Alto-Shaam Vector H Series User manual

Vector Multi-Cook Oven
H Series
QG-46720• REV 1 •10/2019
Quick Start Guide
Read and understand all instructions in the Operator’s Manual.
How to Cook with Programmed Recipes
Before you begin Make sure:
▪The oven is preheated.
▪Your food is prepared and ready to cook.
Procedure To cook using a programmed recipe, do the following.
Step Action
1. Touch the recipes icon a. The Browse recipes screen displays.
2. Navigate to the recipe.
Touch the recipe b.
Touch the start icon c.
3. Select the chamber d.
Open the door and load the food into the chamber. Close the door.
Touch the start icon e.
VMC-TS-006641
a
VMC-TS-006644
b
c
VMC-TS-006647
d
e

Vector Multi-Cook Oven
H Series
QG-46720• REV 1 •10/2019
Quick Start Guide
During the cooking
process
The cooking status screen displays the details on the current cook setting.
During the cooking process:
Result At the end of the cooking process, the oven sounds an alert and the chamber
light and door handle flashes. The Cooking done screen displays.
Action Result
when Touch the hand icon
action is required,
to continue the cooking process.
Touch the chamber, to show the recipe details.
Touch and hold the chamber
number,
to show the current chamber temperature.
VMC-TS-006650