Alula Connect+ User manual

ALULA HARDWARE SETUP GUIDE FOR Connect+™
Follow these steps BEFORE POWERING UP DEVICE
If you are not a registered dealer with Alula, please visit
www.Alula.com/newpartner to register, or call 1.888.88.Alula.
You must rst register the customer and device on AlulaConnect.com
Once logged in to AlulaConnect.com, create a new account and register the
Connect+ to the account using the following process:
STOP!
1. Create Customer Account
Enter your customer’s information such as username, password and vital information
2. Register Hardware
Add device “Friendly Name”, i.e. “Smith Home”
Enter MAC ID and CRC found on panel
3. Notication Setting
Set customer’s notication preferences
4. Central Station
Add Central Station connection type, Caller ID number, and account number

Follow instructions on reverse side BEFORE POWERING UP DEVICE
PANEL
IF WIFI: PRESS AND HOLD ENROLL BUTTON ON PANEL
FOR 6 SECONDS (NETWORK LED WILL FLASH) AND WPS
BUTTON ON CUSTOMER’S ROUTER
IF CELLULAR: PROCEED TO STEP 3
IF ETHERNET: ATTACH ETHERNET TO PANEL & ROUTER
THEN PLUG INTO DESIRED LOCATION
47-0037-00 • RevE • 2021-07-23
Tech Support Line • (888) 88-ALULA • [phone]
alula.com
CHECK LEDs
PLUG INTO DESIRED LOCATION TO POWER CONNECT CABLE OR JOIN WPS
POWER:
GREEN BLINKS RAPIDLY
NETWORK CONNECTIVITY:
GREEN WHEN CONNECTED
PLATFORM CONNECTIVITY:
GREEN WHEN CONNECTED
ARMING STATUS:
GREEN: DISARMED RED: ARMED
TROUBLE - AMBER:
SYSTEM TROUBLE IS DETECTED
DOWNLOAD APPS FOR AN
INTERACTIVE EXPERIENCE
CENTRAL STATION CONNECTIVITY:
GREEN WHEN CONNECTED
RF ACTIVITY:
BLINKS RAPIDLY WHEN ANY SENSORS
ARE COMMUNICATING
SYSTEM FIRMWARE UPDATE LED:
ON - NO UPDATE NEEDED
BLINKING - UPDATE IN PROGRESS
OFF - UPDATE/SERVER CONNECTION
PENDING
3
3 3
4
CHECK LEDs