Certain parts of the product may contain pollutants or dangerous substances which, if dispersed in the
environment, could have harmful eects on the environment and human health.
As indicated by the symbol on the side, it is forbidden to throw this product into household waste. Then
perform the “separate collection” for disposal, according to the methods provided by the regulations in
force in your territory, or return the product to the seller when buying a new equivalent product.
• The regulations in force at local level may provide for heavy penalties in case of improper disposal of this
product.